How to Sew a Shirt

PDF download Download Article
PDF download Download Article

As long as you know how to operate a sewing machine, you can sew your own shirt. If you've never sewn a shirt before, though, it might be easiest to start with a basic t-shirt. Work from a pattern or draft your own to begin the process.

Part 1
Part 1 of 4:

Creating the Perfect Pattern

PDF download Download Article
  1. The easiest way to draft your own shirt pattern will be to copy the shape of an existing shirt that fits well.
    • While this tutorial only covers t-shirt drafting and construction, you can follow the same basic steps to help draft patterns for other shirt styles.
  2. Fold the shirt in half vertically, keeping the front sides out. Lay the halved shirt over a large sheet of paper.
    • Ideally, you should place the paper over thick cardboard before placing the shirt on top. The cardboard will provide a stiff enough work surface to trace over. Moreover, you'll need to stick pins into the paper, and doing so will be easier to accomplish with cardboard backing.
    Advertisement
  3. Pin along the perimeter of the shirt, paying special attention to the back neckline seam beneath the collar and the sleeve seam. [1]
    • The pins you insert along the shoulder seam, sides, and bottom hem do not need to be precise since their main purpose is to hold the shirt down.
    • For the sleeve seam, stick the pins straight down through the seam and into the paper. Space the pins no further than 1 inch (2.5 cm) apart.
    • For the back neckline, stick the pins straight down through the seam connecting the back neckline to its collar. Space the pins 1 inch (2.5 cm) apart.
  4. Use a pencil to lightly trace around the entire outline of the shirt.
    • Trace along the shoulder, sides, and bottom of the pinned shirt.
    • After tracing these elements, lift away the shirt and find the holes marking the sleeve seam and neckline seam. Trace along these holes to complete the outline for the back pattern piece.
  5. Move the folded shirt over to a fresh piece of paper, pinning along the front outline instead of the back.
    • Follow the same steps used for the shirt back to place the pins along the perimeter and sleeves of the shirt front.
    • The front neckline is usually deeper than the back. To mark it out, place the pins beneath the front portion of the neckline, just beneath the collar. Keep them 1 inch (2.5 cm) apart and straight down.
  6. Trace along the front outline just as you traced along the back outline.
    • Lightly trace the shoulder, sides, and bottom with pencil while the shirt remains pinned in place.
    • Remove the shirt and trace along the pin marks of the neckline and sleeve to complete the front outline.
  7. Unfold the shirt. Flatten out one sleeve and pin it to clean paper. Trace around the outline.
    • As before, insert the pins straight through the connecting seam.
    • Trace around the top, bottom, and outer edge of the sleeve with the sleeve still in place.
    • Remove the shirt from the paper and trace along the pin-marked seam to complete the outline.
  8. Use a flexible ruler and pencil to carefully draw another outline around the current perimeter of each piece. This secondary outline will be the seam allowance.
  9. Label each piece by part (back body, front body, and sleeve). Mark the fold line of each piece, as well.
    • The fold line of the front and back body pieces will be the straight, folded edge of your original shirt.
    • The fold line of the sleeve will be the straight top edge of the sleeve.
  10. Carefully cut around each pattern piece outline. When finished, verify that the pattern pieces match one another.
    • When you place the open sides of the front and back pieces together, the shoulders and armholes should match up.
    • When you place the sleeve over the armhole of either main body piece, the actual measurement (not the seam allowance) should also match up.
    11. Advertisement
Part 2
Part 2 of 4:

Preparing the Material

PDF download Download Article
  1. Most t-shirts are made with knit fabric, but you may wish to choose a knit fabric with a fairly low amount of stretch to make the sewing process easier.
    • As a general rule, though, it will be easiest to duplicate the fit of the original shirt you drafted your pattern from if you use a material similar in construction and weight.
  2. Wash the fabric. Wash and dry the material as you usually would before you do anything else with it.
    • By washing the fabric first, you can pre-shrink it and set the dye. As a result, the pattern pieces you cut out and sew together should be more accurately sized.
  3. Fold the material in half and place your pattern pieces on top. Pin the pattern down, trace around it, and cut around each piece.
    • Fold the material in half with the right-sides facing in, and keep the fabric as flat as possible when you lay it out.
    • Match the fold of the fabric to each "fold" mark on your pattern pieces.
    • When pinning the pattern pieces in place, pin straight through both layers of material. Trace around the entire outline with fabric pencil, then cut along the outline without unpinning the pattern.
    • After cutting out the material, you can unpin and remove the paper pattern pieces.
    4. Advertisement
Part 3
Part 3 of 4:

Preparing the Ribbing

PDF download Download Article
  1. Measure the full neckline of your shirt with a flexible ruler or measuring tape. Subtract 4 inches (10 cm) from this measurement, then cut a piece of ribbing to that length. [3]
    • Ribbing is is a type of knit fabric with vertical ribs. You can technically use non-ribbed knits for your collar, but ribbing is generally preferred since it has an even greater amount of elasticity.
    • Cut the width of the ribbing to double the amount of your final collar width.
    • The vertical ribs should run parallel to the width of the collar and perpendicular to the length of the collar.
  2. Fold the ribbing in half lengthwise, then use an iron to press the fold.
    • Note that the right-sides should be facing as you do this.
  3. Fold the ribbing in half crosswise. Stitch the width ends of the strip together, using a 1/4-inch (6-mm) seam allowance.
    4. Advertisement
Part 4
Part 4 of 4:

Sewing the Shirt

PDF download Download Article
  1. Place the front and back body pieces together, right-sides facing inward. Pin around the shoulders only.
  2. Stitch straight across one shoulder seam. Cut the thread, then stitch straight across the other shoulder seam.
    • You should be able to use a standard straight stitch on your sewing machine for this.
    • Follow the seam allowance you marked out on your pattern pieces. If you've been following this tutorial exactly, the seam allowance will be 1/2 inch (1.25 cm).
  3. Open the shirt and lay it flat at the shoulders, right-sides facing down. Place the ribbed collar over the neckline opening and pin it in place.
    • Point the raw side of the collar toward the neckline and keep it above the shirt material. Pin it to the center back of the shirt and the center front.
    • The collar will be smaller than the neckline opening, so you'll need to gently stretch the collar as you pin it down to the rest of the neckline. Try to keep the ribbing evenly spaced.
  4. Using a zigzag stitch, sew along the raw edge of the collar, using a 1/4 inch (6 mm) seam allowance.
    • You must use a zigzag stitch instead of a straight stitch; otherwise, the thread won't be able to stretch with the collar as you pull the finished garment over your head.
    • Use your hands to gently stretch the ribbing as you sew it onto the shirt. Keep it somewhat taut so that no folds form in the connecting fabric.
  5. Keep the shirt open and flat at the shoulder, but flip it over so that the right-side faces up. Position the sleeves right-side down and pin in place. [4]
    • Position the rounded portion of the sleeve against the rounded portion of the armhole. Pin the middle of both curves together.
    • Gradually position and pin the rest of the sleeve curve to the rest of the armhole, working on one side at a time.
    • Repeat this process for both sleeves.
  6. With the right-sides facing down, sew a straight stitch along both sleeves, connecting them to the armholes in the process.
    • The seam allowance should match the seam allowance you marked on your original pattern. If you're following this tutorial exactly, the amount should be 1/2 inch (1.25 cm).
  7. Fold the shirt with its right-sides facing. Sew a straight stitch down the entire right side of the shirt, working from the tip of the underarm seam straight down to the bottom opening. Repeat on the left side of the shirt when finished.
    • Pin down the sleeves and sides before stitching them together; otherwise, the material may shift as you work.
    • Follow the seam allowance you marked on your original pattern. For this tutorial, the seam allowance is 1/2 inch (1.25 cm).
  8. With the right-sides still facing, fold the bottom edge up according to your original seam allowance. Pin or press the fold in place, then stitch around the opening.
    • Make sure that you only stitch the hem in place. Do not sew the front and back sides of the shirt together.
    • Most knits are fray-resistant, so you may not need to sew a bottom hem. Doing so can create a neater appearance, though.
  9. With the right-sides facing, fold up the edge of each sleeve opening according to your original seam allowance. Pin or press the fold, then stitch along the opening.
    • Like the bottom edge, you must stitch around the opening to avoid sewing the front and back together.
    • You may not need to hem the sleeves if the material is fray-resistant, but they'll look neater if you do.
    Inch towards a clothing line dream. "As an aspiring clothing designer, I was stuck on shirt construction. This guide walked me through pattern drafting and sewing steps so clearly! I finally completed my first wearable tee. My confidence is soaring, and I feel that much closer to launching a line someday, thanks to these tips." - Aaron B.
    Conquer a sewing roadblock. "I kept hitting snags trying to self-teach a t-shirt build. The diagrams here illustrating pattern drafting, ribbing prep, and step-by-step construction showed me what I was missing! I whipped up my first tee in the afternoon. This advice helped me hurdle my shirt-sewing struggles once and for all." - Bethany H.
    Apply specialized skills to unfamiliar areas. "Though I tailor African menswear, Western-style shirts were out of my comfort zone. But this article broke down the process so simply that I could apply my existing skills. Following the visual guides for drafting and sewing let me construct my first tee with ease. Now, I can expand my talents thanks to these lessons." - David C.
    Gain knowledge assisting loved ones. "I was planning to sew a shirt for my mom but lacked confidence despite basic sewing skills. The reassuring tips, like starting with a knit and tracing each pattern piece, gave me a foolproof roadmap. Knowing I can surprise Mom with a handmade tee that fits nicely makes all this effort rewarding." - Shana U.
    Have a story our readers should hear? Share it with 1 billion+ annual wikiHow users. Tell us your story here .
  10. Turn the shirt right-side out again. Use an iron to flatten all the seam.
    • This includes the seams along the collar, shoulders, sleeves, and sides. You may also wish to press the hems, if you did not do so before sewing them in place.
  11. At this point, the shirt should be finished and ready to wear.
    12. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Can I sew this by hand?
    Community Answer
    Yes, but it will be more time consuming than if you sew it by machine.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 56
  • Question
    How can I know which is the left and which is the right sleeve?
    Form voltron
    Community Answer
    The two sleeve pieces are the same until you sew them onto the shirt. You cut them out from the same shape, so left and right are identical.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 61
  • Question
    Do I need to wash the fabric first?
    Community Answer
    No, but it is better if you do, because you want to make sure that it will not shrink afterwards.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 46
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If you don't want to draft your own pattern, use a pre-made pattern. Most fabric stores (and craft stores that sell fabric) sell patterns, and basic shirt patterns will likely be among the selection. You can also find basic patterns online for free or cheap.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Existing t-shirt
      • Pencil
      • Fabric pencil
      • Cardboard
      • Plain paper (plain newsprint, drafting paper, brown package paper, etc.)
      • Straight pins
      • Scissors
      • Fabric scissors, fabric shears, or rotary fabric cutter
      • 1 to 2 yds (1 to 2 m) knit fabric
      • 1/4 yd (1/4 m) knit ribbing
      • Sewing machine
      • Coordinating sewing thread
      • Iron
      • Ironing board

      You Might Also Like

      How to
      Use an Iron
      How to
      Iron Pants
      How Do You Use a Garment Steamer? The Right Way to Steam Clothes
      How to
      Iron a Suit Jacket
      How to
      Iron on Patches to Jackets, Jeans, T-Shirts & More
      How to
      Fold & Put Away an Ironing Board
      Making DIY Iron on Patches: Embroidery, Sewing, & Transfer Paper
      How to
      Unwrinkle Tulle (With or Without a Steamer or Iron)
      How to
      Iron Silk
      How to
      Prevent Clothes from Wrinkling in the Washer and Dryer
      How to
      Iron Without an Ironing Board
      How to
      Steam Dresses
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=R7BysYG7bP8
      2. ↑ Andrea Beaulieu. Professional Tailor & Fashion Designer. Expert Interview. 8 May 2020.
      3. ↑ https://www.youtube.com/watch?v=rlmSvkxZXjM
      4. ↑ https://extension.unh.edu/sites/default/files/migrated_unmanaged_files/Resource004455_Rep6349.pdf

      About This Article

      Article Summary X

      To sew a shirt, start by pinning the shoulders of the body pieces together with the right side facing inwards. Next, use a straight stitch to sew along both shoulders before opening up the shirt with the right side facing down, pinning the ribbing to the neckline, and sewing it in place with a zigzag stitch. Flip the shirt over, then pin the sleeves to the armholes right side facing down and stitch them with a straight stitch. Finally, sew down both sides of the shirt and add hems to the bottom and sleeves. For tips on how to design a shirt pattern and how to choose the best material to use, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 533,208 times.

      Reader Success Stories

      • David C.

        Aug 11, 2019

        "Though I tailor African menswear, Western-style shirts were out of my comfort zone. But this article broke down the ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement