How to Test an Outlet with a Multimeter

PDF download Download Article
PDF download Download Article

Electricians and engineers regularly use multimeters to check the voltage of circuits. However, these handy tools are now widely available and affordable enough for anyone to buy one. You might want to use a multimeter to check the voltage of an outlet and ensure that the casing is safe. To test an outlet with a multimeter, read the instructions that came with your device first and be careful not to touch the metal prongs. If you do, you could be electrocuted. The process of checking an outlet’s voltage is quick and easy, and you can also check the casing of an outlet to make sure it’s safe.

Method 1
Method 1 of 2:

Checking the Voltage of an Outlet’s Sockets

PDF download Download Article
  1. Even if you’ve used a multimeter before, the instructions of different models can vary and it’s important to read them to keep yourself safe. Read the instructions that came with your multimeter and check for specific information on how to safely test an outlet with the device. [1]
    • It’s especially important to make sure that the multimeter is capable of testing the voltage of the outlet. If the voltage is too high for the multimeter to measure, you may break it by trying to measure it.
  2. AC stands for alternating current and it is usually represented by an A with a squiggly line beside or above it, such as ~A or A~. [2] Locate the power switch on the multimeter and switch it on. Then, turn the dial on the front of the multimeter to the AC setting. The dial may be clearly marked to indicate what the AC setting is, or you might need to check the manual if it uses symbols. [3]
    • Check your multimeter’s manual if you are unsure of how to turn it on.
    Advertisement
  3. The multimeter should have 2 prongs, one red and one black. Insert 1 of them into the left side of the outlet and the other into the right side of the outlet. [4]
    • Even though the prongs are different colors, it doesn’t matter which one you put into each side of the outlet. The colors only matter for testing circuits and other types of electrical currents. [5]

    Warning : Hold the prongs by the insulated parts only. Do not touch the metal parts or you may electrocute yourself! [6]

  4. Once the prongs are in place, look at the front of the multimeter. If it’s a digital multimeter , the number will be displayed clearly on the screen. If it’s an analog multimeter, look at where the needle is pointing to get the reading. [7]
    • A typical reading for a household outlet in the United States is 120 volts. However, if it’s lower or higher, the outlet may be malfunctioning.
    • Pull the prongs out of the outlet and switch off the multimeter after you’re done checking the outlet.
    Mike Holt, Residential Wiring Specialist

    Testing outlets with a multimeter is a crucial safety step before any electrical work. Set the device to AC voltage mode and insert the leads correctly, with one prong in the hot slot and one in neutral. A normal reading is 110-120 volts. Abnormal readings indicate a wiring issue that must be addressed before proceeding, potentially preventing electrocution or fire.

    5. Advertisement
Method 2
Method 2 of 2:

Ensuring that the Casing is Grounded

PDF download Download Article
  1. AC stands for alternating current and this setting measures the volts that an outlet is putting out. Find the power switch on your multimeter and switch it on. Then, locate the dial on the front of the multimeter and turn it to the AC setting. The dial may be marked to indicate the AC setting, such as with an A followed by a squiggly line. [8]
    • Look at your multimeter’s instruction manual if you are not sure how to turn it on or select the AC setting.
  2. To ensure that no electricity is reaching the outside of your outlet, hold the black prong by the insulated part. Then, press the metal tip of the prong against a screw or another piece of metal on the outlet fixture. [9]
    • Do not touch the metal prong at any point while you’re doing this!
  3. Next, hold the red prong by the insulated part and insert the metal prong into the bottom hole of the outlet. This hole is round with 1 flat edge. If the hole is grounded as it should be, no electricity should come out of it. [10]

    Tip : If you want, you can also check the left side of the socket while pressing the black prong against a screw. No electricity should come out of the left slot of your socket either. Only the right side of the socket should have an electrical current.

  4. Once the red prong and the black prong are in place, look at the screen or analog dial on your multimeter. The reading should be 0 or 0.001 volts. This indicates that no electricity is reaching the outside of the outlet and it is well grounded. If the number is higher than this, the casing is a potential electrocution hazard. Call an electrician for assistance. [11]
    • Remove the prongs from the outlet and switch off the multimeter when you’re done.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Why are polyethylene outdoor Ethernet cables more resistant to damage from extreme temperatures than regular Ethernet cables?
    Ricardo Mitchell
    Electrician & Construction Professional, CN Coterie
    Ricardo Mitchell is the CEO of CN Coterie, a fully licensed and insured Lead EPA (Environmental Protection Agency) Certified construction company located in Manhattan, New York. CN Coterie specializes in full home renovation, electrical, plumbing, carpentry, cabinetry, furniture restoration, OATH/ECB (Office of Administrative Trials and Hearings/Environmental Control Board) violations removal, and DOB (Department of Buildings) violations removal. Ricardo has over 10 years of electrical and construction experience and his partners have over 30 years of relevant experience.
    Ricardo Mitchell
    Electrician & Construction Professional, CN Coterie
    Expert Answer
    Well, the polyethylene cables are designed to be used outside, so they're better at withstanding extreme weather and temperatures. The polyethylene is just a tougher material than the stuff they normally use to make Ethernet cables.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 3
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Hold the prongs on the multimeter by the insulated parts only. Do not touch the metal parts or you may electrocute yourself!
        Thanks
        Helpful 3 Not Helpful 1
      • Although multimeters are easy to use, it’s important to exercise caution when using your multimeter. Using it improperly may lead to injury or damage the multimeter. [14]
        Thanks
        Helpful 0 Not Helpful 1
      Advertisement

      You Might Also Like

      Identifying Positive & Negative Wires: Colors & Power Types
      How to
      Test a Fuse With a Multimeter
      How to
      Solder Wires Together
      How to
      Strip Wire with or without a Wire Stripper
      How Do 15A and 20A Outlets Differ? What You Should Know
      How to
      Run Electrical Wires through Finished Walls
      How to
      Install a Circuit Breaker
      How to
      Find the Fuse Box or Circuit Breaker Box
      How to
      Gauge Wire
      How to
      Determine Amperage of Circuit Breaker
      How to
      Straighten a Wire
      How to
      Change a Circuit Breaker
      How to
      Wire a GFCI Receptacle
      How to
      Find and Trace Electrical Wires in Walls
      Advertisement

      References

      1. ↑ https://www.bobvila.com/articles/how-to-use-a-multimeter/
      2. ↑ https://sciencing.com/read-multimeter-settings-8563799.html
      3. ↑ https://www.youtube.com/watch?v=cXlVVgsp64c&feature=youtu.be&t=30
      4. ↑ https://www.youtube.com/watch?v=cXlVVgsp64c&feature=youtu.be&t=65
      5. ↑ https://www.bobvila.com/articles/how-to-use-a-multimeter/
      6. ↑ https://www.bobvila.com/articles/how-to-use-a-multimeter/
      7. ↑ https://www.youtube.com/watch?v=cXlVVgsp64c&feature=youtu.be&t=72
      8. ↑ https://www.youtube.com/watch?v=cXlVVgsp64c&feature=youtu.be&t=30
      9. ↑ https://www.youtube.com/watch?v=cXlVVgsp64c&feature=youtu.be&t=105
      1. ↑ https://www.youtube.com/watch?v=cXlVVgsp64c&feature=youtu.be&t=111
      2. ↑ https://www.youtube.com/watch?v=cXlVVgsp64c&feature=youtu.be&t=115
      3. ↑ Ricardo Mitchell. Electrician & Construction Professional, CN Coterie. Expert Interview. 6 May 2020.
      4. ↑ https://www.familyhandyman.com/electrical/how-to-use-a-multimeter/
      5. ↑ https://www.familyhandyman.com/electrical/how-to-use-a-multimeter/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 189,212 times.

      Did this article help you?

      Advertisement