How to Test a Smoke Alarm (Plus Other Fire Safety Tips)

PDF download Download Article
Keep your family safe by testing your smoke detectors regularly
PDF download Download Article

Having a working smoke detector is extremely important to keep your family safe in the case of a fire. Make sure your smoke alarm is functioning properly by testing it at least once a month and replacing it every 10 years. We interviewed firefighter David Decker to teach you everything you need to know about how to test a smoke detector, how often to test and replace it, and how to clean it. Plus, learn where to install smoke alarms and how to practice fire safety in your home.

Testing a Smoke Alarm

Press and hold the test button on your smoke detector for a few seconds. If the alarm sounds, the detector is working. If it doesn’t, replace the batteries or check the wiring for damage. Then, test the sensors by spraying a smoke detector tester spray around the device. Repeat these steps at least once a month.

Section 1 of 6:

How to Test a Smoke Detector

PDF download Download Article
  1. Unless you are trying to conduct a fire drill, let everyone in the home know that you will be testing the smoke detector so that they will not feel frightened when the detector goes off. [1]
    • If your smoke detector is hardwired to a monitored security system, be sure to notify the security system's company that you are performing a test before you test the alarm. You don't want the fire department showing up at your door!
  2. When testing an alarm, it will sound loud to you because you’re standing directly underneath it. However, it’s important to make sure that your detector is loud enough that anyone in your home can hear it, as it needs to be loud enough to wake even the deepest sleeper in the household. Ask someone to stand in the room farthest from the detector or outside the house to make sure it’s audible. [2]
    • Wear ear protection when you test the smoke alarm. It's very loud, and you will be right next to it when you test it.
    Advertisement
  3. While many smoke detectors are equipped with a light that indicates the unit is receiving power, it’s important to actually test the alarm to make sure it will sound properly. Push and hold the test button on the front of the alarm for a few seconds. If it’s working properly, the alarm will sound, typically as a very loud, ear-splitting siren or repeated beeping. [3]
    • If the alarm doesn’t sound when you press the test button or makes low, erratic sounds, the detector isn’t receiving power properly. For battery-operated smoke detectors, replace the batteries and try again. If it still doesn’t work, it may be time to replace the detector.
    • If your detector is hardwired and the alarm doesn’t sound properly, call an electrician to check the wiring.
    • If you can’t reach your alarm to push the button on your own, stand on a chair or ladder or use a broom handle to push the button.
    • Some smoke alarms go into a "programming mode" if you hold the button for more than a second or two. If that happens, wait a minute for it to return to normal, and then press the test button briefly.
  4. Some smoke detectors will turn off on their own a few seconds after you test the alarm. If your detector doesn't turn off automatically, push the test button again. If the alarm continues to sound after this, there may be an issue with the batteries or wiring. Try replacing the batteries or calling your local fire department for assistance. [4]
  5. In addition to making sure that the unit is receiving power, ensure that the detector’s smoke sensor is working correctly, too. Purchase an smoke detector tester spray and spray it towards the alarm according to the instructions on the can. The alarm should sound after a few seconds. If it doesn’t, the sensor may be worn out, in which case you’ll need to replace your detector immediately. [5]
    • Purchase these aerosol sprays for a few dollars in a hardware or home improvement store or online.
    • To turn off the alarm after testing, use a small hand-held vacuum to suck the test material away from the detector. Some detectors may also have a “silence” button that you can push to stop the alarm. Avoid waiting for the detector to turn off on its own, as this may drain the battery.
  6. While some people may attempt to test their smoke detector by holding a candle or matches near it, most manufacturers specifically warn against using actual smoke to test smoke alarms. It is not only unnecessary and dangerous, but it can melt or damage the detector and contaminate the sensors, making them less sensitive to actual smoke in the future.. [6]
    7. Advertisement
Section 2 of 6:

How Often to Test a Smoke Detector

PDF download Download Article
  1. Working smoke detectors are extremely important for keeping your family safe, so it’s important to test them regularly. Some even recommend testing your detectors each week. If you can’t, then be sure to plan a time each month to check each smoke detector. [7]
    • Checking your alarm regularly means you are more likely to catch a malfunctioning detector quickly; thus, you are more likely to have a properly functioning detector when you need it.
    • To efficiently check all the alarms in your house, set aside 30 minutes to an hour at least once a month to check them all at once rather than at different intervals.
    • Most manufacturers recommend testing the detector every week or two. The push button test is sufficient for this. Use the aerosol test gas once per year to ensure proper airflow into the detector unless otherwise recommended by the manufacturers.
Section 3 of 6:

When to Replace a Smoke Detector

PDF download Download Article
  1. Smoke detectors can last about 10 years before they may become unreliable. Over time, the sensors in the detector may wear out or become contaminated by dust and other pollutants. Even if your alarm seems to be functioning properly, replace it after 10 years of use. [8]
    • If you aren’t sure how old your smoke detector is, you can usually find out by removing the unit from the ceiling and looking on the back. The date of manufacture is typically printed on it. If you can’t find the date on the unit, then replace it to be safe.
    • Some smoke alarms now incorporate automatic warnings when they have reached the end of their useful life—typically chirping, similar to a weak battery warning, but with other indications as well. Replace such units immediately, even if they aren’t yet 10 years old.
    • If your smoke detectors are hardwired, be sure to shut off the electricity in your home before installing a new one, as wires could come loose and create an electrical danger. Alternatively, have a professional electrician install the unit for your own safety.
    • Laws in your jurisdiction probably specify how one must dispose of outdated and unreliable smoke detectors. Check the rules that apply in your area, and dispose of old and unreliable detectors properly.
  2. If you have a battery-powered detector, it is a good idea to replace the batteries up to two times per year, even if the detector is functioning properly. Regular battery changes help to ensure that your detector is ready to go if and when you need it. [9]
    • If you have a battery-operated alarm, test it immediately after installing new batteries to make sure it is functioning.
    • Resist the temptation to take the batteries out of your smoke detector when the batteries in your TV remote run out. People often do this and then forget to replace the detector batteries.
    • Recycle old batteries appropriately . Never dispose of old batteries in the household trash unless they are regular alkaline, manganese, and carbon-zinc batteries, which are not considered "hazardous waste."
    • Decker suggests changing the batteries whenever you change your clocks for daylight savings time: “Typically, the motto is ‘Change your clocks, change your batteries.’ So, whenever there [is] a time change for daylight savings time, you want to change your battery, and that ensures that your smoke detector is going to be working correctly.”
    3. Advertisement
Section 4 of 6:

How to Clean a Smoke Detector

PDF download Download Article
  1. Follow your smoke detector’s manufacturer's guide to find out how to clean the unit properly. In general, though, remove the face of the detector and use a soft brush vacuum cleaner attachment to gently brush and vacuum the inside of the detector. Wipe down the outside of the unit with a clean cloth or wipe to remove buildup. Make sure to clean the vent openings to make sure airflow isn’t obstructed. [10]
    • If you have the time, it’s a good idea to clean your smoke detector when you test it each month. If not, once every 6 months should keep it in working order.
    • In the event of a fire, buildup on the detector could cause it to malfunction.
    • Don’t use cleaners on the unit, as these may contaminate the sensors. Vacuuming or wiping away dust should be sufficient.
Section 5 of 6:

Where to Install Smoke Detectors

PDF download Download Article
  1. Unless you live in a small, one-room studio apartment, having one smoke detector will likely not be enough to keep you safe. Make sure to install detectors on every level of your house, including your attic and basement, if you have them. This way, you’ll be more protected no matter where the fire starts. [11]
    • To install a smoke alarm, screw the mounting base onto the ceiling or wall, place the smoke alarm into position, and twist it in, tightening it with a screwdriver as needed. Remember to put the batteries in!
    • If possible, make sure your smoke detectors are interconnected, meaning if one goes off, they’ll all go off. This step is one of the best ways to alert your family and keep everyone safe, regardless of where they are in the house.
    • Be aware that some smoke alarms are not designed for use at "low temperatures" that may be found in an attic.
    • When installing smoke detectors in the basement, place them on the ceiling at the bottom of the stairs.
  2. Your smoke detectors must wake everyone in the house, so place them in every bedroom and sleeping area as well as right outside of each sleeping area. The gases emitted by a fire can cause heavier sleeping, so installing alarms in these areas can save lives. [12]
    • On levels without bedrooms, install smoke detectors in the living room and near the stairway leading to the upper level.
    • This includes any areas where pets sleep, as well. If you keep animals in a barn or another building outside of your home, make sure the smoke detectors are installed somewhere you can hear them.
  3. Smoke rises, so smoke detectors should be installed as high as possible in each room. Installing on the ceiling is best, and wall-mounted smoke alarms should be no more than 12 in (30 cm) from the ceiling. [13]
    • If the room has a slanted ceiling, install the smoke alarm on the high side.
  4. If your smoke detector is too close to a cooking appliance, it could cause false alarms when cooking, which is not only annoying and inconvenient but can sometimes contaminate the alarm. For this reason, ensure that your smoke detectors are installed at least 10 ft away from all cooking appliances. [14]
  5. Decker says, “It is typical to not place [smoke detectors] where fresh air would prevent smoke from getting to the smoke [sensor] and causing it to trip.” Doors, windows, and ducts may have drafts or air movement, which could prevent the alarm from properly detecting smoke. Smoke detectors should be installed at least 3 ft (0.9 m) away from these areas. [15]
    • This includes doors to the kitchen or a bathroom with a tub or shower.
    6. Advertisement
Section 6 of 6:

How to Practice Fire Safety

PDF download Download Article
  1. Everyone must know what to do in the event of a fire. Have everyone sit down together with a floor plan of your home and create a fire exit plan that everyone will be able to use in the event of a fire. Make sure that all members of the household have memorized the emergency number for the fire department. [16]
    • Have at least two working escape routes out of every room. If you have a second floor, consider getting a life safety ladder that can hang from your windows.
    • Include a meeting point outside of the home where everyone will go in the event of a fire. For example, to the neighbor’s driveway. Mark this location on your escape plan.
    • Assign one person who will be responsible for helping anyone who would not be able to get out of the home on their own, like a baby, young toddler, or elderly family member.
    • If you have young children, post the fire exit plan in their room to help them remember what the plan is. Make sure visitors know about your escape plans.
  2. Have every family member practice the exit routes from each room at least once or twice a year. This way, everyone will know what to do in the event of a fire, and it will be less likely that someone will panic and forget the plan. Instruct each member of the household on what to do if they notice a fire, and adjust your plan as needed if it seems like it isn’t efficient. [17]
    • For example, if someone notices a fire, they should yell or pound on the walls to alert other members of the household.
    • Instruct family members to feel doors before opening them. If the door is hot, they should use an alternative route as specified in the fire exit plan.
    • Explain that if there is heavy smoke, household members should crawl on the floor to avoid the heat and to reduce smoke inhalation.
  3. Inspect each door and window in your home. Are there objects that would make it difficult to get out of these exits in the event of a fire? If a fire happens, it’s important to have as many ways to get out as possible. If there are pieces of furniture or other objects that block doors or windows, move them to a safer location. [18]
    • For example, don’t allow a tall, heavy dresser to block the window. If a fire happens, you or your loved one may not be strong enough to push it out of the way in time.
  4. Conduct a fire drill at least twice a year to make sure your family is prepared. Don’t tell anyone that you are setting off the alarm so that it will be treated like the real thing rather than as a drill. This approach allows you to see how everyone would react in the result of a real fire so you can make any needed adjustments to your plan. [19]
    • Try to do this when everyone is home.
    • Everyone should understand that they are not to try to bring their belongings with them. Once they have exited the home, no one is to re-enter under any circumstances unless officially authorized.
  5. House fires are more likely to start in the kitchen than in any other room. To help prevent this, have a fire extinguisher on hand and make sure everyone in your household knows how to use it properly. Contact your local fire department for tips on fire extinguisher maintenance and use. [20]
    • When you’re cooking, stay in the kitchen so you can keep an eye on things, and turn off the stove if you need to leave the room for whatever reason, even just for a short period of time.
    • In addition to cooking fires, Decker also says laundry fires are common: “I would say probably most often that is due to lint buildup. Empty [the] lint before each load because the buildup of lint builds up the heat and then the heat makes the lint catch on fire.”
  6. To prevent electrical fires, examine all cords, plugs, and wires in your home. Replace any frayed extension cords, exposed wires, or loose plugs. Ensure that all outlets have cover plates and no exposed wiring and that wiring is not under rugs, attached by nails, or in high-traffic areas. Avoid overloading outlets and extension cords, as well. [21]
  7. Decker says sleeping with your bedroom door closed can drastically improve your chances of escaping and surviving a fire because “the smoke doesn’t make it into your bedroom as easily.” It also slows the spread of flames and prevents deadly gases from filling your room. [22]
    8. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If your detector is emitting a short chirping sound, it means the batteries need to be replaced or that the unit has reached its "end of useful lifetime" and the entire unit needs to be replaced.
        Thanks
        Helpful 0 Not Helpful 0
      • If you move into a home with existing smoke detectors of an unknown age, look at the manufacturer's label on the back of the device. It might display a date of manufacture, and you can use that date to calculate the device's age. If you cannot find a date of manufacture, replace the unit with a new one as soon as possible.
        Thanks
        Helpful 0 Not Helpful 0
      • If you are doing any projects or renovations that will create dust, try covering your fire alarm with a plastic bag and elastic band until you are finished. The bag will prevent dust from getting inside. Remember to take it off when you are done. Hang a long ribbon from the elastic as a reminder.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Do not use candles or incense to test a smoke detector. The smoke produced by candles and incense may contain waxy or oily particles that can contaminate the sensor and reduce its sensitivity.
        Thanks
        Helpful 7 Not Helpful 1
      • Never decorate any part of a smoke alarm (including the outer cover) with paint, stickers, hanging objects, etc. Decorations like these can impair function.
        Thanks
        Helpful 0 Not Helpful 0
      • The test button on very old units only tests the power connectivity of the unit and the operation of the siren. Newer models incorporate sensor-testing techniques as well.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Change the Batteries in Your Smoke Detector
      How to
      Keep Safe During a House Fire
      An Easy Guide for Operating a Fire Extinguisher
      How to
      Burn Paper Safely
      How to
      Cover a Fire Alarm Temporarily
      How to
      Remove a Cigarette Lighter Socket
      How to
      Replace Smoke Detectors
      8 Common Reasons Your Smoke Alarm Goes Off Without Smoke
      How to
      Dispose of Smoke Detectors
      How to
      Dispose of Burnt Firewood and Ash Safely
      How to
      Dispose of Fireworks
      How to
      Prevent a Kitchen Fire
      Advertisement

      References

      1. ↑ https://porch.com/advice/how-to-test-your-smoke-detector
      2. ↑ https://porch.com/advice/how-to-test-your-smoke-detector
      3. ↑ https://www.getprepared.gc.ca/cnt/rsrcs/sfttps/tp201011-en.aspx
      4. ↑ https://www.nfpa.org/news-blogs-and-articles/blogs/2022/02/11/smoke-alarm-smoke-detector-troubleshooting
      5. ↑ https://cdn.thefirepanel.com/docs/simplex/Simplex%20-%20Smoke%20Detector%20Tester%20Operating%20Instructions.pdf
      6. ↑ https://www.phoenix.gov/fire/safety-information/fire-safety/alarms#:~:text=Test%20your%20smoke%20alarms%20at,that%20the%20battery%20is%20low .
      7. ↑ https://www.fire.qld.gov.au/sites/default/files/2021-05/SmokeAlarmMaintenanceReplacement.pdf
      8. ↑ https://www.fire.qld.gov.au/sites/default/files/2021-05/SmokeAlarmMaintenanceReplacement.pdf
      9. ↑ https://www.qfes.qld.gov.au/sites/default/files/2021-05/SmokeAlarmMaintenanceReplacement.pdf
      1. ↑ https://www.fire.nsw.gov.au/page.php?id=444
      2. ↑ https://www.redcross.org/get-help/how-to-prepare-for-emergencies/types-of-emergencies/fire/fire-safety-equipment.html#smoke-alarms
      3. ↑ https://www.redcross.org/get-help/how-to-prepare-for-emergencies/types-of-emergencies/fire/fire-safety-equipment.html#smoke-alarms
      4. ↑ https://www.nfpa.org/education-and-research/home-fire-safety/smoke-alarms/installing-and-maintaining-smoke-alarms
      5. ↑ https://www.nfpa.org/education-and-research/home-fire-safety/smoke-alarms/installing-and-maintaining-smoke-alarms
      6. ↑ https://lafayette.in.gov/761/Location-of-Smoke-Detectors#:~:text=This%20means%20they%20should%20be,bathroom%20with%20tub%20or%20shower .
      7. ↑ https://www.redcross.org/get-help/how-to-prepare-for-emergencies/types-of-emergencies/fire/home-fire-preparedness.html
      8. ↑ https://www.redcross.org/get-help/how-to-prepare-for-emergencies/types-of-emergencies/fire/home-fire-preparedness.html
      9. ↑ https://www.usfa.fema.gov/prevention/home-fires/prepare-for-fire/home-fire-escape-plans/?_gl=1*1jdskw9*_ga*MTQ3MDk1NDA3LjE3MDc3NTY2Nzk.*_ga_KBPD43V3RV*MTcwOTEzODY3Ni4xLjAuMTcwOTEzODY3Ni4wLjAuMA ..
      10. ↑ https://www.redcross.org/get-help/how-to-prepare-for-emergencies/types-of-emergencies/fire/home-fire-preparedness.html
      11. ↑ https://www.ready.gov/home-fires
      12. ↑ https://www.redcross.org/get-help/how-to-prepare-for-emergencies/types-of-emergencies/fire/home-fire-preparedness.html
      13. ↑ https://fire.lacounty.gov/cbyd/

      About This Article

      Article Summary X

      If you want to test a smoke detector, find the test button on the front or side of the unit. Push and hold the button for a few seconds to ensure the alarm sounds. If it doesn’t, you may need to replace the batteries or have an electrician check the wiring in the detector. If you want to test the smoke sensor, purchase canned smoke and spray the smoke at the detector, being sure to follow the instructions on the container. Keep reading for tips from our reviewer on how often you should test your smoke detector!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 383,001 times.

      Reader Success Stories

      • David Musquiz

        Feb 8, 2018

        "My tenants wanted some extra assurance that detectors were working. I did both the suggested aerosol spray and ..." more
        Rated this article:
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement