How to Replace a Garbage Disposal

PDF download Download Article
PDF download Download Article

No need to worry if your garbage disposal is on the fritz—installing a new one is a straightforward project that you can do yourself in just a few minutes. Start by switching off the power to the disposal at your home’s breaker box to ensure that you can work safely. Next, remove the old unit by detaching it from the mounting ring directly beneath the sink drain. Finally, install any necessary new mounting hardware, fit the new disposal into place, and turn on the water to test for leaks before giving it a trial run.

Part 1
Part 1 of 3:

Removing the Old Disposal Unit

PDF download Download Article
  1. Head to your home’s main circuit breaker and find the switch corresponding to the garbage disposal unit. Flip the switch to the “Off” position. You’ll now be able to work safely without worrying about accidentally receiving a nasty shock. [1]
    • Garbage disposals are electrical appliances, which means there’s a live current running through them at all time while the power is on.
    • Make sure that the water is cut off to your garbage disposal, too. [2]
  2. Open the doors beneath your sink and take a look directly under the drain. You should see a large cylindrical object situated between the bottom of the drain and the plumbing pipes. This is the actual garbage disposal unit that you’ll be replacing.
    • Take note of the make and model of the disposal. Replacing it with a similar model will be as easy as removing the existing unit and screwing on the new one.
    Advertisement
  3. Locate the pipe extending from the side of the disposal into the ground plumbing. Loosen any nuts or fasteners at the pipe’s connection site and give it a firm tug to pull it free. [3]
    • The discharge tube is responsible for carrying ground food waste out of the disposal.
    • Some older garbage disposals are also connected to the dishwasher water supply via a second tube. This one can be disconnected in the same manner. [4]
  4. At the top of the unit you should see a thin metal ring with 3 separate lugs, or protruding arms. Take hold of these lugs with one hand and twist the entire ring counterclockwise about 1.5 inches (3.8 cm) to dislodge the old unit. Set it aside on a sheet of newspaper or unfolded rag to keep from making a mess. [5]
    • Garbage disposals tend to be surprisingly heavy (some can weigh as much as 15 pounds!), so be ready to catch and hold the unit once it comes away from the mounting ring.
    • It may be a good idea to place a couple paint cans, some wood scraps, or a stack of phone books beneath the disposal to act as a support platform. [6]
  5. Turn the unit over and look for the round or square faceplate on the underside. This is the cover for the electrical housing. Unscrew the faceplate and slip the copper ground wire over the green screw. Then, pinch the plastic wire connectors to disconnect the colored wires from the main power supply. [7]
    • A pair of needle-nosed pliers may come in handy for releasing wire connectors that are too small to unclip by hand.
    6. Advertisement
Part 2
Part 2 of 3:

Replacing Worn-Out Mounting Hardware

PDF download Download Article
  1. Peel away the rubber snap ring on the bottom of the mounting ring that’s holding it in place. The mounting ring itself should then simply slide off. [8]
    • If there’s a separate gasket sandwiched above the mounting ring, be sure to remove it as well.
    • Consider keeping your current mounting hardware if it looks to be in good shape. This will make installing the new disposal much quicker and easier. [9]
  2. Just below the sink flange where the drain empties into the garbage disposal you’ll see a circular plastic piece similar in appearance to the mounting ring. Insert the tip of a screwdriver into one of the lugs on this piece and rotate it in a counterclockwise direction. Pull the nut away and set it aside. [10]
    • You may have to apply a considerable amount of force to undo a mounting nut that’s had years to settle into place. If you're having trouble getting it to budge, try pushing the handle of the screwdriver with both hands rather than pulling. You'll get better leverage this way.
  3. The flange is the rounded metal rim that circles the drain opening. Wiggle or push on the bottom of the flange from underneath, then stand up and lift it out from the top. The old flange can also go into your pile of parts destined for disposal. [11]
    • If you see any dry, crusted remnants of plumber’s putty where the flange sat, use a putty knife to scrape it off. [12]
    • Pat the drain opening dry with a clean towel before attempting to use adhesive to secure the new flange.
  4. Apply a ring of fresh plumber’s putty around the edges of the underside of the flange (the surface that will rest against the sink basin). Fit the slender end into the drain opening and press the flange firmly into position. Hold it for 30 seconds to a minute while the putty begins to set up. [13]
    • Use a heavy object, such as a toolbox or the old garbage disposal unit, to keep constant pressure on the new flange until the adhesive has had time to fully dry. This may take anywhere from 10-20 minutes, depending on the specific product you're using.
    • The added weight will also prevent the flange from shifting as you install the new unit. [14]
    • You also have the option of using silicone sealant in place of traditional plumber’s putty. Many home improvement experts claim that silicone has a stronger hold and provides a longer-lasting watertight seal.
  5. Working in reverse order now, slide a rubber gasket over the bottom of the new sink flange, followed by a second metal flange. Position the new mounting ring last and insert screws into each of the open screw holes. Hold the assembly in place with one hand while you tighten the screws up against the lower flange with the other. [15]
    • Jiggle the new mounting assembly gently from the bottom to make sure it’s secure.
    6. Advertisement
Part 3
Part 3 of 3:

Installing the New Disposal

PDF download Download Article
  1. Lift the new unit into position, aligning the upper edge with the lower lip of the mounting ring. Twist the disposal to begin thread it into the grooves, then stick your screwdriver into 1 of the metal lugs and rotate the mounting ring clockwise until you feel the disposal lock in place. [16]
    • At this point, you can remove the weight you’ve been using to hold down the new sink flange.
  2. Unscrew the faceplate on the underside of the new unit. Match the colored wires on the power supply to those in the disposal’s electric housing and connect them using plastic wire nuts. Slip the copper grounding wire over the green screw at the far edge of the compartment. Replace the cover and tighten the screws.
    • Most garbage disposals only have 2 sets of connections—a pair of red wires and a pair of white or black wires. Any additional wires should also be color-coded for convenience.This will make putting them back together a breeze. [17]
    • For your own safety, it’s critical that the main power to the disposal remain off throughout this process.
  3. Align the end of the tube with the valve on the side of the new disposal unit and push it until sits flush over the opening. Tighten any nuts or other fasteners. [18]
    • For flexible hose connections, consider using a separate metal clamp to cinch the discharge tube to the disposal valve.
  4. If you’ve upgraded to a larger disposal or one of a different model, there’s a good chance that the discharge tube won’t be the right length to connect to the ground plumbing valve. Fortunately, this is a simple fix—mark the spot on the tube where it should line up with the drain pipe, then cut it to size with a hacksaw. It should be a perfect fit. [19]
    • If the discharge tube is too short to accommodate the new unit, you’ll need to make a trip down to your local home improvement store to pick up a new one with the appropriate dimensions.
  5. Turn on the faucet and let it run for 15-20 seconds. While it’s running, examine each of the connection sites around the new unit and make sure there’s no water seeping out. Assuming the individual components are nice and snug, you shouldn’t have any problems. [20]
    • Patch up any minor leaks you find using a strip of thread seal tape or a line of Teflon pipe joint compound. [21]
    • Before tackling a leak, don’t forget to dry off the plumbing fixtures so that the adhesive will be able to stick.
  6. Go back and flip the breaker for the garbage disposal into the “On” position. Return to the kitchen and flip the switch for the disposal to activate it. Listen to the way it sounds. It should run smoothly with no humming, grinding, or excessive vibration. Congratulate yourself on a job well done! [22]
    • Double check that you haven’t left any tools, screws, or other stray pieces in the sink. You don’t want them to fall down the disposal!
    • If the new disposal is making unusual noises or doesn’t seem to be operating correctly, call a professional plumber and have them take a closer look at it. There may be an issue with the inner mechanics of the unit itself.
    7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What causes a garbage disposal to get stuck?
    Jacob Pischer
    Home Improvement Specialist
    Jacob Pischer is a Home Improvement Specialist and the Owner of Helpful Badger, a home repair service in Portland, OR. With over four years of experience, Jacob specializes in a variety of handyman services including pressure washing, cleaning gutters, repairing drywall, fixing leaky plumbing fixtures, and repairing broken doors. Jacob studied at Madison Area Technical College and has a background in real estate investment.
    Jacob Pischer
    Home Improvement Specialist
    Expert Answer
    Fruit peels and chicken bones are pretty common offenders. They get stuck between the teeth of the disposal and the sidewall, which prevents the motor from turning.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    How do I fix my jammed garbage disposal?
    Jacob Pischer
    Home Improvement Specialist
    Jacob Pischer is a Home Improvement Specialist and the Owner of Helpful Badger, a home repair service in Portland, OR. With over four years of experience, Jacob specializes in a variety of handyman services including pressure washing, cleaning gutters, repairing drywall, fixing leaky plumbing fixtures, and repairing broken doors. Jacob studied at Madison Area Technical College and has a background in real estate investment.
    Jacob Pischer
    Home Improvement Specialist
    Expert Answer
    Take a hexagon screw or wrench and put it along the very bottom of the disposal, right in the center. Turn the tool both clockwise and counterclockwise to break up and loosen whatever's jamming the disposal. Then, press the little red reset button on the bottom of the unit to reset the device.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Read Video Transcript

      Tips

      • Garbage disposals come in several different sizes and power settings, ranging from basic â…“ horsepower units to souped-up 1 horsepower grinders for heavy-duty refuse. Choose a disposal with specs that suit your budget and needs in the kitchen.
        Thanks
        Helpful 2 Not Helpful 1
      • Many newer disposals are made with simplified constructions, complete with convenient features like built-in mounting assemblies and electrical cords that plug directly into a wall outlet. Upgrading to one of these units can save you time and labor compared to older disposal styles.
        Thanks
        Helpful 2 Not Helpful 1
      • Replacing a worn-out garbage disposal only costs $100-200 on average, and can be completed in less than an hour if you know what you’re doing.
        Thanks
        Helpful 1 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Keep your hands and tools a safe distance away from the disposal at all times while the main power is on to prevent accidents.
        Thanks
        Helpful 2 Not Helpful 0
      Advertisement

      Things You'll Need

      • Garbage disposal unit
      • Mounting assembly
      • Sink flange
      • Plumber's putty or silicone sealant
      • Thread seal tape or Teflon pipe joint compound (for sealing leaks)
      • Screwdriver
      • Hacksaw
      • Needle-nosed pliers (optional)
      • Permanent marker
      • Clean, dry towel

      You Might Also Like

      How to
      Wire an Electric Cooker
      How to
      Set a Boiler Timer
      How to
      Silence a Microwave
      How to
      Remove a Garbage Disposal
      How to
      Troubleshoot and Repair a Frigidaire Ice Maker
      How to
      Use a Dash Egg Cooker for Amazing Eggs Every Time
      How to
      Test a Microwave's Magnetron
      How to
      Use a Magic Bullet
      How to
      Fix an Ice Maker in a Whirlpool Refrigerator
      How to
      Wire a Garbage Disposal to a Switch
      How to
      Replace a Dishwasher Door Spring
      How to
      Stop an Air Fryer
      How to
      Clean a Dr. Brown's Bottle Warmer
      How to
      Remove a Glass from a Garbage Disposal
      Advertisement

      References

      1. ↑ https://www.thisoldhouse.com/plumbing/22291774/how-to-install-a-garbage-disposal
      2. ↑ Patrick Johns. Home Improvement Specialist. Expert Interview. 26 October 2021.
      3. ↑ http://www.planitdiy.com/how-to/plumbing/how-to-replace-your-garbage-disposal/
      4. ↑ https://www.familyhandyman.com/plumbing/how-to-replace-a-garbage-disposal/view-all/
      5. ↑ http://www.popularmechanics.com/home/how-to/a177/garbage-disposal-repair-installation/
      6. ↑ https://www.familyhandyman.com/plumbing/how-to-replace-a-garbage-disposal/view-all/
      7. ↑ https://www.youtube.com/watch?v=E6PZVEz_o-g&feature=youtu.be&t=146
      8. ↑ http://www.popularmechanics.com/home/how-to/a177/garbage-disposal-repair-installation/
      9. ↑ https://www.youtube.com/watch?v=E6PZVEz_o-g&feature=youtu.be&t=160
      1. ↑ https://www.thisoldhouse.com/plumbing/22291774/how-to-install-a-garbage-disposal
      2. ↑ https://www.thisoldhouse.com/plumbing/22291774/how-to-install-a-garbage-disposal
      3. ↑ https://www.youtube.com/watch?v=E6PZVEz_o-g&feature=youtu.be&t=184
      4. ↑ http://www.popularmechanics.com/home/how-to/a177/garbage-disposal-repair-installation/
      5. ↑ https://www.familyhandyman.com/plumbing/how-to-replace-a-garbage-disposal/view-all/
      6. ↑ https://www.youtube.com/watch?v=E6PZVEz_o-g&feature=youtu.be&t=206
      7. ↑ https://www.thisoldhouse.com/plumbing/22291774/how-to-install-a-garbage-disposal
      8. ↑ http://www.popularmechanics.com/home/how-to/a177/garbage-disposal-repair-installation/
      9. ↑ https://www.youtube.com/watch?v=E6PZVEz_o-g&feature=youtu.be&t=284
      10. ↑ https://www.familyhandyman.com/plumbing/how-to-replace-a-garbage-disposal/view-all/
      11. ↑ https://www.youtube.com/watch?v=E6PZVEz_o-g&feature=youtu.be&t=328
      12. ↑ https://www.familyhandyman.com/plumbing/stop-leaks-in-plumbing-joints/view-all/
      13. ↑ https://homesteady.com/how-7798507-troubleshooting-garbage-disposal-not-working.html

      About This Article

      Article Summary X

      Before replacing a garbage disposal, switch off power to the unit at the main circuit breaker. Disconnect the discharge tube that connects your garbage disposal to the ground plumbing, then twist the mounting ring at the top of the disposal clockwise to disconnect it from your drain. Unscrew the faceplate on the bottom of the unit to open the electrical housing, then slip the copper wire over the green screw. Pinch the plastic wire connecters to disconnect the wires from the power supply. Pull off the old mounting ring and loosen the nut holding the old mounting assembly in place, then pull out the old mounting assembly. Remove the old sink flange from your drain and clean up any adhesive residue. Apply a fresh ring of plumber’s putty and push the new flange into place. Hold it down with a heavy object for about 20 minutes while the putty dries. Screw the new mounting assembly into place beneath the sink. Insert the top of the new garbage disposal into the assembly and twist it to start threading it into the grooves of the mounting ring. Insert a screwdriver into one of the lugs on the mounting ring and use it to twist the ring clockwise until it locks into place. Open the electrical housing and match the colored wires from the power supply to the ones in the garbage disposal. Connect them with the plastic wire connecters. Slip the copper grounding wire over the green screw, then put the cover back on the housing. Push the discharge tube into place and tighten any nuts, clamps, or other fasteners to keep it in place. Run the faucet for 15-20 seconds to make sure your new disposal unit doesn’t leak, then switch the power back on and test the disposal to make sure it works. To learn how to replace worn-out mounting hardware or sink flanges, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 90,128 times.

      Did this article help you?

      Advertisement