How to Swap Hard Disk Drive Platters

PDF download Download Article
PDF download Download Article

This is an article regarding swapping hard drive platters. It may be best to try swapping the controller board before going to a platter swap. This is less destructive, and you require an identical drive for either process anyway.

Steps

PDF download Download Article
  1. You have tried everything else, your data is not extremely important, and/or your cash flow restricts the use of a professional service.
  2. You can not make a super clean environment at home but use some common sense, and do the best you can. Keep air flow to a minimum.
    Advertisement
  5. If you don't know what is, or how to do it, ask Google.
  6. If the cover doesn’t just lift off, look for more screws! There are screws under labels.
  7. If they are scratched, scorched, warped, or otherwise damaged, stop you are done!
  8. You can still try if you like.
  10. Make sure you can read and write data to and from it.
  12. This is your chance to learn how they are assembled, if you slip and damage parts you can get a new donor. NOTE: if you are dealing with multiple platters they cannot be removed without the proper equipment, because misalignment of the platters will destroy any chance of recovering data. You need a platter removal tool. The next steps are only if you are dealing with a single platter.
  14. Reassemble the donor drive with dead HDD’s platters inside (make sure all the platters are aligned in the same way towards each other as they were in the old drive).
  16. You might only get one or two chances to read from the HDD. It might make some horrible noises.
  17. Continued use of the HDD is ill-advised.
    18. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How about speed 5400 or 7200?
    Community Answer
    That is how fast your hard drive is. If it's 5400 it won't be able to read and write files as fast as a 7200.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 7 Helpful 14
  • Question
    Do the WWN, DCM, DCX, and model number all have to match to swap hard drive disks?
    Community Answer
    Yes, this is ideal. It's unlikely to work without all of these matching up.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 8
  • Question
    Is there any problem if the new hard drive's storage is less than the old one?
    Community Answer
    The drive only needs to be big enough to hold your operating system, but if the new drive is smaller, you'll have less room for your own data files. For old fashioned hard drives, the highest storage sizes (like 4 TB, terabyte) qualify as "new technology" and tend to be less reliable than smaller drives (like 1 TB). Today, there's no reliable drive, whether old technology or new SSD (solid state drives). There used to be high reliability drives, so the consumer is being played for a fool. Back up your data onto a few different external devices, then you can keep your new, little drive from filling up. Hard drives start misbehaving when they're more than 2/3 full.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 25 Helpful 14
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • This will void any existing warranty.
        Thanks
        Helpful 8 Not Helpful 5
      • Hard Drives are assembled in hermetically-sealed clean rooms, free of any dust. A single speck of foreign material introduced onto a platter will destroy the drive most of the time. If this does happen, try a can of air and spray it off, but do not wipe or use chemicals.
        Thanks
        Helpful 7 Not Helpful 8
      • In most cases, this will also void your ENTIRE computers warranty, read the warranty very carefully
        Thanks
        Helpful 2 Not Helpful 7
      Advertisement

      You Might Also Like

      How to
      Recover a Dead Hard Disk
      How to
      Check if a Hard Drive is an SSD or HDD on a Windows PC
      How to
      Install a Hard Drive: HDD, SSD, and M.2
      How to
      Clean Drive C for More Space
      How to
      Reformat an External Hard Drive on Windows or Mac
      How to
      Destroy a Hard Drive
      How to
      Check Free Hard Disc Space on PCs, Macs, iPhones & Androids
      How to
      Recover Data from the Hard Drive of a Dead Laptop
      How to
      Remove a Hard Drive
      How to
      Tell if a USB Cable Supports Hi Speed & Fast Charging
      How to
      Open a Seagate External Hard Drive
      How to
      Find out the Size of a Hard Drive
      How to
      Convert an Internal Hard Drive to External Via HD Enclosure
      How to
      Unpartition a Hard Drive
      Advertisement

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 485,828 times.

      Is this article up to date?

      Advertisement