PDF download Download Article PDF download Download Article

Condensation forming on the windows is a problem in many homes. But the condensation alone isn't the only issue, because this type of moisture buildup can lead to mold, wood rot, and other problems in the house too. The keys to preventing condensation are controlling the humidity and moisture levels in the house, managing the temperature and air flow inside, and keeping cold air away from your house.

Part 1
Part 1 of 3:

Reducing the Humidity Inside

PDF download Download Article
  1. A hygrometer is a device that measures moisture levels in the air. Since condensation forms when warm moisture in the air collects on a cold surface, such as a window, tracking the humidity level in your house can help you stop condensation. When the moisture levels in the house get too high, take steps to reduce the humidity.
    • When the temperature outside is below 0 F (-18 C), keep the humidity in your house between 15 and 25 percent.
    • When the temperature outside is between 0 and 40 F (-18 and 4 C), keep the humidity inside between 25 and 40 percent.
  2. One of the best ways to get humidity out of your house is to vent it outside through exhaust fans. Using exhaust fans is important in certain rooms and with certain appliances that produce moisture. [1]
    • Use bathroom vents and fans when you're bathing. Run them for at least 20 minutes after your shower.
    • Use kitchen and stove fans when you're cooking. Run them for about 15 minutes after you finish cooking.
    • Make sure your dryer vents to the outside for when you're doing laundry.
    • A gas fireplace must have a chimney that vents outside, and you should always keep the damper open when you're having a fire in a wood burning fireplace.
    Advertisement
  3. Indoor plants can be great in your home, but if you have trouble with condensation, you should keep them outside whenever possible. This is because plants produce moisture, so keeping them inside can exacerbate condensation issues.
    • If you have a sun room that stays dry, you can also keep your plants there.
  4. Another cause of excess moisture in the house is clothing that hasn’t been dried in a drier. If you must line dry your clothes, take them outside to prevent water from evaporating off the clothes and adding excess moisture to the air inside.
    • If you must line dry clothes inside, keep them in a well-ventilated room, and open a door or window. [2]
  5. Some of the most significant contributors to moisture in your home include showers/bathing and cooking. When you shower or bathe, close the door to the bathroom to keep steam and moisture from escaping into the rest of the house. When cooking, close doors to the kitchen to keep moisture contained.
    • When you are cooking or bathing in a closed off room, open windows to help remove the moisture. [3]
  6. Another great way to contain moisture when you're cooking is to use lids that will keep liquids inside the pans and pots. This is especially important when you're steaming and boiling food.
    • When you do remove the lid from your dishes, do so in front of an open window, and make sure the exhaust vent is running.
  7. Humidifiers are designed to add more moisture to the air in your house, so they will cause more condensation to form on your windows. When you're experiencing moisture problems, turn off all the humidifiers in your house, including ones that are attached to the furnace.
  8. On the other hand, dehumidifiers are designed to remove moisture from the air, so these are ideal devices if your home is prone to condensation. You can either install a whole-home dehumidifier, or invest in a portable one that you can move around the house. [4]
    • Empty the drip pan or basin on the dehumidifier regularly to prevent that moisture from evaporating back into the air.
  9. Advertisement
Part 2
Part 2 of 3:

Managing the Temperature

PDF download Download Article
  1. Managing the temperature inside your house is an important part of controlling condensation. Condensation can only form if there's a cold surface where the moisture can pool, so keeping windows and walls warm is essential. During the cooler months, use your furnace to increase the temperature, especially if humidity levels start to get too high.
    • Use a hygrometer to keep and eye on the humidity levels in your house. If the humidity levels start to exceed 50 percent, take steps to lower the humidity and increase the temperature until the humidity drops below 50 percent.
  2. This will prevent cold air from blowing in from outside and cooling walls and windows. Not only will weather stripping save you money on energy bills, but it will also stop condensation. [5]
    • Weather stripping is a protective strip that you can apply to doors and windows to prevent cold air from seeping in through joints and frames.
    • You might also want to install a storm window, especially if your windows are made of a single pane of glass. That will create a barrier between the outside of your house and the inside, which will help lessen moisture on the window. [6]
  3. Cracks and openings are another place where cold air can steal into your house. Around doors and windows, you can seal these with caulk to prevent walls and windows from cooling. [7]
    • To apply caulk, you'll need a caulking gun and a fresh bottle of caulk. After you apply the bead, smooth it down with a small knife or your finger to press the caulk into the hole.
  4. This is a heat exchanger with a built-in ventilation fan. These devices are expensive (a couple thousand dollars), but they will help reduce your energy costs by preventing energy loss. And because this device will increase the temperature of your house, it will help you fight condensation. [8]
  5. Another way to prevent condensation is to stop the windows from getting cold, and you can do this by installing storm windows, or by replacing older single-pane windows with double or triple glazing.
    • While replacing windows or installing storm windows may be expensive, it will also help to improve the energy efficiency of your home, so you'll save money on your power bills.
  6. Advertisement
Part 3
Part 3 of 3:

Improving Ventilation and Circulation

PDF download Download Article
  1. The final piece of the puzzle when it comes to reducing humidity in your home is improving ventilation and circulation. The easiest and cheapest way to improve the ventilation in your home is to open doors and windows when the weather permits. [9]
    • For the most effective ventilation, open windows on opposite sides of the same room to create a cross breeze.
  2. Opening drapes and curtains will allow air to circulate against the windows, and this will dry out moisture on the windows and stop condensation from forming.
    • The best time to open the windows and drapes is on sunny days, when the warmth and light from the sun will dry out moisture.
  3. Stand-up, oscillating, and ceiling fans are all great for circulating the air in your home. Not only will they help to reduce moisture, but they’ll also distribute hot air more evenly in the winter, and provide a cooling breeze in summer.
    • In summer, ceiling fans should rotate in a counterclockwise direction. In winter, switch the fans so they rotate in a clockwise direction, and circulate heat more efficiently. [10]
  4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What causes condensation in a double pane window?
    Michael Fox
    Window Repair Specialist
    Michael Fox is a Window Repair Specialist and the President at Window Repair Systems and WindowHardwareDirect.com, based in Westminster, South Carolina. With over 25 years of experience, Michael specializes in commercial window repair and service. He holds a business degree from Monroe Community College and SUNY Brockport. Michael has helped Window Repair Systems and WindowHardwareDirect.com become an industry leader in commercial window repair and hardware distribution, servicing schools and businesses and training large public school systems.
    Window Repair Specialist
    Expert Answer
    If you're getting condensation on a glass window, it usually means that the glass in between the panes of glass has failed. If that happens, you really need to replace that piece of glass.
  • Question
    How do I prevent condensation on a single pane window?
    Michael Fox
    Window Repair Specialist
    Michael Fox is a Window Repair Specialist and the President at Window Repair Systems and WindowHardwareDirect.com, based in Westminster, South Carolina. With over 25 years of experience, Michael specializes in commercial window repair and service. He holds a business degree from Monroe Community College and SUNY Brockport. Michael has helped Window Repair Systems and WindowHardwareDirect.com become an industry leader in commercial window repair and hardware distribution, servicing schools and businesses and training large public school systems.
    Window Repair Specialist
    Expert Answer
    If you're getting condensation on a single pane piece of glass, you should probably install a storm window. That will create a barrier between the outside, significantly lessening the moisture on the inside.
  • Question
    Why am I getting so much condensation inside my windows?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    Condensation is usually a sign that there’s too much moisture inside your home. It’s most likely to happen in winter or overnight when there’s a greater difference in temperature between the outside and the inside. Moisture from the warm air indoors condenses when it comes into contact with cold windows.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Article Summary X

      To stop condensation in rooms that produce moisture, like kitchens and bathrooms, make sure you use exhaust fans or open any available vents. After bathing or cooking, leave these vents and fans on for at least 15-20 minutes to lessen indoor humidity. Since condensation can only form if there is a cold surface for moisture to gather on, also consider weather stripping, caulking, or heat recovery ventilators to keep windows and walls warm. Of these methods, weather stripping is the fastest and easiest way to seal any leaks around windows and doors. To learn more about how to improve the circulation in your home, keep reading the article!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 722,567 times.

      Reader Success Stories

      • Mark Hutchins

        Oct 17, 2017

        "Gave me good ideas to reduce condensation on windows inside during winter cold nights. This article has a lot of ..." more
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement