How to Unblur an Image with Photoshop, GIMP, or Alternatives

PDF download Download Article
Learn ways that you can remove the blur from pictures
PDF download Download Article

It’s frustrating to snap a photo that’s almost perfect, only to find that the focus is a little bit off. Fortunately, it’s becoming easier than ever to sharpen a blurry photo with photo editing software. In this article, we’ll explain how to unblur an image using some of the sharpening tools in Photoshop and GIMP . We’ll also recommend some more user-friendly apps, websites, and desktop tools you can try if you want to automatically sharpen an image without going through a lot of steps.

Things You Should Know

  • If you have Photoshop, use Smart Sharpening or the Unsharp Mask tool to unblur an image.
  • Without Photoshop, try GIMP, a free alternative.
  • There are also more alternative choices, like using an app on your phone or tablet or websites to unblur images.
Section 1 of 5:

Smart Sharpening (Photoshop)

PDF download Download Article
  1. Before you adjust the sharpness of your image in Photoshop, set the view to full size. This will give you a more accurate sense of how well your adjustments are working. [1] To zoom in: [2]
    • Double-click on the Zoom tool (which looks like a magnifying glass) in the toolbar.
    • You can also open the View menu, then select either Actual Pixels or 100% depending on which version of Photoshop you’re using.
    • Alternatively, click the zoom level in the status bar at the bottom of the document window and type in 100% , then hit ⏎ Return or ↵ Enter .
  2. Open the Filter menu at the top of the screen, then select Sharpen , then Smart Sharpen . This will open a new dialog box. [3]
    Advertisement
  3. In the Smart Sharpen dialog box, you’ll see several controls that you can adjust to make your image look as good as possible. Experiment with the following until you get your image looking the way you want it to: [4]
    • Amount changes how much contrast there is between the pixels along any edges in the image. The higher the amount of contrast, the sharper the edges will look.
    • Radius determines how many pixels around an edge in your image will be affected by the sharpening. The sharpening effect will be more obvious if you choose a higher radius number.
    • Reduce Noise lets you minimize camera grain, which can become much more obvious when sharpening an image.
  4. The Remove dropdown menu lets you select the type of blur in the image, which can make Photoshop’s built-in sharpening tools more effective. For example, if your image is blurry because the lens wasn’t focused right, pick Lens Blur . For a photo that’s blurry because of movement, choose Motion Blur . [5]
    • If you’re trying to get rid of motion blur, you’ll need to adjust the Angle in the text field next to the Remove menu. The Angle tool helps remove motion blur by indicating the direction of the motion. [6]
  5. These controls let you adjust the amount of sharpening specifically in light and dark areas of the photo, which may be useful if you get strong halo effects in those areas. Depending on which version of Photoshop you’re using, you may need to click the Advanced button at the top of the dialog box to see the Shadows and Highlights tab. Otherwise, look for these controls under the main Smart Sharpen controls. [7]
    • The Fade Amount slider specifically targets the amount of contrast in the highlights and shadows of the image.
    • Tonal Width adjusts the range of dark or light tones that are affected by the sharpening process. If you use a smaller number, then your adjustments will be restricted to just the lightest and darkest areas of the picture.
    • Radius controls how much of the area around each pixel is taken into account to determine whether it falls in a shadow or a highlight.
  6. When you’ve adjusted the image the way you like, click OK to apply your changes. [8]
    7. Advertisement
Section 2 of 5:

Unsharp Mask (Photoshop)

PDF download Download Article
  1. Despite its name, the Unsharp Mask is a tool that sharpens images instead of blurring them. You can sharpen the whole image or just part of it using this method. If your image has multiple layers, go to the Layers Panel and select the layer you want to sharpen. [9]
    • If you don’t see the Layers Panel , open the Window menu at the top of the screen, then select Layers to open it.
    • Make sure the Layers tab is selected at the top of the panel, not Channels or Paths .
    • The Unsharp Mask creates a stronger sharpening effect than Smart Sharpen. It works by detecting pixels that look different from the pixels around them and increasing the contrast between them.
  2. Click the Menu button at the top right corner of the Layers Panel . It looks like a stack of horizontal lines with a down arrow next to it. Select Convert to Smart Object from the menu. [10]
    • This will make it easier for you to make edits to the Unsharp Mask later if you need to.
  3. You can apply the Unsharp Mask to the whole layer or just part of it. [11] If you want to sharpen selectively, click the Lasso Tool and use it to select the part of the image you want to sharpen.
  4. Open the Filter menu at the top of the screen, then select Sharpen , then Unsharp Mask . This will open a new dialog box. [12]
    • You should see a window with a preview of your image in the Unsharp Mask control panel. If you don’t see a preview, make sure the Preview option is checked in the dialog box.
    • You should be able to see the effects of the mask on the image in the main document window as well as the preview box. You can click and hold the image in the preview box to see it without the mask.
  5. The Radius slider controls how many pixels around an edge in your image are affected by the Unsharp Mask. For a high-resolution image, a low number such as 1 or 2 usually works best. [13]
    • The right radius number also depends on whether you want to print the image or not. Higher radius values are a lot less noticeable in print than on screen.
  6. More contrast will create a stronger sharpening effect. If you’re planning to print the image, try setting the contrast between 150% and 200%. [14]
  7. Threshold controls how different a pixel must be from the surrounding pixels to be counted as an “edge pixel.” Only edge pixels will be affected by the Unsharp Mask. You may need to experiment with different threshold levels to find what works best for your image. [15]
    • In general, values between 2 and 20 work best to avoid unwanted over-sharpening effects. [16]
  8. Since the Unsharp Mask works by increasing contrast between pixels, it may distort the colors in your image. To prevent this, open the Blend Mode menu, which is in the second row of tools at the top of the Layers Panel , to the left of Opacity . Change the Blend Mode from Normal to Luminosity . [17]
    9. Advertisement
Section 3 of 5:

Selective Sharpening with an Edge Mask (Photoshop)

PDF download Download Article
  1. Using an edge mask will help you sharpen just the important edges in your image for a better-looking final result. For instance, this is a useful technique if you want to sharpen the facial features in a portrait without over-sharpening the texture of the subject’s skin. Try this method for creating an edge mask in Photoshop: [18]
    • Open the Channels panel. If it isn’t already open, go to the Windows menu and select Channels . [19]
    • Select the channel with the highest contrast. This is usually the red or green channel. Click the eye button next to the other channels to hide them.
    • Duplicate the selected channel using the Channels Panel Menu in the top right corner. Enter a new name for the duplicate channel.
    • With the new duplicate channel selected, open the Filter menu, then select Stylize , then Find Edges .
    • Next, open the Image menu, select Adjustments , and choose Invert . This will invert the colors of the image.
    • To thicken the edges of the mask, open Filter , choose Other , then select Maximum . Enter a low number (e.g., 1 or 2).
    • Reduce noise in the image by opening Filter , then Noise , then Median . Choose a low radius number, such as 1 or 2, then click OK .
    • Open Image , go to Adjustment , then open Levels . Choose a high black point to help eliminate random pixels outside the true edges of your image.
    • In the Filter menu, choose Blur , then add Gaussian Blur to soften the edges of the mask and make it look more natural.
  2. -click the duplicate channel to select it. Or, if you’re using a Mac, ⌘ Command -click it instead. This will create a selection for your edge mask. [20]
  3. If the Layers Panel isn’t already open, display it by going to Window and choosing Layers . [21]
  4. In the Layers Panel , select the layer that contains the image you are working with. Make sure you can still see the selection you created from the edge mask in the image window. [22]
  5. Open Select , then choose Inverse . This will invert the selection you created. [23]
  6. With the edge mask still selected, open the Filter menu, then choose Sharpen . Select Unsharp Mask . [24]
  7. Use the controls in the Unsharp Mask panel to adjust the sharpness of the selection however you like. For instance: [25]
    • Adjust Radius to control the width of the sharpening effect around the edges of the selection.
    • Move the Adjust slider to set the level of contrast between the pixels.
    • Slide the Threshold control to set how different a pixel must be from the surrounding pixels to be affected by the Unsharp Mask.
  8. To see the final results of the selective sharpening, go back to the Channels Panel and select the RGB channel . Use Ctrl -click (in Windows) or ⌘ Command -click (on a Mac) to deselect the mask. [26]
    9. Advertisement
Section 4 of 5:

Smart Sharpening (GIMP)

