How to Sew Bias Binding

PDF download Download Article
PDF download Download Article

Bias binding is a long, narrow piece of fabric that has been pre-folded in a couple of places. Sewing bias binding onto the edges of fabric is a way to cover the raw edges and add interest to a garment, blanket, or other item. You can sew bias binding with a single fold so that all of the binding appears on one side of the fabric’s edge, or you can sew bias binding so that half of the bias binding appears on each side of the fabric’s edge. If you are sewing bias binding along an edge where the two ends will meet, then you will also need to join the ends of the bias binding to complete your project.

Tips for Sewing Bias Binding

Mark the fabric 6 mm from the raw edge and line up the unfolded edge of the binding with the mark. Insert pins to hold the binding in place and sew a straight stitch along the upper crease. Fold the binding over the edge of the fabric to the other side and sew a straight stitch 3 mm from the edge of the binding.

Method 1
Method 1 of 3:

Sewing Single-Fold Bias Binding

PDF download Download Article
  1. The bias binding will need to cover the raw edge of your fabric, but placing it too close to the raw edge may result in a weak seam. To ensure a strong seam, you will need to place the edge of the binding slightly in from the edge of your fabric. Mark the fabric about 6 millimetres (0.24 in) from the raw (cut) edge to indicate where you will place the edge of the binding.
  2. Watermark wikiHow to Sew Bias Binding
    Unfold one edge of the bias binding, and line up the raw edges of the bias binding with the chalk line you have marked onto the fabric. The right (front) side of the bias binding and the right (front) side of your fabric should be facing each other. Insert pins through the bias binding and fabric to hold them together. [1]
    • Make sure to fold under the ends of the bias binding so that the raw edges will not be visible.
    • You can also use clips to hold the bias binding in place. These will prevent you from making holes in the bias binding or fabric, which may be a concern especially if the fabric or binding are made from a delicate material. [2]
    Advertisement
  3. Watermark wikiHow to Sew Bias Binding
    The bias binding should have folded edges that run the length of the binding. When you open the folds up, you will see that the binding has a crease. Use your sewing machine to sew a straight stitch into this crease to secure your bias binding and fabric together. [3]
  4. Watermark wikiHow to Sew Bias Binding
    After you have sewed the bias binding to the fabric, fold over the bias binding so that it covers the seam allowance of your fabric. Next, use an iron to press this seam and make the bias binding lay flat over the seam allowance. [4]
    • Use your iron on a low setting or one that is appropriate for your fabric. If you are worried about damaging the fabric, then place a t-shirt or cotton cloth over the fabric before you iron it.
  5. Watermark wikiHow to Sew Bias Binding
    Next, fold the bias binding over the edge of your fabric again. Fold the bias binding at the seam you created so that the bias binding will be completely hidden on the opposite side of your fabric. [5]
  6. After you have folded the bias binding, use your iron to press the seam. This will help to keep the bias binding on one side of the fabric and create a nice neat edge for your work. [6]
  7. Watermark wikiHow to Sew Bias Binding
    To secure the bias binding, sew a straight stitch about 3 millimetres (0.12 in) from the edge of the bias binding. Use your sewing machine to do this. Make sure that the bias binding edge is folded under so that it will be hidden. [7]
    • After you finish sewing, trim off the excess threads.
    8. Advertisement
Method 2
Method 2 of 3:

Sewing Double-Fold Bias Binding

PDF download Download Article
  1. Watermark wikiHow to Sew Bias Binding
    Line up the raw edges of your bias binding and fabric and pin the edges together. Make sure to unfold your bias binding first and pin the bias binding and fabric together so that the right (front) sides of the materials are facing each other.
    • Make sure to fold and pin under the ends of the bias binding so that they will not be visible when you are finished.
  2. Watermark wikiHow to Sew Bias Binding
    If there is any excess fabric that goes beyond the edge of the bias tape, then trim this fabric off. Do not trim off any of the bias binding. Only trim off the fabric that extends past the edge of the bias binding.
  3. Watermark wikiHow to Sew Bias Binding
    Locate the creased area of your bias binding. Use your sewing machine to sew a straight stitch down the length of the crease. When you get to the end, backstitch by a few stitches to secure the stitches.
    • To backstitch, press the lever on the side of your sewing machine while you are applying gentle pressure to the pedal. After making a few stitches in the opposite direction of the others, take your foot off the pedal and remove the item from the sewing machine.
  4. Watermark wikiHow to Sew Bias Binding
    Next, fold over the bias tape so that it is covering the seam allowance. This is the raw (cut) edge of your bias tape and fabric. Use an iron to flatten out the seam.
  5. Watermark wikiHow to Sew Bias Binding
    Then, fold over the bias tape again so that half of the bias tape is on each side of the fabric’s edge. Make sure that the free end of the bias tape is folded under to prevent the raw edge of the bias tape from showing.
  6. To create a flat edge along the bias tape, use an iron to press along the folded fabric. This is the area that wraps around the edge of the edge of the fabric.
  7. Watermark wikiHow to Sew Bias Binding
    After you have pressed the edge, use your sewing machine to sew a straight stitch along the free edge of the bias tape. Make sure that the raw edge of the bias tape is folded under so that it will not be visible. Sew the stitch so that it is right along the edge of the bias tape.
    8. Advertisement
Method 3
Method 3 of 3:

