How to Restore Black Plastic

PDF download Download Article
PDF download Download Article

Although durable, black plastics (especially car trims and bumpers) are prone to fading and discoloration over time. Luckily, bringing out the plastic's natural luster is easily done. By rubbing olive oil or using a heat gun on the faded area, you can help your plastic look as good as new. And, if all else fails, you can always use black spray paint to give your plastic a sleek shine again.

Method 1
Method 1 of 3:

Rubbing Oil on Faded Plastic

PDF download Download Article
  1. The olive oil will absorb best into a clean surface. If your plastic object is dirty, wash it with soap and warm water. Dry it off with a towel before restoring it to prevent the olive oil from slipping off.
  2. Olive oil can restore black plastic's natural color, clearing up any faded or discolored areas. Add a small, coin-sized dab of olive oil to a washcloth or paper towel—a little goes a long way, and you can always add more later as needed. [1]
    • Baby oil or linseed oil can also work as an alternative. [2]
    Advertisement
  3. Rub the washcloth or paper towel back and forth on the targeted area. Continue rubbing the area for several minutes to help the plastic absorb the olive oil. [3]
    • To avoid getting olive oil on nearby objects, cover them with a tarp or towel.
  4. After rubbing the olive oil for a few minutes, take a dry washcloth and wipe the plastic in circular motions. Apply heavy pressure as you do so to get rid of the olive oil grease and give the plastic an extra shine. [4]
    • If you can't find another cloth, use the part of the first paper towel or wash cloth that isn't oily.
  5. When you've removed the olive oil, check the plastic object's color for any remaining damage. If you notice any patches that the olive oil didn't restore, try the process again with more oil while directly targeting the stubborn area. [5]
    • For severe fading or discoloration, you may need to spray paint the plastic black.
  6. Like olive oil, black plastic moisturizers restore car trims and bumpers by adding moisture to their surface. If you would prefer to use a product made specifically for cars, you can apply most black plastic moisturizers in a similar way that you would olive oil. [6]
    • You can buy car trim moisturizers at most automotive stores. Read its specific instructions carefully before applying the object.
    • If you are trying to restore black plastic that isn't part of your car, you can still try a moisturizer on your object.
    Ursus Wehrli, Professional Organizer and Cleaning Expert

    Black plastic often fades in the sunlight, losing its rich darkness to a frosted gray. While you may be tempted to discard these faded items, don’t underestimate the transforming power of a good detail clean. Arm yourself with UV-resistant trim shine, detailing brushes, and microfiber cloths to gently restore faded black plastic to a like-new condition—no heavy duty chemicals required.

    7. Advertisement
Method 2
Method 2 of 3:

Trying a Heat Gun

PDF download Download Article
  1. Heat guns can bring out the natural oils in black plastic and restore its luster, but this is not a long-lasting solution. The plastic may eventually fade with use and, after several treatments, will no longer have enough natural oils to draw out through heating. [7]
    • How long this restoration method lasts depends on how often your car is exposed to direct sunlight. The more often you use you car, the quicker the restoration will fade.
    • If you've used a heat gun in the past but the treatment no longer works, try adding olive oil to the plastic's surface to restore its shine.
    • You can buy or rent a heat gun online or from some hardware stores.
  2. Heat guns can warp or discolor the surfaces of non-plastic items. If your object is attached to something, cover any areas you do not want to heat with a flame-resistant tarp.
    • This method is primarily for car trims and bumpers. Do not use this method on black plastic attached to flammable materials (like some plastic toys).
  3. Using a heat gun on dirty plastic can burn in any dirt or stains. Wash the object with soap and water, cleaning away as much debris as possible, and dry it off with a towel before applying heat. [8]
  4. Turn on the heat gun and move it in small circles around the discolored plastic. Avoid leaving the heat gun in one place for too long to keep the color treatment even and avoid burning the plastic. [9]
    • Test the heat gun on an inconspicuous area first to make sure you like the treated plastic's color.
  5. As you move the heat gun around the plastic, it should change to a darker, richer color. When you've covered the entire surface, turn the heat gun off and check the plastic. If you're happy with the new color, you have finished restoring the object.
    • If your plastic still looks faded or discolored, try applying olive oil or painting the object instead.
    6. Advertisement
Method 3
Method 3 of 3:

Painting Over Black Plastic

PDF download Download Article
  1. The paint will stick best to a smooth, dirt-free surface. Dip a washcloth in soap and warm water and clean any dust or debris from the plastic's surface.
    • For a thorough cleaning or to remove stubborn dirt, immerse the object in water instead. [10]
    • Dry the object off with a cloth before painting it.
  2. Sanding provides texture to help the paint stick. Rub the fine-grit sanding block with firm pressure over the plastic's surface. When you're finished sanding, wipe away any dust with a dry brush. [11]
    • If you don't have a dry brush, a paint brush works as an alternative.
  3. Spray a coat of paint primer over the object's surface. Avoid spraying one area for too long to keep the coat even and light. Let the primer dry for the time recommended on the packaging, which should be between 30 minutes to an hour. [12]
    • You can buy plastic primer online or from most craft stores.
    • Thin primer coats are ideal because heavy or multiple coats can change the object's texture.
  4. Hold the nozzle about 12–18 inches (30–46 cm) away from the surface and move the can in smooth strokes over the object. Continue spraying the paint in overlapping strokes until you cover the entire surface. [13]
    • Apply 3-4 coats to strengthen the paint's color, waiting for it to dry in-between coats.
    • Each coat should take about 30-60 minutes to dry—check the paint's packaging for a specific time.
  5. After the last paint coat dries, spray the entire surface with a clear paint primer. This will prevent the paint from fading, discoloring, or chipping over time. [14]
    • Paint primer is especially important if you will use your object outside, where it will be subject to the elements.
    6. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If you're working with broken or damaged plastic, repair it with glue, acetone, or a soldering iron before restoring its color.
        Thanks
        Helpful 1 Not Helpful 0
      • Take your black plastic to a recycling center if you cannot restore its color to an extent that you need.
        Thanks
        Helpful 0 Not Helpful 2
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Rubbing Oil on Faded Plastic

      • Wash cloth or paper towel
      • Olive oil

      Trying a Heat Gun

      • Heat gun
      • Flame-resistant tarp
      • Water
      • Soap
      • Towel

      Painting Over Black Plastic

      • Soap
      • Water
      • Wash cloth
      • 220-grit sandpaper
      • Plastic primer
      • Black spray paint
      • Clear spray primer

      You Might Also Like

      How to
      Make Bioplastic
      How to
      Repair Cracks in Plastic
      How to
      Melt Plastic
      How to
      Cut Thick Plastic
      How to
      Mold Plastic
      How to
      Glue Plastic
      How to
      Cut Polycarbonate
      How to
      Adhere Plastic to Wood
      How to
      Restore Sun Damaged Plastic
      How to
      Fix a Crack in a Water Bottle
      5 Easy Ways to Cut Plastic
      A Complete Guide to Reinforcing Plastic
      How to
      Make Plastic
      How to
      Repair Polypropylene
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=vkgBapTdg2s&feature=youtu.be&t=62
      2. ↑ https://www.carthrottle.com/post/4-ways-to-restore-faded-black-plastic-trim/
      3. ↑ https://www.youtube.com/watch?v=vkgBapTdg2s&feature=youtu.be&t=73
      4. ↑ https://www.youtube.com/watch?v=vkgBapTdg2s&feature=youtu.be&t=97
      5. ↑ https://www.youtube.com/watch?v=vkgBapTdg2s&feature=youtu.be&t=115
      6. ↑ https://www.carthrottle.com/post/4-ways-to-restore-faded-black-plastic-trim/
      7. ↑ https://www.carthrottle.com/post/4-ways-to-restore-faded-black-plastic-trim/
      8. ↑ https://www.youtube.com/watch?v=PQs2ik1dzzE&feature=youtu.be&t=68
      9. ↑ https://www.youtube.com/watch?v=PQs2ik1dzzE&feature=youtu.be&t=77
      1. ↑ https://www.carthrottle.com/post/4-ways-to-restore-faded-black-plastic-trim/
      2. ↑ https://www.familyhandyman.com/list/12-tips-for-perfect-spray-paint/
      3. ↑ https://www.thecreativityexchange.com/2012/03/how-to-spray-paint-plastic-plastic-crate-revamp.html
      4. ↑ https://www.familyhandyman.com/list/12-tips-for-perfect-spray-paint/
      5. ↑ https://www.familyhandyman.com/list/12-tips-for-perfect-spray-paint/

      About This Article

      Article Summary X

      To restore black plastic, start by washing and drying it if it’s dirty, which will help it absorb the oil that will restore its natural color. Once it’s dry, rub a coin-sized amount of olive oil into the plastic using a washcloth or paper towel. After rubbing the plastic for a few minutes, buff it with a dry cloth to remove any leftover oil. If this doesn’t restore your black plastic, spray it with black paint to give it a new coat. Make sure you use a primer first to help the paint stick. When the paint’s dry, spray on a coat of clear primer to protect your new paint from fading and chipping. For more tips, including how to temporarily restore black plastic using a heat gun, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 278,720 times.

      Reader Success Stories

      • Graham Harding

        Nov 11, 2019

        "Olive oil worked a treat on my faded plastic bumpers. Looks great, just hoping it lasts a good while now."
      Share your story

      Did this article help you?

      Advertisement