Download Article
A guide to using your PC or Mac's mouse to type on an on-screen keyboard
Download Article
It is 2 AM. You have an important project due tomorrow and have gone into hyperdrive. You should have never waited so late, but the adrenaline has spiked and you are sailing though the typing like a professional keyboardist, when, all of a sudden, you have nothing. You are typing along, but nothing is going on the screen. Oh no! - A disaster of the first order. - Your keyboard has gone out. - What can you do? - Call a friend and ask them to bring you a keyboard and a cup of java? - Not hardly! - Just suck it up and access your on screen keyboard with a mouse. Note: If you have more time, you can train your computer to respond to voice commands.
Steps
Transition to a virtual on-screen keyboard
-
Unplug the keyboard from your computer and set it aside. Put the keyboard in a safe place for repair, refurbishing or reuse. Don't throw it away until you have had time to troubleshoot the problem. It may just be the connector or an intermittent short.
-
Open the on-screen keyboard.
- Click on the icon in the menu bar next to the day of week.
- Click Show Keyboard Viewer from the drop down menu.
Advertisement -
Maneuver the mouse to click on the individual letters on the on-screen layout of the virtual keyboard.
Advertisement
Transition back to the traditional, physical keyboard
Windows XP
-
Open the on-screen keyboard:
Start → All Programs → Accessories → Accessibility → On-Screen Keyboard . -
Configure the virtual on-screen keyboard control options. On the virtual keyboard, click Options and select one of the following radio buttons, then click OK :
-
- 1) C lick on keys - letters, numbers and special keys are selected from the virtual keyboard by a mouse click.
- 2) H over over keys - letters, numbers and special keys are selected from the virtual keyboard by hovering over a virtual key for the specified duration.
- Set H o
ver duration
between 0.5 and 3 seconds.
- 3) S can through keys - Uses advanced look ahead.
- Set Sca n ning speed between 0.5 and 3 seconds.
-
-
Select the keyboard layout. Choose to display the numeric keypad or not.
-
Position the cursor within your document and sequentially select the keys using the mouse to control the cursor position on the virtual on-screen keyboard.
-
Move the virtual keyboard if necessary. You may drag the keyboard to another part of the screen, minimize it, or close it out.
-
Configure the virtual on-screen keyboard to start upon reboot (if desired).
- Under Explore all settings
select
Use the computer without a mouse or keyboard . - Tick the box to the left of Use On-Screen Keyboard
and click Apply
, then OK
.
The virtual on-screen keyboard will come up each time you start your computer.
- Under Explore all settings
select
Advertisement
Windows Vista
-
Open the on-screen keyboard: Start → All Programs → Accessories → Ease of Access → Ease of Access Center → On-Screen Keyboard .
-
Configure the virtual on-screen keyboard control options. On the virtual keyboard, click Options and select one of the following radio buttons, then click OK :
-
- 1) C lick on keys - letters, numbers and special keys are selected from the virtual keyboard by a mouse click.
- 2) H over over keys - letters, numbers and special keys are selected from the virtual keyboard by hovering over a virtual key for the specified duration.
- Set H o
ver duration
between 0.5 and 3 seconds.
- 3) S can through keys - Uses advanced look ahead.
- Set Sca n ning speed between 0.5 and 3 seconds.
-
-
Select the keyboard layout. Choose to display the numeric keypad or not.
-
Position the cursor within your document and sequentially select the keys using the mouse to control the cursor position on the virtual on-screen keyboard.
-
Move the virtual keyboard if necessary. You may drag the keyboard to another part of the screen, minimize it, or close it out.
-
Configure the virtual on-screen keyboard to start upon reboot (if desired).
- Under Explore all settings
select
Use the computer without a mouse or keyboard . - Tick the box to the left of Use On-Screen Keyboard
and click Apply
, then OK
.
The virtual on-screen keyboard will come up each time you start your computer.
- Under Explore all settings
select
Advertisement
Windows 7
-
Open the on-screen keyboard: Start → All Programs → Accessories → Ease of Access → On-Screen Keyboard .
-
Configure the virtual on-screen keyboard control options. On the virtual keyboard, click Options and select one of the following radio buttons, then click OK :
-
- 1) C lick on keys - letters, numbers and special keys are selected from the virtual keyboard by a mouse click.
- 2) H over over keys - letters, numbers and special keys are selected from the virtual keyboard by hovering over a virtual key for the specified duration.
- Set H o
ver duration
between 0.5 and 3 seconds.
- 3) S can through keys - Uses advanced look ahead.
- Set Sca n ning speed between 0.5 and 3 seconds.
-
-
Select the keyboard layout. Choose to display the numeric keypad or not.
-
Position the cursor within your document and sequentially select the keys using the mouse to control the cursor position on the virtual on-screen keyboard.
-
Move the virtual keyboard if necessary. You may drag the keyboard to another part of the screen, minimize it, or close it out.
-
Configure the virtual on-screen keyboard to start upon reboot (if desired).
- Under Explore all settings
select
Use the computer without a mouse or keyboard . - Tick the box to the left of Use On-Screen Keyboard
and click Apply
, then OK
.
The virtual on-screen keyboard will come up each time you start your computer.
- Under Explore all settings
select
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
About This Article
Thanks to all authors for creating a page that has been read 70,548 times.
Advertisement
