PDF download Download Article PDF download Download Article

Are your TV speakers causing excess vibration or buzzing noise? This can be annoying and sound terrible. There are many reasons this may be happening as well as a few things you can do to stop this. This wikiHow article teaches you how to troubleshoot and solve excess TV sound vibration.

Things You Should Know

  • Make sure your TV and speakers are placed on a solid, sturdy surface, away from any walls, electronics, or vibrating objects.
  • Make sure you are using good quality cables and wires. Make sure they are securely connected and not worn, frayed, or damaged.
  • Check your sound settings to make sure the bass isn't too high. Also make sure you are using a reasonable volume.
1

Try restarting your TV and sound system.

PDF download Download Article
  1. Power both your TV and audio receiver or soundbar off and unplug them for about 20 seconds. Then plug them back in and see if the problem continues.
  2. Advertisement
2

Check the speaker placement.

PDF download Download Article
  1. Left and right speakers should be placed an equal distance away from the TV on both sides. The center speaker should be directly above or below the TV in the center. Any rear speakers should also be placed away from the walls. Subwoofers should be placed on the floor about 12 inches away from the wall.
3

Check the shelving, stand, or wall mounts for your speaker.

PDF download Download Article
  1. If the speakers are placed on a shelf, make sure there aren't any nearby objects that the speakers are causing the vibration.
    • Many wooden shelves use a cardboard back panel that can vibrate from noise. Pull the speakers away from the back of the shelf.
    • If you are using a subwoofer, make sure neither the speaker nor the airflow vent is pointed at anything that can vibrate.
    • Make sure your shelving, stands, or wall mounts are structurally sound. Make sure they are not wobbly, and that all screws, nuts, and bolts are securely fastened.
    • If your shelving or stands are wobbly, you can try applying some blu-tack or felt pads under the legs to stabilize them and dampen the sound. [1]
  2. Advertisement
4

Place a rug under your TV or stand.

PDF download Download Article
  1. Place a rug under your television, stand, or shelves to dampen the sound.
5

Turn down the bass.

PDF download Download Article
  1. Television speakers especially are not usually designed to handle a large amount of bass. Go into your television's sound settings and make sure the bass is below 50%. If the problem continues, try lowering it some more.
    • If you must have bass, you may want to invest in a decent soundbar or speaker system with a good subwoofer.
  2. Advertisement
6

Turn the volume down.

PDF download Download Article
  1. This is especially true for television speakers, which tend to not be the best quality. In general, you should keep your volume below 75%. If you cannot hear your TV at a lower volume, try turning off any other sound-making devices in the room. This can include fans, air conditioning, appliances, etc.
    • If you cannot hear your television even at low volumes, you may want to invest in a better-quality sound system with more speakers.
7

Soundproof the room.

PDF download Download Article
  1. If you don't have proper soundproofing materials , carpets, acoustic caulking, rugs, and thick blankets will also help dampen the sound. You can also add some bass traps in the corners of your rooms.
  2. Advertisement
8

Turn down the TV brightness.

PDF download Download Article
  1. Excessive TV brightness can cause the capacitors to overload and cause a whining sound. Go into your TV settings and make sure the brightness is set to below 50%. [2]
9

Check for electrical interference.

PDF download Download Article
  1. This can include appliances, lights, and other electronic devices. Try removing or unplugging any nearby electronic devices and see if the problem continues. [3]
  2. Advertisement
10

Secure all cables and wires.

PDF download Download Article
  1. Try using different HDMI ports and see if the problem is happening on all ports. Also, try using different cables. If you are using external speakers, make sure the speaker wires are secure on both the receiver end and the speaker end.
11

Use better-quality wires.

PDF download Download Article
  1. This also allows for more electronic interference. Inspect your wires to make sure they are not worn, frayed, or damaged. Try replacing your wires and cables with better quality wires and cables and see if this fixes the problem.
  2. Advertisement
12

Remove moisture from your TV panel.

PDF download Download Article
  1. Try removing the back panel of your TV and letting it sit for a while. You can also use a dehumidifier to dry out the excess moisture. Reattach your TV panel and see if the problem continues.
13

Consider replacing your speakers.

PDF download Download Article
  1. Luckily, you can easily replace your speakers with an inexpensive soundbar or speaker system.
    • If you notice your speakers are vibrating even with the volume is muted, this is usually a sign that your speakers are not working properly.
  2. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about fixing your tv, check out our in-depth interview with Adam Paris .

      About This Article

      Thanks to all authors for creating a page that has been read 50,159 times.

      Is this article up to date?

      Advertisement