How to Tune a Five String (American) Banjo

The 5-string banjo is a bright-sounding instrument that’s similar to the guitar in its structure and sound. When you tune your 5-string banjo, you’ll tune it to a style called “open G.” This means that, if you strum the instrument without putting your fingers on the frets, it will play a G chord. Tune the instrument by adjusting the tuning knobs until each string plays the correct pitch and is neither sharp nor flat. [1]

Part 1
Part 1 of 2:

Finding a Tuner and Preparing Your Banjo

  1. The first few times you tune a banjo, it’ll help you to hear the individual pitches played by a tuner. The easiest tool to use is a mechanical “tuner” that tells you when you are above or beneath a certain pitch. Most electronic tuners have a digital arrow that points toward “sharp” or “flat” depending on the pitch of each string. [2]
    • You can purchase a tuner at most music-supply stores, or through online music retailers.
  2. If you’d rather not pay money for a tuner at a music store, you can find a variety of free tuners online. The disadvantage to using an online tuner is that it will be difficult to tune your banjo when you’re not at your computer or are out of the range of wi-fi.
    Advertisement
  3. You’ll strike the following keys to play the pitches needed for banjo strings: G4, C3, G3, B3, D4. If you don’t have internet access, you can tune your banjo with many physical tools too. If you don’t have one, though, a pitch-pipe or any other fixed pitch instrument will do.
    • In a pinch, even a less common instrument like an accordion can give you the pitches you need. All you need is a constant, even pitch to tune to.
  4. Hold the “neck” (the long, narrow part with the strings) in your left hand, with the round part across your stomach. Then use a tape measure to measure the distance from the inside of the nut to the 12th fret. Then measure from the 12th fret down to the banjo bridge. Adjust the bridge until the distances are the same. [3]
    • So, if you measure 21 inches (53 cm) from the nut to the 12th fret, move the bridge until it’s also 21 inches (53 cm) from the nut.
    • The “nut” of a banjo is the small strip of plastic at the far end of the neck through which all 5 of the strings pass. The nut connects the neck to the peghead (the wooden section to which the tuning pegs are attached).
    Advertisement
Part 2
Part 2 of 2:

Tuning the Instrument with a Tuner

  1. Look at the five strings at the bottom, and find the center string. This is the first one to tune. Follow the middle string to the top of the banjo, and find its corresponding tuning knob. [4] Tighten or loosen the knob and pluck the string as you do so, until it is tuned perfectly to G3. [5]
    • This pitch is called G3. Each octave on a keyboard is assigned a number, and middle C is referred to as C4. So, the G below C4 is G3.
  2. This string will technically be the 4th from the top. Trace the string up to the banjo’s tuning pegs to find which peg adjusts the string. Pluck the string and keep a close eye on the electronic tuner. Tighten the string to raise the pitch and loosen the string to lower the pitch. Continue adjusting until the pitch is in tune. [6]
  3. Continue tuning the strings as you move down the banjo’s neck. The final string in that direction is very thin. Tune it to D4. [7] As with the other strings, strum the string and watch the intonation indicator. Tighten or loosen the tuning knob until the string plays a D4.
    • This pitch will be higher than the other strings you’ve already tuned. Unlike a guitar, the strings on a banjo do not progress from lower to higher as you move down the neck.
  4. You’ll notice that the string at the top of the banjo neck does not run all the way up to the top of the fretboard with the rest. Instead, it stops short and its tuning knob is located in the middle of the neck. Tune this by plucking at the string and watching the intonation indicator. The string is in tune when it produces a steady G4. [8]
    • This strange “5th string” placement is unique to the banjo and gives the instrument a unique “roll” and “bounce” to its sound.
    • Keep this string placement in mind throughout the tuning process. Otherwise you may get confused and turn the wrong knob to tighten this string. Because of the 5th string placement, the second string your hand plucks (the D string) will in fact be the first string on the tuning board.
    • Follow the strings from bottom to top, and you’ll understand.
  5. This is the only string you haven’t tuned so far, and it’s also the thickest of the 5. This gets tuned to a low D: D3, specifically. As with the other 4 strings, pluck at the string every 1-2 seconds, tweaking the tuning knob to raise or lower the pitch as needed. [9]
    • If you have a good ear, you’ll notice that this string is a full octave above the bottom string on the banjo neck, which you’ve tuned to D4.
  6. Once you get an ear for how a tuned banjo should sound, you can start tuning each string in relation to the other. You’ll be able to tell from the intervals between notes if the banjo is in tune. It’s best to start from the G string, and then to tune B, D, and high G, each off of the string before. [10]
    • Use a tuner or a piano to make sure that the G string’s in tune first, if you want to play with anyone else!
    Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I measure the bridge position?
    Jacob McCourt
    Community Answer
    Take a long ruler and measure the scale length from the front of the nut (or middle of the zero-fret) and position the middle of the saddles at this point. The bridge is then located centered to the fingerboard with its front parallel to the frets and screwed on.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    How do I put strings on my banjo?
    Community Answer
    Search that question on YouTube. There are many videos demonstrating exactly how to do it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit

      Advertisement

      Tips

      • There are a number of different types of banjos, but the 5-string is the most popular version. It’s typically associated with folk and bluegrass music.
        Thanks
        Helpful 0 Not Helpful 0
      • The G-string is the easiest string to tune to. You can, of course, tune the banjo to any of its other strings as well.
        Thanks
        Helpful 0 Not Helpful 0
      • If you’re having a tough time finding the right pitch for each string, try using an online guide. Search for “Tune Banjo” on YouTube.com.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Warnings

      • Tighten the banjo strings slowly so you don’t over-tighten them. Strings, if broken, carry tremendous energy that will whip them in all directions. A flying string could injure your eyes.
        Thanks
        Helpful 1 Not Helpful 0
      • Again, remember that short string! Otherwise you may get confused by the fact that there are 5 strings on the bottom of the banjo and only 4 tuning pegs on the top.
        Thanks
        Helpful 1 Not Helpful 0
      Advertisement

      Other wikiHows

      How to
      Choose the Perfect Tamagotchi
      How to
      Turtle
      How to
      Draw a Barn Using Freehand Perspective
      How to
      Make Aleppo Soap
      How to
      Make a Clay Magnet
      How to
      Panel a Wall
      How to
      Find Shark Teeth
      How to
      Crochet a Bikini Bottom
      How to
      Buy Reborn Babies
      How to
      Crochet a Beanie
      How to
      Crochet an Amigurumi Toy
      How to
      Dress for an 8th Grade Formal
      How to
      Choose Exterior Paint Colors for Your House
      How to
      Make a Beaded Flower
      Advertisement

      References

      1. ↑ http://www.ezfolk.com/banjo/Tutorials/G_Tuning/g_tuning.html
      2. ↑ https://nativeground.com/how-to-tune-a-banjo/
      3. ↑ https://youtu.be/nlUX6Q-ecpg?t=43s
      4. ↑ http://www.ezfolk.com/banjo/Tutorials/G_Tuning/g_tuning.html
      5. ↑ https://youtu.be/nlUX6Q-ecpg?t=2m40s
      6. ↑ https://youtu.be/nlUX6Q-ecpg?t=3m13s
      7. ↑ https://youtu.be/nlUX6Q-ecpg?t=3m8s
      8. ↑ https://youtu.be/nlUX6Q-ecpg?t=3m31s
      9. ↑ https://youtu.be/nlUX6Q-ecpg?t=3m26s
      1. ↑ http://www.ezfolk.com/banjo/Tutorials/G_Tuning/g_tuning.html

      About this article

      Thanks to all authors for creating a page that has been read 62,960 times.

      Did this article help you?

      Advertisement