How to Fix the LC Error Code on Your Samsung Dishwasher

PDF download Download Article
Troubleshooting tips whether you've got a visible leak or not
PDF download Download Article

If you notice “LC” appearing on your Samsung dishwasher screen and hear the drain running, then the sensors in the machine are detecting moisture. While the code usually signals a water leak, there are a few other causes that could trigger it. Luckily, you can fix most LC errors on your own with a couple of tools. Keep reading to learn more about the LC code, what causes it, and how to fix it. We also spoke with appliance repair experts for additional cleaning and troubleshooting advice to help you out.

Samsung Dishwasher LC Error Code Troubleshooting

An LC or LE code usually means your dishwasher senses a leak or water near the moisture sensor. Inspect and repair any leaks you find on your dishwasher. If you have an LC code but no leak, then unplug it from power to reset it, wait for the moisture to dry, or contact a repairperson.

Section 1 of 5:

What does the LC error code mean?

PDF download Download Article
  1. Your dishwasher has a moisture sensor under the tub to check for water leaks. When the sensor detects moisture, it will show the LC or LE code on the display. Even if there is no leak, your dishwasher will turn on so it can try draining the residual water. [1]
    • Your dishwasher will stay on and continue trying to drain until it doesn’t sense any more moisture.
    • If you have a Waterwall Samsung dishwasher, then the LC or LE code means that the water reflector that moves back and forth at the bottom of the tub is blocked.
    2. Advertisement
Section 2 of 5:

Clearing the LC Code With Visible Leaks

PDF download Download Article
  1. Tighten or replace loose connections in the supply hoses . Your dishwasher has multiple hose connections that could all leak if they’re loose or damaged. Open the cabinets next to your dishwasher and check the hose running from your dishwasher to your water supply. [2]
    • If the hose connection feels loose, tighten a hose clamp around the connection to seal it.
    • If you notice any damage at the end or along the length of the hose, then completely replace it. Turn off your water supply , disconnect the hose, and replace it with a new one.
    • Some hoses connect to the back of your dishwasher, and they’re a little trickier to access. Unscrew the screws along the side, and have a friend help you slide the dishwasher out.
  2. Wipe or replace the door gasket if it’s dirty. The door gasket is the rubber seal around the edge of the dishwasher door, and damage or debris can cause water to leak out. Open your dishwasher and inspect the gasket. Wipe away any debris or residue with a damp cloth. If it looks cracked, torn, or damaged, then replace the gasket . [3]
    • Appliance repair expert Gevorg Grigorian says dishwashers “tend to leak from the left or right side of the door, or even simultaneously on both sides. That's usually a worn out gasket around the door.”
  3. Grigorian says that dishwasher filters can fill up with food residue or broken dishes, which could prevent water from draining and cause a leak error. To clean the filter , he says to remove the lower rack, twist the filter to pull it out, and then rinse it out in your sink.
    • Dishwasher filters are usually at the bottom of the tub near the front of the appliance.
    EXPERT TIP

    Gevorg Grigorian

    Appliance Repair Expert
    Gevorg Grigorian is an Appliance Repair Specialist and the Owner of G and R Appliance Repair in Los Angeles, California. With over 15 years of experience, Gevorg specializes in residential and commercial appliance repairs as well as heating, ventilation, and air conditioning (HVAC) services. Gevorg holds a BS in Business Administration and Management from California State University-Northridge.
    Gevorg Grigorian
    Appliance Repair Expert

    Check the filter drain for debris before reinstalling the filter. Shine a flashlight into the hole where the filter was, and just make sure there's no kind of obstructing object in there as well.

  4. Open your dishwasher and check if the sides of the tub are perfectly vertical. If you notice the walls bowing in, slightly loosen the screws securing the dishwasher to your cabinets until the walls aren’t distorted. [4]
    • Grigorian says over time, hot water can warp plastic tubs which could lead to leaks.
  5. Remove the toe kick panel at the bottom of your dishwasher to access the adjustment legs. Twist the screws or nuts on the legs to level out your dishwasher so it doesn’t wobble or tilt. Use a bubble level inside the tub to check that the sides of the dishwasher are level. [5]
    • If the back legs of the dishwasher are wobbly, then turn off the power and water supply to your dishwasher, and carefully slide the appliance out to access them.
    • Use your level to check that the front of the dishwasher is level with the back. If the front is lower, then it could cause leaks from the bottom of the door and trigger the LC code again.
  6. The spray arms rotate and spray water, but debris caught inside them can cause water to spray where it’s not supposed to. Open your dishwasher and unscrew the nuts holding the spray arms in place. Rinse the spray arms out with clean water, and use a toothpick to pry debris out from the nozzle holes. [6]
    7. Advertisement
Section 3 of 5:

