How to Harden Leather: A DIY Guide

PDF download Download Article
Make your leather more durable with these techniques
PDF download Download Article

If you plan on making leather accessories or other leatherwork, you may need to stiffen the leather so it holds its shape. Luckily, there are a ton of effective ways to harden leather. In this article, we’ll teach you all the best leather stiffening methods, including soaking the leather in water, baking it in the oven, applying wax, hammering, and more. Plus, learn the best leather for stiffening, how to care for stiffened leather, and answers to additional questions about stiffening leather.

Ways to Stiffen Leather

  • Submerge leather in cold water, then hot water to stiffen and shape it.
  • Or, soak leather in cool water, then mold it, and bake it in the oven.
  • Alternatively, hammer wet leather until it hardens.
Section 1 of 9:

Stiffening Leather with Water

PDF download Download Article
  1. Fill a large bucket or basin with cool-to-room temperature water, and gently submerge the leather. Make sure the entire piece is immersed and that no air bubbles are trapped underneath, as they can lead to uneven soaking. If you’re only soaking the leather in cold water, let it sit for 30 minutes to an hour. If you plan on soaking it in hot water, as well, let it sit for about 10 minutes. [1]
    • Note that this process works best when used with vegetable tanned leather.
    • It’s possible to stiffen leather in cool water alone, but it will only become a bit harder and you may not be able to shape it. The addition of a hot water step will allow you to make more structural changes while hardening the leather further.
    • This process of soaking leather in water and molding it to your desired shape is called “wet molding.” In some cases, it’s also referred to as “wet forming.” This is one of the simplest stiffening methods, as it doesn’t require a lot of supplies.
  2. If you want to stiffen your leather further, fill a large stockpot with water as the leather soaks in the cool water. Heat the pot until the water reaches 180° F (82° C). If you only want to stiffen the leather will cool water, skip this step and the following. [2]
    • Use an accurate thermometer to keep track of the temperature. If the water is too hot or too cold, your results can vary dramatically from those described here.
    • If you do not have a thermometer, gauge the temperature of the water by slowly heating it on the stove and testing it every minute or so with your bare hand. If you can keep your hand immersed in the water, it is safe to use for your leather. If it’s too hot to the touch, remove the water from the heat source and do not allow it to get any hotter.
    • Some people prefer to soak the leather in boiling water. Doing so stiffens the leather at a faster pace, but it also gives you less control. The resulting leather can become very brittle and may be unevenly stiff across its surface.
    Advertisement
  3. Take the leather out of the cool water and transfer it to the hot water. If the water is hot enough, the edges should curl and darken within the first few seconds. Let it sit for a minute or so, then remove it. [3]
    • The longer you soak the leather, the stiffer it will become. If you soak it too long, however, it will be more brittle when dry.
    • Generally, soaking the water for 30 seconds after it darkens will result in a piece of leather that is hard but not inflexible. The total soak time in the hot water should be about 90 seconds, or leave it in longer if you want it to be stiffer.
  4. After removing the leather from the hot or cold water depending on your chosen method, lay it flat to check for any abnormalities. Pat it dry with a soft, clean cloth, then mold it into your desired shape. It should be fairly flexible after coming out of the water, so wet molding is a great way to shape your leather before it stiffens. [4]
    • When wet, the leather will be stretchy and easy to form. This stretchiness will vanish within the first minute or two, though, so work fast if you plan to stretch it out. The leather will remain flexible for up to an hour, though.
    • Some abnormalities, like air pockets, may have formed due to over-soaking or excessive heat. Consider letting the leather sit for a few seconds so the bubble disappears and the leather swells evenly.
    • If you’re molding the leather around an object, wrap the object in plastic wrap to protect it, then nail or staple the leather to the object to prevent it from moving as you shape it.
  5. Let the leather sit out to air dry. This typically takes 6-8 hours depending on the moisture level and the size and thickness of the leather. Once it dries, the leather should be notably thicker and stiffer. [5]
    • Stiffened leather will also shrink, so the piece may not end up as large as you started out with.
    • If you stapled or nailed the leather to an object, remove them once the leather is completely dry.
    6. Advertisement
Section 2 of 9:

