PDF download Download Article
How to try a potential quick fix for “reduced engine power” mode, and guidance on handling the issue if the quick fix doesn’t work
PDF download Download Article

It’s hard to ignore the “reduced engine power” warning on your dashboard—because when it lights up, you’ll also feel a clear reduction in your vehicle’s acceleration and performance. If the cause is just a signal error, restarting your vehicle may solve the problem. Otherwise, it’s important to figure out the underlying issue and get it fixed ASAP. Keep reading for helpful info on what reduced engine power is, what can cause it, and how to deal with it.

Things You Should Know

  • Shut off the engine, wait 10 seconds, then restart the vehicle to see if this resets the reduced engine power light—but this will only work if it’s a signal error.
  • Avoid driving your vehicle when the reduced engine power light is on—instead, identify and repair the underlying problem that’s causing the warning light.
  • Have a professional mechanic diagnose and repair the problem—only attempt repairs yourself if you’re fully confident in your auto repair skills and knowledge.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
Section 1 of 5:

Quick Fix

PDF download Download Article
  1. Modern vehicles are basically computers with wheels, so try the same technique you use for your phone or laptop—reboot it and hope that works! If the problem is a signal error and not an actual fault in the system, shutting off the vehicle for 10 seconds and restarting it may clear the issue. [1]
    • If the light doesn’t come back on and your vehicle drives as normal, everything is probably fine. But it’s a good idea to get your vehicle checked out by a mechanic sooner rather than later.
  2. If the reduced engine power light returns immediately or shortly after you restart the vehicle, it’s not just a signal error—instead, you have a genuine issue that needs immediate attention. And this is rarely a DIY-friendly issue for the average vehicle owner. Your best bet is to have the vehicle checked and repaired by a trained professional. [2]
    • Don’t bother trying to restart the vehicle again if the light comes back on after the first try. That’s your sign that there’s a bigger problem at hand.
  3. Advertisement
Section 2 of 5:

Can you drive with reduced engine power?

PDF download Download Article
  1. Your vehicle will only operate at low speed and with minimal performance in reduced engine power mode, which makes attempting to drive dangerous in and of itself. Additionally, driving the vehicle risks causing extensive (and expensive) damage to the engine and/or electrical system—reduced engine power mode is definitely not complete protection against this. [3]
    • If you’re at home or parked in a safe place when this problem arises, call to have your vehicle towed to a garage. Don’t try to drive it there yourself.
    • Drive only as far as you must to get to a safe location—driving to a nearby parking lot instead of stopping on the side of a busy road, for example. Then get a tow.
Section 3 of 5:

What is reduced engine power?

PDF download Download Article
  1. The reduced engine power light comes on when your vehicle’s computer system senses an error or problem that could lead to significant engine damage. The system attempts to protect the engine by going into a low power mode. In addition to the dashboard light—usually a text warning like “low engine power” or the “check engine” symbol with an down-pointing arrow beneath it—you’ll notice impacts like the following: [4]
    • Your vehicle may throttle down significantly, making it impossible for you to drive at anything beyond a very slow speed. (This is why you’ll hear this referred to as “limp mode.”)
    • Instead of just slowing down, your engine may in fact shut down completely. If you’re on the road when this happens, you have no choice but to coast to the side of the road and turn off the vehicle.
    • Non-essential electrical systems in your vehicle, like the audio system, interior lights, and so on, will almost certainly shut down as a power-saving measure.
  2. Advertisement
Section 4 of 5:

What causes reduced engine power?

PDF download Download Article
  1. This isn’t a very satisfying answer, but it’s the honest one! Some causes are more common than others, especially with particular vehicle makes/models, but the list of possibilities is practically endless. Here are some of the most common causes:
    • Problems with the throttle actuator control (TAC) system, including bad circuitry, faulty sensors, or mechanical issues. [5]
    • Failures in the clutch system, faulty oxygen sensors, or loose engine cables, wires, or hoses. [6]
    • Damage to the accelerator pedal, which contains sensors. [7]
Section 5 of 5:

Diagnosing the Problem

PDF download Download Article
  1. Something as basic (but vital) as a frayed wire or a loose belt can cause a reduced engine power signal. If you have moderate or greater vehicle repair skills, go ahead and check all the wires, cables, hoses, belts, and other connectors for damage or disconnections. If you’re a typical DIYer, however, play it safe and have a professional mechanic do the diagnosis and any repairs. [8]
    • Check the fuses at the fuse panel as well. With your owner’s manual as your guide, identifying and replacing a bad fuse is manageable for the average DIYer.
  2. Buy or borrow an OBD-II reader , connect it to the designated port (according to your owner’s manual), and use the reader (according to its instructions) to get a diagnostic code from your vehicle’s computer. Search the internet for the given diagnostic code to learn about the problem.
    • If the reader displays code P2135, for example, search online for “DTC P2135” or head to a website that offers a searchable list of DTCs (diagnostic trouble codes) for OBD-II readers.
      • Code P2135 refers to mismatched readings between two throttle position sensors, which is one of the more common triggers for a reduced engine power light.
    • Even if you have no intention of attempting the repair yourself, using a OBD-II reader is an easy way to figure out the likely problem before taking your car to a repair garage.
  3. Be honest with yourself about your vehicle repair capabilities here! It’s easy to cause even more damage, leading to an even larger repair bill, if you’re not sure what you’re doing under the hood.
    • For example, if you do get code P2135, the repair may be a 30+ step process that’s beyond the capabilities of all but truly seasoned DIYers. [9]
  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about engine lights, check out our in-depth interview with Duston Maynes .

      About This Article

      Thanks to all authors for creating a page that has been read 135,428 times.

      Reader Success Stories

      • Anonymous

        May 4

        "Helped me successfully reset my reduced engine power sensor!"
      Share your story

      Did this article help you?

      Advertisement