PDF download Download Article PDF download Download Article

Have a water stain on your carpet? Water stains are usually easy to remove on your own with household ingredients. You'll want to remove the stain, though, because otherwise, mildew could grow in your carpet.

Method 1
Method 1 of 3:

Using Soap and Water to Remove the Stain

PDF download Download Article
  1. Before you move on to more detailed cleaning procedures, try to remove as much of the water you can.
    • Take a clean white cloth, and press it lightly against the water stain. This won’t work if it’s not a fresh spill, though.
    • Blot up as much of the water as you can. You could even try walking on the cloth to get more of the water to move from the carpet to the cloth.
    • You could also use paper towels to blot up the water on the carpet. Try putting a heavy object on the paper towels, and leaving it for an hour or so to blot up much of the water.
  2. Watermark wikiHow to Remove Water Stains From Carpet
    The first thing you should do is remove any sediment or dirt that has embedded itself in your carpet’s fibers in the area of the water stain.
    • To remove sediment and dirt, create a mixture of soap and water. You could also use non-bleach detergent for this process.
    • Any detergent with bleach in it risks creating damage to the carpet color. [1]
    • Mix 1 teaspoon (4.9 ml) of dishwashing soap with water in a bowl or other container, and then put a clean cloth into the mixture.
    Advertisement
  3. Watermark wikiHow to Remove Water Stains From Carpet
    Take the cloth covered with soap and water and gently rub it on the stain.
    • Don’t rub at it too hard or the carpet’s fibers could start to look worn. [2]
    • Start at the edges and work your way inward. You may find that the soap-and-water removes the water stain altogether as well.
    • The water-and-soap method may remove the stain completely if it's a small one. If that doesn't work, you will need to move on to other ingredients.
  4. It’s one thing if you spilled a glass of water on the carpet. Then, you know exactly where the leak came from.
    • It’s another thing if it came from an external source, like a leaking pipe. Carpet that gets repeatedly wet can mildew and smell.
    • Identify the source of the stain, and take steps to make sure it doesn’t reoccur. If it’s a plumbing issue, you’ll want to take care of it so the carpet doesn’t suffer further damage.
    • You may need to call a professional to help you fix the problem if, for example, your basement is overflowing. You might have roots in your pipes, for example.
  5. Advertisement
Method 2
Method 2 of 3:

Using Vinegar and Water to Remove the Stain

PDF download Download Article
  1. After using dish soap and water to remove dirt or sediment, if the water stain remains, you can try using vinegar and water as the mixture instead. [3]
    • Make sure that you use white vinegar. You could use 1 4 teaspoon (1.2 ml) of white vinegar for every 4 cups (950 ml) of water. You don’t need much vinegar. [4]
    • Take a clean cloth, dab it into the mixture, and then apply the solution on the water-stained area of the carpet. You could also use a hand-held sprayer to apply the mixture to the carpet.
    • Again, you should press lightly onto the carpet. It’s the pH in the vinegar that helps remove the water stain from the carpet.
  2. You won’t see the full effects of your efforts until the carpet is fully dry. You’ll want to back off, and let it do so naturally.
    • As the carpet dries, you should see the water stain gradually disappear. You may want to repeat the process if it’s vanished somewhat but not completely.
    • You shouldn’t apply heat to the carpet. Just make sure no one walks on it in that area until it dries naturally.
    • If the stain is a tough one or more deeply ingrained, you may need to leave the vinegar and water mixture on the stain for a few minutes before rubbing it away.
    • Place 1 teaspoon (4 g) of baking soda on the stain when it’s close to dry. The baking soda will help dry out and deodorize the fabric.
  3. Watermark wikiHow to Remove Water Stains From Carpet
    After you're done with using the water-and-vinegar mixture, try using a steam iron to remove the stain faster.
    • Put a towel over the carpet on top of the water stain. Don't apply the iron directly to the carpet or you could burn the carpet.
    • Now, put the steam iron on low on the steaming function. This will direct hot steam toward the stain.
    • Put the iron on the towel for a few minutes, and press gently onto the towel. Then, remove the iron.
  4. Advertisement
Method 3
Method 3 of 3:

Cleaning the Carpet with Chemicals

PDF download Download Article
  1. If the water damage is severe – for example if a pipe burst in your basement or it flooded or something like that – you may need to call professional carpet cleaners.
    • Professionals have devices to suck up water from carpet. They can also steam clean carpet to get out stubborn stains.
    • You may end up having to replace the carpet if the water damage is too severe or the carpet may give off a musty smell.
    • If you have carpet from natural fibers it might be a good idea to call a professional cleaning service because such carpets can be difficult to clean on your own.
  2. Rent or buy a steam cleaner . At most home improvement stores, and even some grocery stores, you can rent steam cleaners.
    • You could also purchase a steam cleaner at most home improvement stores. These are basically vacuum cleaners that apply a cleaning and water mixture to the carpet to clean it.
    • In addition to water stains, steam cleaners do a good job of lifting up other stubborn stains and can make your carpet almost look new.
    • The cost of renting these is probably between $30-50, depending on where you are located, and most stores that rent steam cleaners also have cleaning solution you can buy as well. You could also try a water/dry vacuum. These are special vacuums designed to suck up water. [5]
  3. For more stubborn stains, and stains with color in them (such as Kool-aid), you may need to turn to ammonia.
    • Fill an empty spray bottle with 1 part ammonia and 1 part hot water. Then, spray the concoction on the stain. [6]
    • Put a clean white towel or cloth on top of the stain, and rub gently at the water stain area with the cloth.
    • You may need to repeat this process several times until the stain is gone. Try the detergent and water or vinegar and water methods first.
  4. Watermark wikiHow to Remove Water Stains From Carpet
    You can buy carpet cleaner at most grocery stores in spray bottles. You could use the cleaner on the water stain.
    • Some carpet cleaners are designed to remove pet stains, like dog urine, from carpet. However, they will also work on water stains.
    • You could try the homemade method of water and vinegar before you apply chemicals to the stain, though. Move on to using chemicals when more natural procedures fail due to hardier stains.
    • As with the other methods, make sure you let the carpet dry naturally before people walk on it or use the area.
  5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What is the fastest way to dry the carpet without an iron after using vinegar and water?
    Michelle Driscoll, MPH
    Founder, Mulberry Maids
    Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.
    Founder, Mulberry Maids
    Expert Answer
    You should not apply any heat to the carpet in an effort to help it dry faster. You can blot up some of the moisture with a towel - but otherwise will just need to let the carpet air dry.
  • Question
    What if the vinegar smell persists on carpet after drying?
    Community Answer
    Just wait. Vinegar evaporates like alcohol, and the smell will soon follow.
  • Question
    What if the water stain is old and hardened?
    Community Answer
    Also, test a small area of the carpet first for color change, and then try the vinegar-and-water method to try hydrating the spot. If doing this several times doesn't work, try a professional carpet cleaner.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      • For natural fiber carpets, such as wool or cotton, the vinegar and water solution may draw out some of the natural dyes in the carpet. In this case, you may wish to contact a professional carpet cleaner.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Clean, white cloths
      • Paper towels
      • Soft brush
      • Distilled white vinegar
      • Water

      About This Article

      Article Summary X

      To remove water stains from carpet, start by blotting up as much of the water as possible. Next, dab the affected area with a mixture of water and dishwashing soap. If the stain does not lift, try using equal parts white vinegar and water, apply to a clean cloth, and dab at the stain. Remember to allow the stained area to fully dry before deciding if the stain is gone or not. If the stain is still there, you may want to consider using a store-bought carpet cleaner, a steam cleaner, or a professional carpet cleaner. If you want to learn how to use a commercial carpet cleaner for the water stains, keep reading the article!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 248,270 times.

      Reader Success Stories

      • Dr. Carol McKim

        Sep 7, 2017

        "I returned from my vacation happy that my plants were alive (using Plant Nanny), but found large water stains on ..." more
      Share your story

      Did this article help you?

      Advertisement