Clearing the LC Code Without Visible Leaks

PDF download Download Article
  1. If you can’t find a leak, then the sensor may be malfunctioning. Each dishwasher model is different, so appliance repair specialist Homer Flores says to “locate the technical spec sheet located behind the toe kick plate” for specific manufacturer instructions. Once you reset your dishwasher, the error code will disappear.
    • Typically, all you have to do to reset your dishwasher is unplug it or turn it off at the breaker, wait about 5 minutes, and then plug it back in. Some models may have you press buttons on the appliance.
  2. If there isn’t a visible leak on your dishwasher, there’s a chance residual water is near the moisture sensor. Give your dishwasher some time to dry out completely and the code will go away on its own.
    • The dishwasher stays on and continues draining while the error code is active, which can get a little annoying after a while. Either unplug your dishwasher while it dries or get out of the house for a few hours to avoid the noise.
  3. If you’re unable to make the code go away and can’t figure out the cause, then use the Samsung Repair Services site to find a local support center. Explain your problem and what you’ve tried, and an experienced technician will come repair the problems for you.
    • Repair costs can vary depending on what parts need fixing and if your dishwasher is still covered under warranty.
    4. Advertisement
Section 4 of 5:

LC Error Code Causes

PDF download Download Article
  1. The primary function of the moisture sensor is detecting leaks underneath your dishwasher. If enough water leaks out to trigger the sensor, then the LC error code displays on your dishwasher screen and the appliance will try draining out the moisture to prevent damage. [7]
    • Dishwasher leaks are usually pretty noticeable from pooling water underneath the appliance, but leaks can also occur under your sink by the supply hose or along the drain hose.
  2. If there isn’t a visible leak, then water may have splashed onto the moisture sensor if you recently moved it. As long as the sensor detects water, the LC or LE error will stay active. [8]
    • Extreme temperatures or humidity can also make the moisture sensor detect water and trigger the error code.
  3. Using too much detergent in your dishwasher creates a lot of suds that could get near the moisture sensor. Because detergent takes longer to dry and evaporate than water, it can trigger an error and display the LC code. [9]
  4. If the moisture sensor is damaged or if there was recently a power outage, it may not work properly and could trigger an LC error when there’s no leak. If resetting your dishwasher doesn’t work, then it needs professional servicing.
  5. On some Waterwall models of Samsung dishwashers, the water reflector moves along the bottom of the tub to spray water. If there’s something preventing it from moving or if it’s improperly seated, then the error message will appear. [10]
    6. Advertisement
Section 5 of 5:

Other Samsung Dishwasher Error Codes

PDF download Download Article
  1. Normally, the display shows you information about the current cycle or lists the time. If something goes wrong, the code will appear and stay lit on your dishwasher until you resolve the issue. Common codes you may run into include: [11]
    • 1E or IE: The dishwasher filter is clogged
    • 3C: The dishwasher pump failed
    • 3E: The water temperature is too hot
    • 4C or 4E: The water supply pressure or temperature is too low
    • 5C, 5E. SC, or SE: The dishwasher has issues draining water
    • 7E: The reflector in Samsung Waterwall dishwashers is blocked
    • 9E: The water level in your dishwasher is too low
    • AP: The dishwasher is in Access Point mode to connect to a mobile device
    • bE or 6E: A button is stuck
    • CE: The control panel has a communication error
    • HC: The temperature is too high in your dishwasher
    • HE: The dishwasher is detecting temperature incorrectly
    • OC, 0C, or oE: The dishwasher has too much water
    • PC: The Zone Wash feature has a malfunction
    • PE: The Half load function is not working correctly
    • tE: The dishwasher is taking inaccurate temperature readings

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Use Dishwasher Salt
      3 Easy Ways to Reboot a KitchenAid Dishwasher
      How to
      Reset a Frigidaire Dishwasher
      How to
      Reset a GE Dishwasher
      How to
      Fix Your Bosch Dishwasher and Restart It
      How to
      Load a Dishwasher
      How to
      Fix a Dishwasher with Drainage Issues: Troubleshooting & Solutions
      How to
      Fit an Integrated Dishwasher Door
      How to
      Install a Built In Dishwasher
      How to
      Clean Fine China in a Dishwasher
      How to
      Install a Samsung Dishwasher
      Replacing a Dishwasher Water Inlet Valve
      How to
      Unclog a Dishwasher
      How to
      Use the Sanitize Setting on a Bosch SilencePlus 50 dBA Dishwasher
      Advertisement

      References

      1. ↑ https://www.samsung.com/us/support/troubleshooting/TSG01002074/
      2. ↑ https://youtu.be/Ak54TikIYMk?t=53
      3. ↑ https://youtu.be/nGKrpTBMAqw?t=21
      4. ↑ https://www.samsung.com/ae/support/home-appliances/what-to-do-when-the-dishwasher-shows-le-or-lc-error/
      5. ↑ https://youtu.be/2AIBKxoYe1M?t=12
      6. ↑ https://youtu.be/_-TRcRya-dA?t=132
      7. ↑ https://www.samsung.com/us/support/troubleshooting/TSG01002074/
      8. ↑ https://www.samsung.com/us/support/troubleshooting/TSG01002074/
      9. ↑ https://www.samsung.com/ca/support/home-appliances/meaning-of-error-codes-on-your-samsung-dishwasher/
      1. ↑ https://www.samsung.com/us/support/troubleshooting/TSG01002074/
      2. ↑ https://www.samsung.com/ca/support/home-appliances/meaning-of-error-codes-on-your-samsung-dishwasher/

      About This Article

      Thanks to all authors for creating a page that has been read 685 times.
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement