How to Reupholster a Dining Room Chair

PDF download Download Article
A simple DIY for covering your chair seats
PDF download Download Article

A simple way to improve the look of any chair with a removable seat is by covering the chair seat with brand new fabric. Whether you’re looking to swap out stained or ribbed fabric or make your seat more comfortable, all you need is some fabric, foam, and batting to turn an outdated piece of furniture into a trendy item. Reupholstery is a low-cost, beginner-friendly DIY project that can be completed in under an hour with a staple gun and this easy-to-follow guide!

Reupholstering a Chair

  1. Unscrew the seat from the base of the chair.
  2. Pull out any tacks or staples and remove the original fabric.
  3. Replace the foam and batting to make the seat more comfortable, if desired.
  4. Drape stain-resistant or waterproof upholstery fabric over the chair base.
  5. Use a staple gun to secure the new fabric to the bottom of the base.
  6. Start stapling at the center of one side and work your way around the seat.
Part 1
Part 1 of 3:

Removing the Old Chair Covers

PDF download Download Article
  1. Use a screwdriver to loosen the screws attaching the dining chair seat to the chair base. Turn the screwdriver to the left to loosen the screws. Make sure to save the screws for reattaching the seat to the base after you’re done. [1]
  2. Use the back of a hammer or a re-upholstery multi-tool to remove the tacks that hold the fabric onto the seat. Work the end of the tool under the tack or staple and then pull it up. [2]
    • Discard the tacks or staples since you will be using a staple gun to attach the new materials.
    Advertisement
  3. After you have removed all of the tacks or staples, lift the fabric off of the seat. If you plan to replace the seat’s padding, then lift this off the seat as well. [3]
    • For older chairs, the padding may be made up of a mixture of hay and cloth, so replace this with foam.
  4. Make sure that the seat base is sturdy. If it appears damaged or weak, then you may want to replace it. Purchase a replacement seat base or cut a piece of plywood to the dimensions of your seat base and attach the new foam and upholstery to it using a staple gun. [4]
    • An easy way to get the dimensions you need is to place the old seat on the plywood and trace around the edges of the old seat with a marker or pen. Then, use a hand saw to cut along the lines you traced.
    5. Advertisement
Part 2
Part 2 of 3:

Replacing the Dust Cover and Padding

PDF download Download Article
  1. Place the dust cover fabric over the seat base and cut around the edges of the set to get the exact dimensions. This piece will be hidden under the foam and fabric, so don’t worry if the edges are a little jagged. [5]
    • A dust cover will help to prevent the cushion from sagging down into the seat base.
  2. Place the dust cover onto the seat base and staple around the edges to secure it. Make sure that the fabric is taut. You may want to place 1 staple at the center of each side to start and then work outwards on each side, pulling the fabric as you go. [6]
  3. [7] Place the seat frame directly onto the foam. Trace around it using a pen or marker. Then, use a serrated knife or an electric knife to cut out the foam using the lines you traced onto it as guides. [8]
    • A bread knife or turkey carving electric knife work well for cutting foam padding. [9]
  4. After you have the foam cut out, place it onto the seat frame so that the edges of the foam and seat are lined up. Place the foam directly on the batting and the seat frame on top of the foam so that the bottom of the seat is facing up. Make sure that the foam and seat are centered on the batting. [10]
    • Don’t worry about the dimensions of the batting. Use a large piece and cut what you need after you have the seat and foam in position.
    • Batting is an insulating layer that adds warmth and thickness to your chair seat. [11]
  5. Mark the batting with a permanent marker or fabric pen to indicate where to cut, or cut it directly while it’s wrapped over the edges of the seat. The edges of the batting need to go up and over the edges of the back of the seat by 2 inches (5.1 cm) on all sides. [12]
  6. Staple the center of each edge of the batting first on the back of the seat, and then continue stapling along the edges on each side. Pull the padding taut along each edge as you staple it. Then, do the same thing for each of the other sides. [13]
  7. Gather the excess fabric at 1 corner of the seat, and then fold it over at the corner. Staple in the center of the fold to secure the fabric at the corner of the seat. If there is still some extra fabric, fold it again and place another staple over the fold to secure it. [14]
    • Repeat this for each corner of the chair.
  8. Once the batting is secured to the seat, cut the excess to reduce the bulk and prevent any hanging fabric. Cut about 1 inch (2.5 cm) from the staples all around the inside of the seat. [15]
    • Don’t cut the batting too close to the staples or it may come loose.
    9. Advertisement
Part 3
Part 3 of 3:

Cutting and Attaching the New Upholstery

PDF download Download Article
  1. Situate the seat so the batting and cushion are right up against the fabric, with the bottom of the seat facing up. Try to place the seat so that it is about 3 to 4 inches (7.6 to 10.2 cm) from the edges of the fabric, but don’t worry about getting it perfect. You can adjust it before you start cutting. [16]
    • You may want to opt for a dark fabric to make stains less visible, or get a water-resistant fabric to protect your chair from spills. [17]
  2. You will need this much fabric all the way around the cushion to cover it. Measure or find where to cut by wrapping the edges of the fabric up and over the seat edges. Then, mark the fabric and cut it. [18]
  3. Grasp the fabric on 1 side of the seat and pull it up and over the edge of the seat. Locate the center of the seat edge, and place a staple in the center of the edge to secure the fabric. [19]
    • Repeat this for the other 3 sides of the seat.
    • If the seat is round, then staple the upholstery to the underside of the seat in 4 equal locations, such as at 12 o’clock, 3 o’clock, 6 o’clock, and 9 o’clock.
  4. Choose 1 side of the seat to work on first. Grasp the fabric on the inside of the seat next to where you placed the first staple. Then, start stapling along the edge going out towards the corner of the seat, and then do the other side of the staple. However, do not staple the fabric at the corners of the seat yet. [20]
    • Repeat this on all sides of the seat.
  5. Once the fabric is secured along the sides, choose a corner and fold the fabric over at the corner to gather it. Then, fold the fabric again, and staple the fabric a couple of times at the center of the fold to hold it in place. [21]
    • Repeat this for all of the corners.
  6. Once the fabric is secured at the corners, cut the fabric on the inside of the chair back 1 inch (2.5 cm) from the staples. This will prevent the excess fabric from hanging down. [22]
    • Be careful not to cut the fabric too close to the staples or it may come loose.
  7. To finish the seat, cut a piece of dust cover fabric to the same dimensions as the seat. You can place the fabric over the back of the seat and cut along the edges. [23]
    • Be careful not to cut the upholstery fabric as you cut out the dust cover fabric.
  8. Staple the center of 1 side of the fabric first and then work out towards the edge. [24]
    • Repeat this all the way around the edges of the chair to secure the dust cover.
  9. Once you have finished securing the fabric, your reupholstered dining chair is complete! Use the screws that you saved to reattach the chair to its base. [25]
    • If you have other chairs to reupholster, repeat the process for each of these chairs.
    10. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can I reupholster a chair myself?
    Katherine Tlapa
    Interior Designer
    Katherine Tlapa is an interior designer, currently working as a Design Specialist for Modsy, a design service based in San Francisco. She also runs her own DIY Home Design blog, My Eclectic Grace. She received her BFA in Interior Architecture from Ohio University in 2016.
    Katherine Tlapa
    Interior Designer
    Expert Answer
    Sure, you can do it yourself. First you'll first need to disassemble the cushion or the upholstered parts. Some dining chairs have seats that can be screwed right off and some are attached. If the padding is in good condition, you can cover the seat easily with new fabric. Either upholstery glue or staples are a simple way to attach the fabric where it is concealed. If you cannot dislodge the upholstered area of the chair, you'll need to neatly tuck the fabric around the edges and do something that will conceal the seams, such as roping or fabric beading.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 5
  • Question
    How do I reupholster a dining chair that also needs new padding on the seat?
    Community Answer
    Buy foam padding from the same store where you buy the fabric. It's expensive, so check around for deals or coupons.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 28
  • Question
    The staples of my manual staple gun will not completely penetrate the composite material. What should I do?
    Community Answer
    Once the staples are started by the staple gun, you can often tap them flat with a small hammer. Alternatively, furniture tacks may be necessary; they are stronger and provide a higher quality appearance.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 19
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Check the orientation of the pattern on the upholstery before you start cutting or stapling to make sure it's positioned properly.
        Thanks
        Helpful 1 Not Helpful 0