Joining the Edges of Bias Binding

PDF download Download Article
  1. Watermark wikiHow to Sew Bias Binding
    When you cut your bias binding for the project, make sure that you cut a little more than you will actually need to cover the edges. This will allow you to sew the edges together in a way that will hide the ends of the bias binding.
    • For example, if your project calls for 20 inches (51 cm) of bias binding, then cut 21 inches (53 cm) to ensure that you will have enough to hide the ends.
  2. Watermark wikiHow to Sew Bias Binding
    Make sure to sew the bias binding edges first. You need to sew the ends under the rest of the bias tape to hide them, so it is necessary to secure and fold over the ends before sewing any other parts of the binding.
  3. Watermark wikiHow to Sew Bias Binding
    The ends of the bias binding will be raw, so it is important to hide these. With the right sides of the bias binding and fabric together, pinch the ends of the bias tape together to identify where they will meet. Use a piece of chalk to mark the areas where the right (front) sides of the bias binding meet. [8]
  4. Watermark wikiHow to Sew Bias Binding
    After you have marked the bias binding, place a pin on each end to hold the pieces together where you marked them. Make sure the pin goes through the ends of the bias tape and the fabric underneath it. [9]
  5. Watermark wikiHow to Sew Bias Binding
    To secure the bias binding together where you have marked it, use your sewing machine on the straight stitch setting to sew a few stitches into the crease up to the areas you have marked on each side of the bias binding. Do not sew across the bias binding pieces. Make two separate sets of stitches. [10]
    • Be careful not to sew through the pins and remove them as you sew.
  6. Watermark wikiHow to Sew Bias Binding
    After the bias binding is secured at the ends, fold down the excess bias binding on the ends. Fold each end towards the rest of the bias binding and away from the stitches you just made. This will ensure that the bias binding will be hidden under the rest of your seams. [11]
  7. Watermark wikiHow to Sew Bias Binding
    After you finish securing the ends of the bias binding, sew the rest of the bias binding as desired for your project. You can either sew the bias binding single-sided, so that it will be hidden under one side of your project , or you can sew the bias binding double-sided so that half of the binding will be visible on each side of the edge of the fabric. [12]
    8. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What is bias binding?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    Bias binding is double-sided, folded long strips of fabric that can be cut into different lengths and used for finishing, edging or binding a sewing or fabric project. Raw edges of fabric can be tucked inside the bias binding and sewed securely in place.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 8
  • Question
    What is back stitch?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    Back stitch or backstitch is a sewing stitch used for making a long-lasting join between pieces of fabric. On the right side of the fabric, you will see a continuous row of stitches, with the back stitches that are reinforcing the join showing only on the back or wrong side of the project. To do back stitch, see How to Back Stitch .
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 6
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You’ll Need

      • Bias binding
      • Ruler
      • Chalk
      • Pins
      • Scissors
      • Sewing machine
      • Thread

      You Might Also Like

      How to
      Sew a Glove
      How to
      Put Eyelets in Fabric
      How to
      Sew Patches on Jeans by Hand
      How to
      Sew Fur Pelts Together
      How to
      Do a French Knot
      How to
      Sew a Mitered Corner
      How to
      Make a Box Styled Gimp
      How to
      Remove Needle Marks from Fabric
      How to
      Make Adjustable Straps
      How to
      Fix a Gaping Shirt
      How to
      Sew on a Shirt Button
      How to
      Sew Circles and Pucker-Free Circular Seams and Hems
      How to
      Sew Velcro by Hand
      How to
      Make a Hacky Sack
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about sewing, check out our in-depth interview with Shaelynn Haning .

      References

      1. ↑ https://www.youtube.com/watch?v=ilvrlxzbFYo&feature=youtu.be&t=1m20s
      2. ↑ https://www.positivelysplendid.com/sew-bias-tape/
      3. ↑ https://www.youtube.com/watch?v=ilvrlxzbFYo&feature=youtu.be&t=2m9s
      4. ↑ https://www.youtube.com/watch?v=ilvrlxzbFYo&feature=youtu.be&t=3m12s
      5. ↑ https://www.youtube.com/watch?v=ilvrlxzbFYo&feature=youtu.be&t=3m12s
      6. ↑ https://www.youtube.com/watch?v=ilvrlxzbFYo&feature=youtu.be&t=3m25s
      7. ↑ https://www.youtube.com/watch?v=ilvrlxzbFYo&feature=youtu.be&t=3m34s
      8. ↑ https://www.positivelysplendid.com/sew-bias-tape/
      9. ↑ https://www.positivelysplendid.com/sew-bias-tape/
      1. ↑ https://www.positivelysplendid.com/sew-bias-tape/
      2. ↑ https://www.positivelysplendid.com/sew-bias-tape/
      3. ↑ https://www.positivelysplendid.com/sew-bias-tape/

      About This Article

      Article Summary X

      Bias binding is a narrow piece of pre-folded fabric used to cover the edges of a garment. To add a single bias binding to cover 1 side of a fabric’s edge, unfold one of the bias binding edges and line it up with the edges of the fabric. Open the folds up and sew along the crease with a sewing machine to secure it. Fold it over the edge of the fabric and sew along the other edge of the binding. To sew a double-fold bias binding so half of it appears on each side of the fabric’s edge, pin the binding to the edge of your fabric and trim off the excess fabric with scissors. Sew along the crease with your sewing machine, then fold the binding over so half is on each side of the fabric’s edge and sew along the other edge of the binding. To learn how to join edges of bias binding, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 136,517 times.

      Reader Success Stories

      • Linda Keenan

        Sep 11, 2019

        "Best clear graphic material I have ever seen. Great for people who learn visually. Please show more basics on ..." more
      Share your story

      Did this article help you?

      Advertisement