Stiffening Leather by Baking

PDF download Download Article
  1. Fill a sink, bucket, or similar container with room temperature water. Immerse the leather in the water and let it soak until it becomes completely water-logged. The amount of time the leather needs to soak will vary based on the thickness and quality of the leather. 10 to 30 minutes will usually suffice, and the leather should be notably flexible when you remove it. [6]
    • This process is generally recommended for use with vegetable tanned leather.
  2. As the leather soaks, preheat your oven. 120°F (50°C) is ideal because it’s warm enough to stiffen the leather without damaging or altering its natural properties. If your oven doesn’t reach a temperature this low, set it to the lowest temperature available (some recommend 150-200°F or 65-95°C). [7]
    • Move the racks of the oven around as needed to clear enough room for the leather piece.
    • Note that higher temperatures could cause a little steam scalding, which may alter the color and cause greater shrinkage.
  3. After removing the leather from the water, mold it to whatever shape you want the final product to take (like a belt, wallet, etc.) while it’s still flexible and easy to handle. Run your fingers along the edges and creases as you shape the leather and keep molding until the leather holds its shape. [8]
    • Since the leather is still fairly cool at this point, it may not keep its form when left alone. After shaping it, try holding the new form in place using string, stitching, or nails as needed.
  4. Place the leather on a baking tray and slide it in the oven. The heat will slowly start to stiffen it. After 10-15 minutes, put on your oven mitts and remove the tray to check the leather’s stiffness. If it isn’t as rigid as you’d like, place it back in the oven and continue baking. Continue to check every five minutes or so, so you don’t overbake it. [9]
    • It typically takes 30-90 minutes for the leather to harden properly. The exact time varies depending on the size and quality of the weather, how long you soaked it, and the temperature of your oven.
    • You can let the leather remain in the oven even after it dries out, but know that dry-baking it will cause the temperature of the leather to rise, resulting in a harder and more brittle structure.
    • Be aware that the leather will shrink slightly, making the grain tighter.
  5. Remove the hot, dry leather from the oven and let it cool at room temperature until it is safe to handle with your bare hands. As it cools, it will continue to stiffen and retain the shape you molded earlier. Once cool, remove any string, thread, or nails holding the shape in place. [10]
    • If you plan on working with the leather further, it is ready once it’s cool.
    6. Advertisement
Section 3 of 9:

Stiffening Leather with Wax

PDF download Download Article
  1. Let the oven warm up completely, then place your leather on a baking sheet and slide it inside. Bake the leather for about 30 minutes to prepare it for the wax application. The leather should be notably hot to the touch when you take it out. [11]
    • Warning: This method involves boiling wax, which can splash and burn you or anyone nearby. Use caution if you choose to try this method.
    • Make sure the oven racks are rearranged if needed so that the leather piece can fit inside without brushing against the racks or sides of the oven.
    • This method should work with most types of leather, but vegetable tanned leather is the easiest to work with. This is also a good method if you’re trying to stiffen leather that has already been formed and does not need any additional shaping.
    • Be careful not to let the leather get too hot, however, as it can become too brittle by the end of the process.
  2. Heat 1-2 in (2.5-5 cm) of water in the bottom part of a double boiler placed on the stove over medium-high heat. Place a block of beeswax inside the top part of the double boiler and stir it with a disposable spoon or chopstick until it melts completely. It’s best to do this as the leather bakes so that the leather and the wax will both be hot enough to proceed at the same time. [12]
    • Beeswax is the preferred wax for this method, but melted candles or nearly any other type of wax will work, as well.
  3. If you haven’t already, take the leather out of the oven, then place it on a few sheets of newspaper. Dip a paintbrush into the melted wax and apply a thin layer to the leather using even strokes, making sure the entire surface is covered. Continue brushing the wax onto the leather until the leather cools and no longer absorbs the wax. [13]
    • The leather should soak up the hot wax. If it does not do so, the leather is not yet hot enough and should be returned to the oven.
    • Not only will the wax stiffen the leather, but it will also give it a nice, glossy sheen.
  4. After your initial coat of wax, place the leather back into the oven and heat it for another 20 minutes or so. Remove it from the oven and brush the surface with an additional coating of melted wax. Repeat this process until the leather no longer absorbs wax, even when hot, then do one final bake for another 10 minutes. [14]
    • One way to tell that the leather can no longer absorb wax is to look at the coloring. The wax will alter the color of the leather slightly. If the entire surface of the leather is an even color, it has likely absorbed as much wax as possible throughout the entire piece.
    • Doing a final 10 minute bake will ensure the wax sets into the leather so it becomes stiff and durable and has a glossy finish.
  5. Allow the leather to cool to room temperature, then use a soft cloth to buff its surface. This will enhance its shine and give it a professional appearance. It will also help smooth out any uneven wax application, creating a consistent finish. At this point, the leather should be extremely hard and nearly impossible to bend. [15]
    6. Advertisement
Section 4 of 9:

