How to Remove Wine Labels for Collecting

PDF download Download Article
PDF download Download Article

Collecting wine labels has become an increasingly popular hobby. An intact wine label can be a wonderful way to remember a special occasion or a great glass of wine. If you’d like to carefully remove and preserve wine bottle labels, you’ll need to expose the adhesive backing to a heat source. Once it’s melted, use the edge of a utility knife to lift off a corner of the label and the whole thing should peel right off. Whether you use boiling water or an oven, work with caution and protect your hands from the hot glass bottle by wearing oven gloves.

Method 1
Method 1 of 4:

Filling the Bottle with Boiling Water

PDF download Download Article
  1. A wine bottle holds about 3 cups (710 mL) of liquid, so use this much water for each bottle you want to remove the label from. Pour the water into a kettle and bring it to a rolling boil. [1]
    • If you boil water in a saucepan, it will be much harder to pour it into the bottle later.
  2. Stand up your wine bottle in the sink. Wear an oven glove on one hand and use this to hold the wine bottle steady. If your kettle has a narrow spout, you can slowly pour the boiling water directly into the bottle. If not, consider using a funnel to get the water down the bottleneck more easily. [2]
    • Be careful not to splash yourself or the label while you pour the water into the bottle.
    Advertisement
  3. If your bottle is standing upright in your sink, simply leave it there for a few minutes. Allow about 5 to 10 minutes for the boiling water to melt the glue on the back of the label from the inside out. [3]
  4. Slip on a pair of oven gloves. After leaving the water in the bottle for a few minutes, grab ahold of the wine bottle and carefully tip out the hot water into the sink. Use caution as the glass will be hot. [4]
    • If necessary, use a towel to soak up any drips from the glass or the label.
  5. Once the water has been emptied out, use one hand to hold the bottle still. With the other hand, carefully slide the edge of a utility knife or razor blade underneath one corner of the wine label. Once it comes up, delicately lift off the rest of the label.
    • The great part about this technique is that you won’t need to get the label wet. This is a great way to remove special labels that you’re worried about damaging.
    • Be careful as you do this since the glass may still be hot.
    6. Advertisement
Method 2
Method 2 of 4:

Baking an Empty Bottle

PDF download Download Article
  1. Once you’ve finished off a bottle of wine, you can warm it up in the oven to melt the adhesive backing. Make sure your oven is empty, then set the temperature to 350 °F (177 °C).
    • Before you preheat the oven, you can set your bottle inside to see if it stays put without rolling around.
  2. Lay the bottle down on the center rack, making sure it doesn’t roll around. Turn the bottle so that the label you want to preserve faces upwards. Wait about 10 minutes for the adhesive on the back of the label to melt. [5]
    • If necessary, set the bottle in a glass casserole dish to hold it in place.
  3. After about 10 minutes, put oven gloves on both of your hands and carefully remove the wine bottle from the oven. It will be hot, so use caution! Set it on a cooling rack so it doesn’t leave any burn marks on your work surface.
  4. Slide the edge of a utility knife or razor blade underneath one corner of the label. Once you do this, slowly and gently peel the label off of the glass. Use the knife to cut through any stubborn patches of adhesive.
    • When you’re peeling back the label, use even, steady pressure to avoid ripping the paper.
    • If the label won’t budge, just let the bottle cool down to room temperature. You can try another method later.
  5. Since the melted adhesive backing will be sticky, you can allow it to air-dry or place it onto another material. If you’d like to wait for the glue to dry, leave the label face-down on a sheet of parchment paper overnight.
    • If you want to preserve it in a book or on a sheet of paper, place it onto the page while it’s still sticky and press down the edges to attach it.
    6. Advertisement


Method 3
Method 3 of 4:

Steaming off the Label

PDF download Download Article
  1. Fill a large stockpot about 1/3 of the way up with water. Place this onto a stovetop burner and set the temperature to high. Wait about 15 or 20 minutes for the water to reach a rolling boil. [6]
    • If you have a 2-piece pasta pot, use the base to hold the water. You’ll be able to place the wine bottle in the colander part.
  2. Wearing oven gloves, pick up the empty, uncorked bottle and hold it directly above the boiling water. Be careful not to allow the label to touch the water. Rotate the bottle every few minutes to expose the front and back of the label to the steam. [7]
    • Keep the water going at a steady simmer or rolling boil to keep generating steam.
    • The steam will gently melt the adhesive backing on many wine labels.
    • If you’re using a 2-piece pasta pot, lower the colander insert into the base. Then, stand the wine bottle up inside the colander.
    • Unless you’re using a colander insert, you’ll need to manually hold the bottle over the water while it steams to avoid getting it wet.
  3. The glass will be hot after having sat over the steam for a while, so make sure you’re wearing oven gloves. With the tip of a utility knife or razor blade, gently lift up one corner of the wine label. If it doesn’t budge, expose the bottle to the steam for another 10 or 15 minutes. Once it starts to come loose, slowly lift off the entire label. [8]
    • Once the adhesive has softened, the label should come off easily in one piece.
  4. If the label ends up being slightly damp after having been exposed to the steam, allow it to air-dry overnight. Set it on a sheet of parchment paper with the adhesive-side up. This will allow the glue to harden while the front of the label dries off. [9]
    • This is a useful technique to use on labels that you don’t want to submerge in water.
    5. Advertisement
Method 4
Method 4 of 4:

Soaking in Hot Water

PDF download Download Article
  1. Boil enough water to fill a stockpot about 2/3 of the way up. Make sure you use enough water to completely cover the entire wine label once you set the bottle into the pot.
    • You can use hot water from the tap instead, but it might not be as effective as just-boiled water.
  2. Stand up the bottle in the pot full of hot water. If necessary, add a little more water so that the top of the label is covered by the water. Leave it to soak for about 10 to 15 minutes or so.
    • If desired, you can purchase a chlorinated soap from a wine store that’s designed to help to dissolve the adhesive. Be sure to follow the manufacturer’s instructions so you use the product correctly.
  3. Put on a pair of rubber kitchen gloves to provide some grip and protect your hands from the hot water. Use caution as you lift out the wine bottle as it will be hot. Dry off the outside of the bottle with a towel.
  4. Once the bottle is dry, slide the blade of a utility knife underneath one of the corners of the label. Once it starts to come loose, carefully peel up the rest of the label. Work slowly to avoid tearing the label.
    • The hot water soak will have softened up the adhesive, so you should be able to preserve the label in one piece.
    • Be careful not to rub or scratch the damp paper as it will easily get damaged.
  5. Set the damp label on a piece of parchment paper face-down, if you want the adhesive to dry. Or, set it glue-side down onto a sheet of regular paper if you’d rather mount the label or preserve it in a journal. The moist glue will adhere to the paper. Leave the paper to air-dry overnight.
    • If the label curls up while it dries, you can press it flat within the pages of a heavy book once it’s totally dry.
    6. Advertisement

The Takeaway: Heating Off Wine Labels in One Piece

Pour about 3 cups (710 mL) of boiling water from a kettle into the empty, uncorked wine bottle and wait 5–10 minutes for the heat to melt the label’s adhesive. Then, pour out the hot water and carefully peel the label off of the bottle in one piece with the edge of a utility knife.

Community Q&A

Search
Add New Question
  • Question
    Can you remove wine labels with vinegar?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    This technique works for getting stubborn paper and adhesive off the bottle, but it won’t preserve the label itself. Pull off the label, then soak a paper towel or cotton ball in vinegar. Rub any remaining paper and adhesive residue with the vinegar until it wipes away.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 2
  • Question
    How do you remove wine labels without damaging them?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    Heating the bottle or soaking off the label may work, depending on the type of adhesive. Heat works better for a sticky adhesive, while soaking may be your best bet for a dry adhesive. Either way, you’ll need to peel the label off very slowly and carefully, with the help of a flat implement like a razor or box cutter blade.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 4
  • Question
    How do you remove etched on labels on glass?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    You may be able to buff it away with a brass wire wheel or gently scrape it away with a razor. Test out either of these techniques in an inconspicuous area or on a piece of glass that you don’t mind damaging, first.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 0
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Don’t be shy about asking a waiter if you can take your empty bottle home. They might be delighted to hear that you keep a label collection.
        Thanks
        Helpful 0 Not Helpful 0
      • Some labels won’t come off of the bottle intact. If you have trouble removing the label, snap a photo of the wine you enjoyed and add this photo to your label collection.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Never heat up a bottle full of wine. This will ruin the wine and may cause the glass to explode.
        Thanks
        Helpful 1 Not Helpful 0
      • While goo-removal products, soap, and abrasive brushes can be efficient at getting labels off of wine bottles, they will almost certainly destroy the label. Therefore, it’s best to avoid using these if you want to preserve your wine label.
        Thanks
        Helpful 1 Not Helpful 0
      • Only adults should attempt these methods, since the utility blade and hot glass bottle must be handled with care.
        Thanks
        Helpful 1 Not Helpful 1
      Advertisement

      Things You'll Need

      Filling the Bottle with Boiling Water

      • Kettle
      • Funnel (optional)
      • Water
      • Oven gloves
      • Utility knife
      • Parchment paper

      Baking an Empty Bottle

      • Oven
      • Oven gloves
      • Utility knife
      • Cooling rack
      • Parchment paper

      Steaming Off the Label

      • Water
      • Stockpot or 2-piece pasta pot
      • Oven gloves
      • Utility knife
      • Towel
      • Parchment paper

      Soaking in Hot Water

      • Water
      • Stockpot
      • Rubber kitchen gloves
      • Utility knife
      • Towel
      • Parchment paper

      You Might Also Like

      8 Awesome Ways to Open a Bottle of Wine without Using a Corkscrew
      How to
      Drink Wine
      How to
      Find out How Much Something Is Worth
      How to
      Date Old Ball Mason Jars
      How to
      Taxidermy Mammals, Birds, and Reptiles
      How to
      Clean Oyster Shells for Crafts
      Are My Old Stamps Worth Anything? Evaluating Condition, Rarity & More
      How to
      Fix Bent Trading Cards
      How to
      Display Jerseys on Your Wall
      How to
      Date Old Milk Cans
      How to
      Clean and Preserve Sand Dollars
      How to
      Sell Old 45 Records from the 50s
      How to
      Make Your Own Trading Cards
      How to
      Remove a Stamp from Its Envelope
      Advertisement

      References

      1. ↑ https://www.blueistyleblog.com/2015/05/RemoveWineBottleLabelsWithoutTearing.html
      2. ↑ https://www.blueistyleblog.com/2015/05/RemoveWineBottleLabelsWithoutTearing.html
      3. ↑ https://www.blueistyleblog.com/2015/05/RemoveWineBottleLabelsWithoutTearing.html
      4. ↑ https://www.blueistyleblog.com/2015/05/RemoveWineBottleLabelsWithoutTearing.html
      5. ↑ https://www.popularmechanics.com/home/how-to/a3085/how-to-remove-a-bottle-label/
      6. ↑ https://www.popularmechanics.com/home/how-to/a3085/how-to-remove-a-bottle-label/
      7. ↑ https://www.popularmechanics.com/home/how-to/a3085/how-to-remove-a-bottle-label/
      8. ↑ https://www.popularmechanics.com/home/how-to/a3085/how-to-remove-a-bottle-label/
      9. ↑ https://www.popularmechanics.com/home/how-to/a3085/how-to-remove-a-bottle-label/

      About This Article

      Article Summary X

      To easily remove wine labels for collecting, soak the empty bottle in a bath of hot water for 15 minutes. Then, remove the bottle from the water and gently begin to peel the label off of the bottle while it's still wet. Be careful not to tear the label, as it'll be fragile! Once you've removed the label, place it with the glue side facing upward on a clean surface to dry, which will prevent it from sticking to anything else before it dries. For tips on heating the bottle or using boiling water to remove the label, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 387,637 times.

      Reader Success Stories

      • Anonymous

        Jan 25

        "I've been wanting to start a wine tasting journal and this has been quite helpful! I didn't want to ruin ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement