Download Article
Download Article
Removing vertical blinds is a simple task once you break down the process step by step. Each individual vane in the set must be removed before the entire structure can be taken down. You should be as careful as possible when taking down the blinds to avoid damage to them and to the wall they are attached to.
Steps
-
Remove the valance to reveal the top rail. Most vertical blinds have a valance, which is a decorative border covering the rail at the top where the vanes are attached. Hold the bottom of the valance and gently push it upwards to create a small gap between it and the clips holding each vane. Continue pushing the valance gently until it is no longer touching the clips. [1] X Research source- The clips holding each vane are also known as the vane carriers.
- Be sure to remove the valance gently or the clips will break off.
-
Rotate the blinds so that they are partially open. To remove the blinds easily, rotate the vanes so that they are not overlapping each other. Pull the bead chain on the side of the blinds to open them. Aim to have the vanes open on an angle rather than fully turned to the side. [2] X Research sourceAdvertisement -
Locate the vane carrier at the top of the vane. Each vane on a set of vertical blinds is attached with a vane carrier. Find the vane carrier at the top of the vane. The side of the vane carrier that faces out will have a hook-like shape to allow you to open it easily. [3] X Research source -
Slide a plastic card between the vane carrier and the vane. Position a flat, sturdy card under the bottom of the vane carrier, underneath the hook. Slide the card upwards to wedge it between the vane and the carrier. This will disrupt the grip that holds the vane in place and prevent you from breaking the thin plastic that runs along the top. [4] X Research source- A credit card is an ideal tool to wedge between the vane and carrier.
-
Gently detach the vane from the vane carrier. Once the card is wedged between the vane and the carrier, pull the vane downwards. Do this slowly to prevent damage to the vane. Once the vane is clear of the carrier, remove the card as well. [5] X Research source- The carriers that hold the vanes should not be removed from the blind rail.
- Be sure to place the vane in a cleared, clean spot to keep it in good condition.
Advertisement
-
Remove the bead chain from the blind rail. Each set of vertical blinds has a bead chain along the top that allows you to rotate the vanes open and closed. After removing the vanes, gently pull the chain out from the blind rail. If you plan to keep the blinds, be careful not to break the delicate chain while removing it. [6] X Research source- If your bead chain is broken or damaged, you can buy a new one at a window treatment store or online.
-
Use a flat head screwdriver to release the spring clips of the rail brackets. Examine the back of the blind rail to locate the brackets securing it in place. Insert a flat head screwdriver in the spring clips of each bracket. Twist the screwdriver slowly until the spring is released. [7] X Research source -
Take the blind rail off the wall. Hold the blind rail firmly once you release the springs in each bracket. Gently pull the rail away from the brackets. If the rail does not come down easily, check the brackets again to make sure that the springs have been released properly. [8] X Research source -
Remove the brackets and fill the holes if you aren't replacing the blinds. Use a screwdriver to remove the small screws attaching the brackets to your wall. To hide the holes, use a putty knife to apply plaster or joint compound. Paint over it once the surface is dry. [9] X Research source- If the screws are very tight, use an electric screwdriver instead of manual screwdriver.
- If there are wall anchors, you may have to remove them with needle-nose pliers. [10] X Research source
- If you are simply replacing the blinds, check to see if the new brackets are the same as the old ones and leave them there to save yourself time and trouble.
Advertisement
Video
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- You can prevent the need to remove vanes to clean them by dusting and wiping down your vertical blinds with soapy water once a week.Thanks
- Consider covering vertical blinds with curtains instead of removing them entirely if you don't like the look of them.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
- ↑ https://www.youtube.com/watch?v=NSXp9tDgvzc&feature=youtu.be&t=9/
- ↑ https://www.youtube.com/watch?v=DzjFN-6Ggsg&feature=youtu.be&t=22
- ↑ https://www.blinds.com/blog/how-to-fix-crooked-vertical-blinds//
- ↑ https://www.blinds.com/blog/how-to-fix-crooked-vertical-blinds/
- ↑ https://www.blinds.com/blog/how-to-fix-crooked-vertical-blinds/
- ↑ http://www.diyexplore.com/window-blinds/repairing-vertical-blinds
- ↑ https://www.youtube.com/watch?v=DzjFN-6Ggsg&feature=youtu.be&t=69
- ↑ https://www.youtube.com/watch?v=DzjFN-6Ggsg&feature=youtu.be&t=69
- ↑ https://www.youtube.com/watch?v=ifF_7kCHwD4&feature=youtu.be&t=120
About This Article
Article Summary
X
Removing your vertical blinds is an easy process that usually only requires a flat-head screwdriver. To remove the blind frames, you’ll need to remove the valance covering the blinds, insert your screwdriver into the spring clips of each bracket, then lift the blind rail off the wall. If you’re not going to replace the blinds, unscrew the brackets from the wall. If you only need to remove individual vanes, rotate the blinds so they’re partially open, and slide a plastic card into the clip holding the vane. This should cause it to detach from the blinds. For more tips, including how to remove the bead chain from your blinds, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 167,642 times.
Reader Success Stories
- "Mystery solved! Thank you so much for the very clear and detailed outline. I knew there must be a simple way to get these blinds down for cleaning. I was delighted to find these instructions." ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Mystery solved! Thank you so much for the very clear and detailed outline. I knew there must be a simple way to get these blinds down for cleaning. I was delighted to find these instructions."
..."
more
"It was very clear and precise. No chatter, no hype, just clear, straight info with clear pictures. Great article! Thank you!"
..."
more
"I was about to rip out my hair trying to figure out how the spring clips worked. This was so helpful. Thank you!"
"I always knew that a credit card could do more than increase my debt load! Thank you, very helpful!"
"Best description on how to remove the blind rails, thank you."