Stiffening Leather by Hammering

PDF download Download Article
  1. Fill a bucket, bowl, or sink with warm water and place the leather inside, making sure it’s completely immersed. [16] Soaking the leather will make it more receptive to shaping. In general, let it sit for about 10 minutes, though the time needed may vary depending on the type of leather, its size, and its thickness.
    • Another option is to dampen the leather with a spray bottle.
  2. Place the leather on an anvil or flat surface where it can be hammered without damage. Smooth out any wrinkles and make sure it’s perfectly flat. Then, start hammering the surface, preferably with a flat-faced hammer , going over the whole area multiple times. The leather will start to become stiffer with each blow. [17]
    • The leather will likely take the shape of the hammer’s head as you work, but you can smooth it out with your fingers or a roller when you’re done.
    • Be aware that hammering a stamped , carved, painted, dyed, or burnt piece of leather will likely alter the results.
    • Continue hammering until you achieve the desired level of stiffness. This could be a bit of a workout, so patience is key.
  3. If you’re planning on molding the leather around something, do so before drying so it holds its shape. Place the leather in a cool, dry area where it can air dry evenly. Avoid placing it in direct sunlight, as this could cause discoloration. [18]
    4. Advertisement
Section 5 of 9:

Stiffening Leather with Compression Molding

PDF download Download Article
  1. This method requires specialized machinery, like a hydraulic press , so it’s most often used by professionals. [19] If you have access to this equipment, make sure everything is in optimal condition. Clean your machinery thoroughly and remove any debris or residue that may affect the leather’s finish.
    • Only use this method if you’re familiar with and comfortable using this machinery. Make sure to follow all manufacturer guidelines to use the tools safely.
    • This method works well if you need leather that is precisely shaped. It’s great for complex or large leather pieces, like armor components or structural parts.
  2. Make sure your leather is cut to your desired shape and size, then position it between the metal plates or molds of your hydraulic press or other compression machine. Make sure the leather is completely flat and smooth out any wrinkles or folds. This will help ensure the pressure is evenly distributed. [20]
  3. Turn on your hydraulic press or other machinery and follow the manufacturer’s instructions to properly press the leather. As the machine’s pressure increases, the leather’s fibers will compress, causing it to stiffen. Depending on the leather’s thickness and your desired stiffness, this may take anywhere from 10 to 30 minutes. [21]
  4. Once you’ve achieved your desired stiffness, release the machine’s pressure and carefully remove the leather from between the plates or molds. Inspect the leather for quality and consistency. If it isn’t as stiff as you’d like, place it back inside the machine until you like the results.
    5. Advertisement
Section 6 of 9:

Stiffening Leather with Resin Coating

PDF download Download Article
  1. Wipe down the leather’s surface with a clean cloth to remove any dirt, oils, or residues. It’s important to have a clean surface so the resin adheres properly. Lay the leather flat and smooth out any wrinkles or folds. [22]
    • If your leather has wrinkles, leatherworker Mallika Sharma says you can “put a soft muslin cloth on top of the leather and then press it with a hot iron to flatten the wrinkles.”
  2. Resins often contain strong fumes, so it’s important to work somewhere with good air circulation. For the best results, choose an epoxy or polyurethane resin and prepare it according to the manufacturer’s instructions. Some may come pre-mixed, while you’ll need to mix others yourself. [23]
  3. Lay the leather out flat if you haven’t already done so, and dip a paintbrush into the resin. Apply a thin, even layer to the entire surface of the leather. Use smooth, even strokes for the best results, and don’t paint the resin on too thickly.
  4. The exact time it takes depends on the resin you’re using, so refer to the manufacturer’s guidelines to find out how long you need to wait. [24] As the resin cures, it will start to form a durable coating that will stiffen the leather. The resin will reinforce the leather, making it more resistant to abrasion, stretching, and moisture.
    5. Advertisement
Section 7 of 9:

Caring For & Maintaining Stiffened Leather

PDF download Download Article
  1. Gently wipe stiffened leather with a clean, damp cloth to remove dirt and debris. Don’t get the leather too wet, though, as this could cause damage. Avoid cleaning your leather with harsh chemicals or abrasive cleaners, as well, as they often damage leather’s surface. [25]
  2. Use a leather conditioner or other specialized product according to the manufacturer’s instructions. Conditioning the leather every 3-6 months will help it maintain its suppleness and prevent it from becoming brittle or drying out. [26]
    • While stiffened leather is more durable, it can weaken and crack if exposed to excessive bending or folding. If you have to bend your leather for whatever reason, condition it so it’s more supple and less likely to crack.
  3. To keep your leather looking and feeling its best, keep it away from high moisture levels and/or extreme temperatures. Keep it in a cool, dry place away from direct sunlight so it maintains its texture and color. [27]
    4. Advertisement
Section 8 of 9:

Best Leather for Stiffening

PDF download Download Article
  1. There are several types of leather that can be successfully hardened, but most experts recommend vegetable-tanned leather because it holds shape well. This leather is put through a natural plant-based material tanning process, which gives it a firmer texture than other tanning methods. Vegetable-tanned leather works well for boiling, baking, and hammering techniques. [28]
    • Full-grain leather is also known to stiffen well.
    • Leathers like chrome-tanned, oil-tanned, and top-grain can be stiffened to some degree, but do your research beforehand to make sure the stiffening method you choose will work.
    • In general, nubuck, suede, patent leather, and bonded leather cannot be stiffened.
Section 9 of 9:

Stiffening Leather FAQs

PDF download Download Article
  1. Hardened leather has been used for various reasons throughout history and in modern times. Consider using stiffened leather to make accessories like belts, wallets, and even jewelry. Hardened leather is also used to create durable shoe soles, protective book covers , furniture accents, and other decorative and structural elements in architecture. [29]
  2. Stiffened leather has been used across cultures and time periods for various reasons. Ancient civilizations like the Romans and medieval knights used it for armor, while many indigenous peoples considered leatherworking an important part of their heritage. Leather was also used, and is still used, by craftsmen and artisans. [30]
  3. With proper care, stiffened leather can last several years or even decades. How long it lasts depends on the type of leather and the stiffening method used, as well as how it’s maintained. Be sure to clean and condition your leather regularly, and store it in a cool, dry area to extend its life. [31]
  4. Soak your leather in room temperature water for approximately 10 minutes. This can be used as its own stiffening method or to prepare the leather for an additional stiffening method, like baking. Soaking the leather makes it more supple so it’s less likely to crack throughout the hardening process. [32]
    • If you want to avoid shrinking the leather as well, Sharma says you can stiffen it “by sprinkling water on it and then tumble drying it.”
  5. It’s possible to somewhat reverse some stiffening methods by conditioning or softening the leather . [33] However, it’s challenging, if not impossible, to get the leather back to its original state. Be sure you want to stiffen the leather before doing so.
  6. Yes, it’s possible to stiffen dyed or colored leather. However, some stiffening methods, like those involving heat or water, may alter the color slightly. Test your preferred method on a small, inconspicuous area first to see how the leather reacts. [34]
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I harden fake leather after I have already sewn it?
    Community Answer
    If you want stiff leather, I would recommend a mixture of Elmer's glue and water.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 14 Helpful 42
  • Question
    My purse handle was stiff, but has slowly lost its shape. How can I restore it?
    Community Answer
    If it's the kind of handle I'm thinking of, they usually have a core of hard, cheaper material to give it form, and the leather is sewn around it. The best thing to do would be to cut the sewing line and re-do the handle's core; that way you can put even better quality materials inside, which will last longer.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 17
  • Question
    I have some thin, soft leather I want to practice stamping on, but it won't hold. Is there a way to stiffen it so it will hold the print?
    Community Answer
    Try mixing water with a small amount of cornstarch or corn flour! It should be a cloudy-like water. Dip it and let it sit for 24 hours before stamping. I haven't tried this, but from crafting experience, this method works well for stiffening hemp string when making string designs!
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 38 Helpful 9
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Things You'll Need

      Water Soaking

      • Bucket of cold water
      • Pot of hot water

      Baking

      • Bucket of room temperature water
      • Baking sheet
      • Oven

      Wax

      Hammering

      • Bucket of room temperature water
      • Hammer

      Compression Molding

      Resin Coating

      Tips

      • Before attempting a hardening method on your leather project, test it on a small piece of leather to ensure it won’t damage the leather.
        Thanks
        Helpful 1 Not Helpful 0
      • The best stiffening method depends on your desired outcome. Water-based methods tend to work well for mildly stiff textures, while resin or wax are better for achieving a very hard texture.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • When handling hot leather, do not allow it to touch any hot metal. Touching hot metal to the surface of hot leather will leave a mark on the leather.
        Thanks
        Helpful 16 Not Helpful 3
      • When using resin or other chemicals, always work in a well-ventilated area.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      10 Simple Ways to Check if Genuine Leather is Real
      2 Effective Ways to Tan a Hide at Home
      How to
      Get Bad Smells out of Leather
      How to
      Make Moccasins
      How to
      Repair Torn Leather
      How to
      Punch a Hole in a Leather Belt
      How to
      Restore Suede
      How to
      Fix Faux Leather Peeling
      How to
      Make Leather Bracelets
      How to
      Stretch Leather
      How to
      Renew a Leather Couch: Restore Color & Revive Your Aging Leather
      How to
      Hand Sew Leather
      How to
      Repair Cracked Leather
      How to
      Stamp Leather
      Advertisement