PDF download Download Article
  1. GIMP is a free alternative to Photoshop that has many of the same tools, including the Unsharp Mask. If you want to change the image size or make any other edits, do that first before sharpening your image in GIMP. [27]
    • If you sharpen the image before doing other edits, the final results won’t look as good.
  2. Before you sharpen the picture, select it and press Ctrl + D . You can also duplicate the image by right-clicking it (or Ctrl-clicking, on a Mac with no right mouse button), then selecting Image and Duplicate from the context menu. [28]
  3. Right-click (or Ctrl-click, on a Mac) the duplicate image and select Image from the popup menu. From there, select Mode . [29]
  4. In the Colors > Components menu, choose Decompose . This will open the Decompose dialog box. [30]
  5. Click the LAB radio button in the Decompose dialog box. Make sure the Decompose to layers option is checked. When you’re done, click OK . [31]
    • If you’re using an older version of GIMP, you may not see the LAB option. In this case, select HSV instead.
    • Some versions of GIMP may not have the Decompose to layers option. The process will still work if you don’t select this option, but the channels will open in separate windows instead of in one window with layers.
  6. Click the eye buttons next to the A and B layers in the Layers, Channels, & Paths window. This will hide those channels so that only the L channel is visible. [32]
  7. Right-click (or Ctrl-click, on Mac) the duplicate image and select Filters from the context menu. Then, choose Edge Detect . [33]
  8. Select Edge from the Edge Detect menu. This will launch a new dialog box. [34]
  9. The Parameter Settings affect the width of the edges in your image. Experiment with higher or lower values using the Amount slider until you get the result you want. [35]
    • Under the Amount slider you’ll see a series of radio buttons, with Smear selected by default. Leave Smear selected. [36]
    • In some versions of GIMP, you may see additional Parameter Settings , including a variety of presets (such as Sobel , Gradient , and Differential ).
  10. Right-click (or Ctrl-click, on Mac) the image and select Image , then Mode . In the Mode menu, choose Grayscale . [37]
  11. Right-click the image (or Ctrl-click on Mac), select Image , then select Colors . In the Colors menu, choose Levels to launch the Levels dialog box. Set the black point high and the white point low to get rid of any random white pixels or unwanted extra edges in your image. [38]
    • In some versions of GIMP, there is a separate Colors menu in the menu bar at the top of the screen.
  12. Open the Filters menu, then select Blur . Choose Gaussian Blur . Set both the vertical and horizontal radius somewhere between 3 and 10 pixels. [39]
    • You may need to adjust black and white levels again after applying the Gaussian blur.
  13. To create a new layer , open the Layers dialog box on your LAB image and select the LAB Image in the dropdown menu at the top of the box. Then, select the Channels tab. Click the New Channel button at the bottom left corner of the dialog box (this button looks like a single page with a corner folded over). Name the new channel Sharpening Mask . [40]
    • If you used HSV instead of LAB, select Value from the dropdown menu instead of the LAB Image.
  14. Click the duplicate image where you applied the edge filter and go to the Select menu, then click Select All . Copy your selection and paste it into the original LAB image that you created. [41]
    • Make sure that the Sharpening Mask layer is selected when you do this.
    • Once you’ve pasted the selection into the new layer, click the Anchor button at the bottom of the Layers Panel to anchor the selection so you don’t accidentally move it.
  15. In the Layers Panel , make sure you have the Sharpening Mask channel selected in the Channels Tab . Then, click the Channel to Selection button at the bottom of the panel. It looks like a circle with a dotted outline. [42]
    • You should see a selection of the edges of your image appear in the main image window.
    • It might be helpful to click the Eye Button next to the Sharpening Mask layer to make it invisible so you can see your image and selection better.
  16. In the Layers, Channels & Paths panel, click the Layers tab. Select the Luminosity or L layer, and make sure no other layers are selected. [43]
    • If you’re working in HSV instead of LAB, select the Background Layer of the Value window.
  17. Open the Filters menu, then select Enhance . In the Enhance menu, select Unsharp Mask . You will need to experiment with the controls to see what works best for your image. [44]
    • In general, you’ll probably find that low numbers in the Radius , Amount , and Threshold settings give the best results. For instance, try setting all of these between 0 and 2.
  18. Right-click the image (Mac: Ctrl-click) and choose Select from the context menu, then click None . Zoom in on your image to make sure that it looks the way you want it to. [45]
  19. Right-click (or Ctrl-click, on Mac) the image and select Colors in the context menu. Select Components , then Compose . In the Compose Options dialog box, be sure to check that you have selected the correct option (either LAB or HSV, depending on what you selected when you decomposed the image) and that the L, A, and B or H, S, and V thumbnails on the right are matched up to the correct components. Then, click OK . [46]
    • You should now see a new image with all the channels combined to show the original colors.
    • When you’re done, zoom in on the image to examine it and make sure it looks the way you want it to.
    20. Advertisement
Section 5 of 5:

Other Unblurring Tools

PDF download Download Article
  1. If you’re looking for a quick and easy way to sharpen your image, there are several online tools you can try. Some popular options include:
  2. There are several apps for mobile devices that you can use for quick, user-friendly image sharpening. Many of these apps are completely free to use or allow you to use the unblurring feature for free. Some of these apps use AI-based technology to sharpen your photos. Try apps such as:
  3. In addition to GIMP, there are a variety of other desktop-based photo editing programs that allow you to sharpen images. Some of these alternatives are quite simple and user-friendly if you’re interested in a less complicated unblurring process. Try software such as:
    4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I avoid taking blurry images of moving subjects?
    Kari Bjorn
    Photographer
    Kari Bjorn is a Professional Photographer based in West Hartford, Connecticut. With nearly 10 years in the industry, Kari is a specialist in Film and Digital Wedding Photography. He has a wide array of photography interests and experiences. Kari is originally from Iceland and came to the US a decade ago to pursue photography at the Parsons School of Design in New York City. His previous editorial and commercial clients include Vanity Fair, InStyle, UN Women, The French-American Foundation, Plug & Play, KRANTZ + KRANTZ, and NPR. Kari has exhibited his work at the Aperture Gallery in New York City, the Eastern State Penitentiary Museum in Philadelphia, and Fotografiska in Stockholm, Sweden. He also had a solo exhibition at I Kring 03 in Reykjavik, Iceland in 2019.
    Kari Bjorn
    Photographer
    Expert Answer
    You can try adjusting your shutter speed. For fast-moving subjects, set it to a high value like 1/1000 of a second to freeze the action completely. Alternatively, for a creative effect or when shooting slower-moving subjects, use a slower shutter speed around 1/30 or 1/60 of a second. If you use a slower shutter speed, you can use the technique called panning, where you anticipate the movement of your subject, pre-focus your camera, and as the subject moves past, you press the shutter button while smoothly moving your camera along with it. This technique creates clarity for the subject against a blurred background.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Older versions of Photoshop have a Camera Shake Reduction feature, but this has been phased out with the newest version due to compatibility issues. [47]
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      5 Simple Ways to Convert Pictures to JPEG
      The 5 Best Ways to Convert HEIC Photos to JPG on a Mac
      How to
      Save Images to PNG Format
      How to
      Convert JPG to Bitmap on Windows and Mac
      4 Free Ways to Convert JPG to PNG
      Creating an SVG File in Illustrator or Inkscape: A Step-by-Step Tutorial
      8 Easy Steps to Add GIFs on Telegram in Messages
      Convert Any Image to an SVG File for Free
      How to
      Convert JFIF to JPG
      3 Simple Ways to Convert a PDF to GIF Format
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about photography, check out our in-depth interview with Kari Bjorn .

      References

      1. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      2. ↑ https://helpx.adobe.com/photoshop/using/viewing-images.html#zoom_in_or_out
      3. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      4. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      5. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      6. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      7. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      8. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      9. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      1. ↑ https://www.adobe.com/creativecloud/photography/discover/unsharp-masking.html
      2. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      3. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      4. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      5. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      6. ↑ https://www.adobe.com/creativecloud/photography/discover/unsharp-masking.html
      7. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      8. ↑ https://www.adobe.com/creativecloud/photography/discover/unsharp-masking.html
      9. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      10. ↑ https://helpx.adobe.com/photoshop/using/channel-basics.html
      11. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      12. ↑ https://helpx.adobe.com/photoshop/using/layer-basics.html
      13. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      14. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      15. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      16. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      17. ↑ https://helpx.adobe.com/photoshop/using/adjusting-image-sharpness-blur.html
      18. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      19. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      20. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      21. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      22. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      23. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      24. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      25. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      26. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      27. ↑ https://docs.gimp.org/2.6/en/plug-in-edge.html
      28. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      29. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      30. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      31. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      32. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      33. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      34. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      35. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      36. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      37. ↑ https://www.gimp.org/tutorials/Smart_Sharpening/
      38. ↑ https://helpx.adobe.com/photoshop/using/reduce-camera-shake-induced-blurring.html

      About This Article

      Thanks to all authors for creating a page that has been read 23,419 times.

      Is this article up to date?

      Advertisement