      Tips from our Readers

      The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
      • For any fabrics with patterns, start stapling from the front to make it easier to stretch and staple the sides. This way, any wrinkles or bunching can be corrected.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Video

      Things You’ll Need

      • Hammer or re-upholstery multi-tool
      • Plywood (optional)
      • Replacement seat base (optional)
      • Saw (optional)
      • Pen or marker
      • Screwdriver
      • Dust cover fabric (about 0.5 yards (0.46 m) per chair)
      • Scissors
      • 2 in (5.1 cm) thick high-density foam padding (about 0.5 yards (0.46 m) per chair)
      • Serrated knife or electric knife
      • Batting (about 0.5 yards (0.46 m) per chair)
      • Re-upholstery fabric (about 0.5 yards (0.46 m) per chair)
      • Screws
      • Staple gun


      You Might Also Like

      How to
      Fix Sagging Sofa Cushions
      How to
      Clean Upholstery with a Steam Cleaner
      How to
      Repair a Faux Leather Sofa
      How to
      Remove Wax from Upholstery
      How to
      Weave Rope Seats
      How to
      Reupholster Furniture
      How to
      Upholster a Bench
      How to
      Make Upholstery Piping
      How to
      Repair a Leather Chair
      How to
      Reupholster a Footstool
      How to
      Fill a Bean Bag Chair
      How to
      Shrink Vinyl Upholstery
      Advertisement

      References

      1. ↑ https://www.familyhandyman.com/project/how-to-reupholster-a-chair/
      2. ↑ https://www.familyhandyman.com/project/how-to-reupholster-a-chair/
      3. ↑ https://www.familyhandyman.com/project/how-to-reupholster-a-chair/
      4. ↑ https://www.bhg.com/decorating/makeovers/furniture/how-to-reupholster-dining-room-chairs/
      5. ↑ https://www.familyhandyman.com/project/how-to-reupholster-a-chair/
      6. ↑ https://youtu.be/MmQpQmhXbMo?t=2m11s
      7. ↑ https://www.thinkingcloset.com/2016/02/28/how-to-reupholster-a-chair-seat-the-no-mess-method/
      8. ↑ https://youtu.be/MmQpQmhXbMo?t=2m21s
      9. ↑ https://www.thinkingcloset.com/2016/02/28/how-to-reupholster-a-chair-seat-the-no-mess-method/
      1. ↑ https://youtu.be/MmQpQmhXbMo?t=2m38s
      2. ↑ https://thequiltshow.com/quiltipedia/what-is-batting
      3. ↑ https://youtu.be/MmQpQmhXbMo?t=2m45s
      4. ↑ https://youtu.be/MmQpQmhXbMo?t=2m57s
      5. ↑ https://www.youtube.com/watch?v=45hB6ydGWNI&t=9s
      6. ↑ https://youtu.be/MmQpQmhXbMo?t=3m39s
      7. ↑ https://youtu.be/MmQpQmhXbMo?t=3m57s
      8. ↑ https://www.thinkingcloset.com/2016/02/28/how-to-reupholster-a-chair-seat-the-no-mess-method/
      9. ↑ https://youtu.be/MmQpQmhXbMo?t=4m3s
      10. ↑ https://youtu.be/MmQpQmhXbMo?t=4m11s
      11. ↑ https://youtu.be/MmQpQmhXbMo?t=4m20s
      12. ↑ https://youtu.be/MmQpQmhXbMo?t=4m47s
      13. ↑ https://youtu.be/MmQpQmhXbMo?t=5m7s
      14. ↑ https://youtu.be/MmQpQmhXbMo?t=5m18s
      15. ↑ https://youtu.be/MmQpQmhXbMo?t=5m28s
      16. ↑ https://youtu.be/MmQpQmhXbMo?t=5m43s

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 1,457,994 times.

      Reader Success Stories

      • Elaine Thurston

        Apr 2, 2018

        "I followed most of the instructions, which were most helpful. However, I replaced the old with new fabric and high ..." more
        Rated this article:
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement