How to Sand a Car for Repainting

Co-authored by Charlie Payne and Hannah Madden

Last Updated: March 16, 2024 References

If your car’s paint job is looking a little tired or worn-in, you might be thinking about repainting your car on your own. Sanding your car is a super important first step—without it, your new paint job probably won’t look silky and smooth. Set aside an afternoon and spend a few hours sanding your car for a new paint job that looks like it was done by a professional.

Things You Should Know

If the old paint on your car is solid and uncracked, you don't need to sand before repainting. Just add a coat of primer before applying the new paint.
If you do need to sand your car, use a power sander .
Go over your car once with 180-grit sandpaper, then again with 300-grit sandpaper.
Finally, wet sand your car with 1200-2000 grit sandpaper for a smooth finish.

Question 1 of 6:

Can you paint over existing auto paint without sanding?

Download Article

Yes, if your existing paint is solid and uncracked. You can go ahead and use a primer coat to cover your existing paint before adding your new color. The new paint will go on shiny and smooth, and you don’t have to worry about sanding anything down. ^{[1]
X
Research source}
- This includes paint in the doorway and crevices of the car.
- Unfortunately, you can't paint over existing paint that is cracked without sanding first. If any part of your paint is cracked, you’ll have to sand it off before doing a primer coat. ^{[2]
  X
  Research source}

Question 2 of 6:

What’s the best method for sanding a car?

Download Article

1
Wear a mask, gloves, and goggles for safety. Sanding creates a lot of fine dust particles that can irritate your lungs, eyes, and skin. Before you start sanding, put on your protective equipment and keep it on until you’re finished.
- If you’re worried about getting particles in your car or your home, wear overalls over your clothes, then take them off and wash them.
2
Move your power sander in small, smooth and circular motions. Attach your sandpaper to the power sander and turn it on. Press it up against your car as hard as you can, and move it in small circles across the entire panel. ^{[3]
X
Research source}
- Do your best to make even motions and to avoid staying in a certain pattern too long, or you might end up staying in a rut.
3
Work one panel at a time for an even sanding. You can separate the car into different panels: the doors, the roof, the hood, the trunk, the bumper, and the fender. In total, each panel will probably take about 2 hours to sand down completely. ^{[4]
X
Research source}
- It might sound like a long time, but it’s totally worth it for a new, smooth paint job.
4
Wipe your car off with a damp cloth before priming and painting. Sanding generates a lot of dust, which can get stuck in automotive paint and primer. Before you move on, use a damp cloth to wipe down the outside of your car. ^{[5]
X
Research source}
- If you’re super worried about dust, use paint thinners to wipe down the outside of your car. Wait for the thinners to evaporate before you move onto priming.

Question 3 of 6:

What kind of sander should you use to sand a car?

Download Article

1
Use a power sander for the majority of your car. A power sander will be way easier to use than hand sanding your entire car. Use this tool on the large, flat surfaces of your vehicle, like the doors, roof, trunk, and hood. ^{[6]
X
Research source}
- You can buy a power sander from most hardware stores for around $40.
2
Hand sand small cracks and crevices in your car. The corners of doors, underside of the body, and the small cracks in between door handles can be tough to reach with a power sander. Keep a few sheets of loose sandpaper around so you can sand down these areas by hand. ^{[7]
X
Research source}
- To make hand sanding easier, staple a piece of sandpaper to a block of wood so it’s easier to hold onto.

Question 4 of 6:

What grit sandpaper should you use to sand a car?

Download Article

This will roughly take off the outermost layer of paint and primer. You might notice that it looks a little scratched and rough at this point, but that’s okay. ^{[8]
X
Research source}
This sandpaper is a little smoother, and it will help remove some of the scratches that the previous sandpaper left behind. Your car won’t look perfect at this point, but that’s all right. ^{[9]
X
Research source}
3
Finish with 1200- to 2000-grit wet-to-dry sandpaper. This will give your car the silky smooth finish that it needs for your new coat of paint. Soak your wet-to-dry sandpaper in water overnight, then use it like you normally would over your entire car. ^{[10]
X
Research source}
- It’s super important to soak your wet-to-dry sandpaper before you use it. Using wet-to-dry sandpaper while it’s dry can scratch your car.
- Using wet-to-dry sandpaper will give your car a smoother finish than typical sandpaper will.

Question 5 of 6:

How much do you need to sand before repainting?

Download Article

Sand down to the bare metal of the car. Most experts recommend sanding until you’ve removed both the paint and the primer from the car. This can take a long time, but the new coat of paint will go on much smoother if you do. ^{[11]
X
Research source} Obviously, the kind of sand and the quantity of sanding will depend on what exactly do you want to do with the car.
- If you aren’t as worried about getting a smooth coat, you can sand down to the primer instead of the bare metal.

Question 6 of 6:

How do you deal with rust on your car?

Download Article

1
Sand it down with 40- to 50-grit sandpaper to start. You can hand sand or use a power sander, depending on where the rust is. Use your sandpaper to strip off the rust and the surrounding paint until you can see bare metal poking through. ^{[12]
X
Research source}
- This method works well for surface rust, or rust that hasn’t penetrated all the way through the body of your car. If your car has holes in it from rust, take it to a professional.
2
Add 2 layers of rust converter to the area before you paint. Put on a pair of rubber gloves and use a brush or a sponge to apply a thin layer of rust converter where the rust used to be. Wait 15 to 30 minutes for the product to dry, then add a second layer. Wait for the second layer to dry all the way before you start painting your car. ^{[13]
X
Research source}
- Rust converters contain chemicals that react with the rust and convert it into a harmless compound that won’t hurt your car.
- You can find rust converters at most auto body shops.

Community Q&A

Search

Add New Question

Question

How long after painting do I apply clear coat?

Community Answer

I usually paint onto a strip of scrap metal that's primed - that way I have another piece to touch and feel how the paint feels without touching the car. Once its dry, (about 24 hours), hit it with some super fine SP and spray it down with the clear coat.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 12
Question

how do you keep the paint from getting in the door jams?

Wiliiam-james

Community Answer

To prevent paint from getting into door jams during vehicle painting, the process involves careful masking. Painters use masking tape and masking paper to cover the edges and openings of the door jams, ensuring they remain protected from overspray. The tape is applied precisely along the seam where the door meets the frame, and the masking paper is used to cover the rest of the door jam area, leaving no exposed surfaces. This meticulous masking technique ensures that the paint is applied only to the intended exterior surfaces, leaving the door jams clean and unpainted.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 1

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Go slowly to ensure you get a smooth, even sand.

Thanks
Helpful 0 Not Helpful 1

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Read the manual for your power sander before you use it.

Thanks
Helpful 1 Not Helpful 0

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

Log in

How to Sand a Car for Repainting

Things You Should Know

Steps

Can you paint over existing auto paint without sanding?

What’s the best method for sanding a car?

What kind of sander should you use to sand a car?

What grit sandpaper should you use to sand a car?

How much do you need to sand before repainting?

How do you deal with rust on your car?

Community Q&A

Tips

Warnings

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories