How to Remove the Oil Light On Your Dashboard

PDF download Download Article
Use these quick and easy steps to get rid of that pesky oil light
PDF download Download Article

With your oil freshly changed, you excitedly get in your car to take it for a spin. But when you turn your car on, the change oil light is still beaming up at you from the dashboard. You might think that resetting the light is a difficult process, but for most cars it’s super easy and takes just a couple seconds! In this article, we’ll go over the steps you need to take to get rid of your change oil light for the most common car makes and models. These methods are split between cars that have a Vehicle Information Center (VIC) display, and those that don’t. Cars with a VIC have an interactive, electronic display on their dashboard or center console that is controlled by arrow buttons on the steering wheel or center console.

Things You Should Know

  • When resetting your oil light, turn your keys over in the ignition twice so your car has power and is in the “Run” or “II” position. Do not start your car’s engine.
  • If your car has an electronic VIC display on the dashboard, use the center console or wheel buttons to reset the oil light on the dashboard.
  • For Chevys and GMCs without a VIC, press the gas pedal down 3 times to reset the light. For Fords, hold both the gas and brake pedals down.
  • For Hondas and Toyotas without a VIC, press and hold the “Trip” button on the dashboard.
Method 1
Method 1 of 7:

Chevy and GMC with a VIC

PDF download Download Article
  1. Turn your keys in the ignition twice, or press the “Start/Stop” button twice, so the power and dashboard lights come on. When your car is in this position, its engine is completely off. [1]
    • This method works for most Chevys and GMCs built after 2006 that also have a VIC.
  2. Find your car’s “Vehicle Info” buttons on the center console. This is where your radio display screen and temperature dials are located. Simply press the “Menu” button until your dashboard reads “Remaining Oil Life.” [2]
    • Your car’s button titles and dashboard dialogue might be slightly different.
    Advertisement
  3. When you push the “Set/Clr” button on the center console, the dashboard should display a message asking you if you want to reset the oil life. Just use the arrow keys to select “Yes.” Your oil life should be set back to 100%! [3]
    4. Advertisement
Method 2
Method 2 of 7:

Honda with a VIC

PDF download Download Article
  1. Whether you’re turning the key in the ignition or pressing the “Start/Stop button,” make sure that only your car’s power is turned on. To do this, turn your ignition to “Run” or “II.” [4]
    • This reset method generally works for Hondas built after 2007.
  2. With this method, you simply have to use your car’s display to reset your oil. Just select “Home” on your center console and find the “Settings” option. Press “Vehicle” and scroll down to “Maintenance Info.” [5]
  3. Finishing up the reset process is just as easy. Press “Reset Items” and scroll until you see “Engine Oil.” Simply click “Reset” and your car will update your oil life to 100%. [6]
    • For models like the Accord, use the buttons on the wheel to navigate a similar process. Press “Home” on the wheel and scroll until you see “Maintenance” on the dashboard. Press the scroll button to see “Oil Life.” Then, press the button again and scroll to “Item A Only.” Press the button and your car is reset back to 100%. [7]
    4. Advertisement
Method 3
Method 3 of 7:

Ford, Jeep, and Dodge with a VIC

PDF download Download Article
  1. Turn your car on so its running power, but make sure the engine doesn’t start. This is usually when you turn the key in the ignition twice, or press the “Start/Stop” button twice with your feet off the brake. [8]
    • This reset method typically works for Fords built in 2014 and after, Jeeps made in 2018 and after, and Dodges built in 2015 and after.
  2. On your wheel are arrows and an “OK” button. Use the arrows to scroll and find “Settings” on your dashboard. Then, select “Vehicle.” [9]
    • For Jeep and Dodge vehicles, simply scroll down to “Vehicle Info.”
  3. Use the arrow buttons to find the “Oil Life” tab on the dashboard. Then, simply push and hold the “OK” button. After a second, your car should change your oil life back to 100% and reset the warning light. [10]
    • For Dodge vehicles, press and hold the right arrow button.
    4. Advertisement
Method 4
Method 4 of 7:

Chevy, GMC, Dodge, and Jeep

PDF download Download Article
  1. Put your key in the ignition and turn it twice. This starts your car so the electricity is on, but the engine is not running. You should see the lights on your dashboard light up and your car radio turn on. [11]
    • This method generally works for Chevy and GMC cars made between 1999 to 2006, Chevy 2500s built between 2006 and 2013, Dodge’s from 2008 to 2019, and Jeeps’ built between 2007 to 2017.
    • For cars with a “Start/Stop” button, keep your foot off the brake pedal and press the button twice.
  2. To reset your oil light, simply pump your gas pedal down to the floor 3 times, pausing briefly between each pump. Depending on your car’s model and year, you might see a message on your dash telling you the light is reset. [12]
    • For Dodge and Jeep vehicles, make sure to pump the gas pedal within 10 seconds of starting the car. [13]
  3. To make sure your oil light is fully reset, turn your keys all the way over to start your car. After a few seconds, your reset oil light should turn off. [14]
    4. Advertisement
Method 5
Method 5 of 7:

Honda

PDF download Download Article
  1. Put your keys into the ignition and turn them over twice so your car’s power starts. If you have a “Start/Stop” button, just press it twice while leaving your foot off the brake. Do not turn your car keys all the way over to turn the engine on. [15]
    • This method works for most Honda models that don’t have a VIC.
  2. Find the long “Trip” button emerging from the dashboard; depending on your car, it might be towards the left or right. Press the button until the message on your dashboard reads “Oil Life.” [16]
  3. To get the reset process initiated, simply press down on the “Trip” knob and hold. Keep holding the button until the “Oil Life” message starts flashing. [17]
  4. When the “Oil Life” message starts blinking, take your finger off the button. Then, quickly press it down again. Hold it until the “Oil Life” message stops blinking and reads “100%.” [18]
    5. Advertisement
Method 6
Method 6 of 7:

Ford

PDF download Download Article
  1. When you reset your oil light, your car’s power needs to be on. Turn your key in the ignition twice, or press on the “Start/Stop” button twice without your foot on the brake. In this mode, your engine is not running. [19]
    • This method generally works for Fords made in 2011 and after without a VIC.
  2. Push the gas pedal all the way down to the floor, then press the brake pedal down. After several seconds, a message on your dashboard should pop up and read “Service: Oil Reset in Progress.” [20]
  3. Keep your feet pressing down on both pedals. After about 20 seconds, the progress message should disappear and be replaced with “Service: Oil Reset Complete.” Take your feet off the pedals and the oil light should disappear, too! [21]
    • For models like the Explorer, you might use the trip reset button instead. Hold the button down until you see a “System Recheck” message. Press the button until you reach “Oil Life.” Push and hold the button until you’ve changed the percentage to 100. Press the button again, hold it, and cycle back to “Oil Life.” Hold the button until you see “Oil Change Required” then hold again when you see “Hold Reset.” After you hold, the reset should stick! [22]
    4. Advertisement
Method 7
Method 7 of 7:

Toyota

PDF download Download Article
  1. Whether you have a set of keys or a “Start/Stop button,” switch your car on so the power’s running but the engine isn’t. Then, find your “Trip” or “Odometer” button on the dashboard. Press it until your dashboard reads “Trip A.” [23]
    • This method works for most Toyotas built after 2006.
    • Camrys made between 2002 to 2006 might use the “ODO” dashboard setting instead of “Trip A.” Check your car’s manual to make sure you’re using the right setting. [24]
  2. Switch your car off. Then, press and hold the “Trip” button. Turn your ignition back on so only the car’s power is running. You should see a message that your car is resetting the maintenance data. [25]
  3. Once the “Resetting Maintenance Data” message leaves your dashboard, take your finger off the button. If you want to double check that your light turned off, just start your car! [26]
    • For models like the Tacoma, you might see 4 little stars in the bottom right corner of the dashboard. Just wait for them to disappear before taking your finger off the “Trip” button. [27]
    4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Fix Dashboard Lights That Won't Light
      How to
      Open a Headlight of a Car
      How to
      Fix Car Tail Lights
      How to
      Install Spotlights on Your Vehicle
      How to
      Replace a Headlight Adjustment Screw
      How to
      Install Fog Lights
      How to
      Reset the Maintenance Light on Your Toyota: All Models
      How to
      Change the Tag Lights in a Vehicle
      How to
      Dry Tail Lights
      How to
      Test Fuses with a Test Light
      Why Are My Brake Lights Not Working?
      How to
      Install LED Lights in Your Vehicle's Interior
      What the Wrench Warning Light Means
      How to
      Fix a Stuck Brake Light
      Advertisement

      References

      1. ↑ https://youtu.be/MkZKS2gDijs?t=7
      2. ↑ https://youtu.be/MkZKS2gDijs?t=11
      3. ↑ https://youtu.be/MkZKS2gDijs?t=25
      4. ↑ https://www.jdpower.com/cars/shopping-guides/how-do-you-reset-the-oil-light-on-a-honda-accord
      5. ↑ https://youtu.be/4WobYlw20vE?t=47
      6. ↑ https://youtu.be/4WobYlw20vE?t=73
      7. ↑ https://youtu.be/vaACnYTcWq4?t=36
      8. ↑ https://youtu.be/Kbu34DA00rw?t=18
      9. ↑ https://youtu.be/gTz7PKwxRoQ?t=18
      1. ↑ https://youtu.be/Kbu34DA00rw?t=43
      2. ↑ https://youtu.be/JpDhcNUJfNs?t=42
      3. ↑ https://youtu.be/VrkO5vuc7H4?t=105
      4. ↑ https://youtu.be/oliq-sNfBks?t=30
      5. ↑ https://youtu.be/VrkO5vuc7H4?t=111
      6. ↑ https://youtu.be/lfaf5wTWHNw?t=50
      7. ↑ https://youtu.be/Os5W3brrb5A?t=10
      8. ↑ https://youtu.be/Os5W3brrb5A?t=25
      9. ↑ https://youtu.be/lfaf5wTWHNw?t=100
      10. ↑ https://youtu.be/3rxYxA4nKtk?t=8
      11. ↑ https://youtu.be/3rxYxA4nKtk?t=43
      12. ↑ https://youtu.be/3rxYxA4nKtk?t=60
      13. ↑ https://youtu.be/nIT2lCggAPw?t=9
      14. ↑ https://youtu.be/5zFp29T2QvE?t=69
      15. ↑ https://youtu.be/NGCQfwR3nVc?t=50
      16. ↑ https://youtu.be/5zFp29T2QvE?t=81
      17. ↑ https://youtu.be/5zFp29T2QvE?t=121
      18. ↑ https://youtu.be/XQTs1W6e_f4?t=57

      About This Article

      Thanks to all authors for creating a page that has been read 66,367 times.

      Did this article help you?

      Advertisement