      References

      1. ↑ https://leatherdiscover.com/how-harden-leather/
      2. ↑ http://www.daviddfriedman.com/Medieval/StarvingStudent/Starving%20Student%20Articles/PerfectArmor.pdf
      3. ↑ http://www.daviddfriedman.com/Medieval/StarvingStudent/Starving%20Student%20Articles/PerfectArmor.pdf
      4. ↑ https://leatherdiscover.com/how-harden-leather/
      5. ↑ https://leatherdiscover.com/how-harden-leather/
      6. ↑ https://leatherdiscover.com/how-harden-leather/
      7. ↑ https://leatherdiscover.com/how-harden-leather/
      8. ↑ https://leatherdiscover.com/how-harden-leather/
      9. ↑ https://leatherdiscover.com/how-harden-leather/
      1. ↑ https://leatherdiscover.com/how-harden-leather/
      2. ↑ http://www.daviddfriedman.com/Medieval/StarvingStudent/Starving%20Student%20Articles/PerfectArmor.pdf
      3. ↑ http://www.silverquill.net/research/wax_hardening.html
      4. ↑ http://www.silverquill.net/research/wax_hardening.html
      5. ↑ http://www.silverquill.net/research/wax_hardening.html
      6. ↑ http://www.silverquill.net/research/wax_hardening.html
      7. ↑ https://youtu.be/inzmeC4MxEs?t=183
      8. ↑ https://youtu.be/5X_GtyfzvmI?t=38
      9. ↑ https://www.artofmanliness.com/skills/manly-know-how/how-to-care-for-leather/
      10. ↑ https://leatherdiscover.com/how-harden-leather/
      11. ↑ https://leatherdiscover.com/how-harden-leather/
      12. ↑ https://leatherdiscover.com/how-harden-leather/
      13. ↑ https://www.artofmanliness.com/skills/manly-know-how/how-to-care-for-leather/
      14. ↑ https://compositeenvisions.com/wp-content/uploads/2021/06/epoxy-mixing-guide.pdf?srsltid=AfmBOoqZwYpl8EhUNt6Lc9vBtKvSh1Vy3rvWjjcSmRQmhGqQVH7QX1nv
      15. ↑ https://boatbuildercentral.com/support-tutorials/Tutorials/epoxy-resin-cure-times.pdf
      16. ↑ https://www.artofmanliness.com/skills/manly-know-how/how-to-care-for-leather/
      17. ↑ https://www.artofmanliness.com/skills/manly-know-how/how-to-care-for-leather/
      18. ↑ https://www.artofmanliness.com/skills/manly-know-how/how-to-care-for-leather/
      19. ↑ https://leatherdiscover.com/how-harden-leather/
      20. ↑ https://www.leathernaturally.org/wp-content/uploads/2023/02/LN_FactSheet_Ben_Why_use_Leather_.pdf
      21. ↑ https://leatherdiscover.com/how-harden-leather/
      22. ↑ https://www.artofmanliness.com/skills/manly-know-how/how-to-care-for-leather/
      23. ↑ https://leatherdiscover.com/how-harden-leather/
      24. ↑ https://www.mensjournal.com/pursuits/home-living/how-to-soften-leather
      25. ↑ http://www.silverquill.net/research/wax_hardening.html

      About This Article

      Article Summary X

      You can stiffen leather by soaking it in cool, then hot, water. First, submerge the leather in a bucket or sink of cool water for about 10 minutes. While it’s soaking, fill a large pot with water, and put it on the stove on high heat. Let the water heat to 180 degrees Fahrenheit or until it's too hot to touch. Then, transfer your leather to the hot water, and leave it for a few minutes. When you take it out, shape your leather if you need to, since the heat will make it flexible. Finally, leave it to dry for a few hours at room temperature, which should leave it stiff and thicker. For more tips, including how to stiffen your leather with wax, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 403,679 times.

      Reader Success Stories

      • Andrew Bowman

        May 28, 2019

        "I made a leather holster last night, but it's floppy. I'm going to test these methods on some scraps to ..." more
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement