Download Article
Plus tips for cleaning out your Bissell Proheat vacuum
Download Article
Bissell upright carpet cleaners are a heavy-duty carpet cleaner for at-home use. They are ideal for homes with lots of carpet, heavy traffic and pets.
Using a Bissell Carpet Cleaner
- Fill the water compartment with very hot water.
- Fill the solution container to the fill line to your chosen cleaning solution.
- Set the front machine dial to “floor cleaning” and the top one to your desired intensity.
- Plug in the machine and work in small areas to clean your carpet.
- On each carpet area, start with a “wet pass” with the trigger pressed down.
- Then, pass over the same area with the trigger released until the carpet is dry.
Steps
-
Pretreat your carpet with a spray-on pet stain remover. This is best for discolored areas, heavy traffic areas or noticeable pet stains or smells. Leave it to sit while you prep the machine. -
Lift the handle from the water compartment at the front of the Proheat cleaner. Pull up and take the container to your sink. [1] X Research sourceAdvertisement -
Pull the plastic lever on the back of the container and lift the top section out. You will see a hole in the bottom part where the hot water will go. Fill with very hot water and replace the top portion of the container. [2] X Research source- Make sure the plastic lever snaps shut.
- Replace the plastic container on the front of the machine and release the handle.
-
Remove the plastic solution container from the back of the carpet cleaner. Take the container to the sink. Pour in the solution or a mix of solution and hot water, according to the directions on the back of the cleaning solution bottle. [3] X Research source- Pay attention to the fill line.
- Replace it on the back of the machine.
-
Set the dial on the front of the machine to “floor cleaning” rather than “tools.” Any time you use an attachment, you need to change this setting. -
Use the dial at the top of the machine to set the intensity of your cleaning, such as “rinse,” “normal cleaning,” or “heavy cleaning.” [4] X Research source -
Remove all the furniture from the carpet you are about to clean. -
Plug in the machine and start at the area furthest away from you. Starting at the edges and working toward the door will ensure you don’t tread on the newly cleaned carpet as it dries. [5] X Research source
Advertisement
-
Go to the first section of the carpet. You will work in small areas, cleaning several feet at a time. Turn on the power button and the heater button.- The heater button helps the carpet dry faster.
-
Step on the small lever on the bottom left edge so that the cleaner reclines and you can push it. Identify the trigger on the handle. When you pull the trigger, cleaning solution is released. -
Depress the trigger and push the cleaner forward as far as you can comfortably reach. Keep the trigger pressed down and bring the cleaner back toward you. This is referred to as a “wet pass.” -
Let the trigger go and make several “dry passes” when the cleaner and water are not being used. Repeat until no more water is being pulled up. -
Repeat until the area of the carpet is cleaned. [6] X Research source -
Switch the dial to “tools” to use the attachments to clean smaller areas. You will use the same general instructions with the brush as you would with the floor cleaner. Make a wet pass with the trigger depressed and then make several dry passes. [7] X Research source- Remember to change the dial to “floor cleaner” before you use the upright function again.
-
Allow the carpet to dry completely before replacing furniture and walking on it.
Advertisement
-
Pay close attention to the dirty water in the front container on your Bissell cleaner. When it fills up, you will need to change it. Consider moving it to linoleum to reduce the chance that you will spill the dirty water on the carpet. -
Turn the cleaner off. Lift the handle and remove the water basin. Pour the dirty water into the sink. -
Refill the water basin with hot water. Check that you have enough solution to continue. You will change the water tank more frequently than the solution tank.- You will need to change the water several times for larger cleaning jobs.
Advertisement
Community Q&A
Search
-
QuestionWhere can I find the Bissell Proheat Pet manual?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerIf you’ve lost your original paper manual, you can find user’s guide online on the Bissell website. Do a search for “Bissell Proheat Pet user’s guide” and download the PDF file to your computer or mobile device.
-
QuestionWhat do I do if my Proheat Pet has no suction?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerA loss of suction could mean that the tank is cracked, the machine is on the wrong setting, or the nozzle is cracked or clogged. Another problem could be that the tank lid isn’t attached right or the motor duct gasket screen is blocked by debris. Examine the various parts of your Proheat Pet to make sure that there are no problems in any of these areas.
-
QuestionHow do I clean my Proheat Pet?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerTurn off the power and remove the water tank. Empty the tank and rinse it with hot tap water. Clear any debris from the lint trap and replace the tank. Remove the flow indicator filter and rinse it, as well as the cap and rotor. Remove any loose hair or lint from the brush roll. To clean the outside of the machine, wipe it down with a soft cloth.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Prep your cleaner and change the water on an easy to clean surface, like a laminated kitchen floor. The containers drip when changed.Thanks
- Pay attention for clumps of hair that gather as you clean your floors. Pet and human hair can become embedded in the fibers. Remove the clumps and throw them away as you find them. The carpet cleaner will not remove them.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Carpet cleaning solution
- Hot water
- Pretreating solution
- Sink
Expert Interview
Thanks for reading our article! If you'd like to learn more about using a carpet cleaner, check out our in-depth interview with Margaret Maragh .
References
- ↑ https://www.youtube.com/watch?v=JBuzaEUsxsc
- ↑ https://www.bissell.com/proheat-2x-revolution-pet-carpet-cleaner-1548#downloads
- ↑ https://www.youtube.com/watch?v=0qMuvG1wjzI
- ↑ https://www.youtube.com/watch?v=0qMuvG1wjzI
- ↑ https://www.bissell.com/proheat-pet-upright-carpet-cleaner-1799?tab=closer
- ↑ https://www.youtube.com/watch?v=gRPlB0yVnKc
- ↑ https://www.youtube.com/watch?v=JBuzaEUsxsc
About This Article
Article Summary
X
To use a Bissell Proheat Pet, start by lifting the handle on the water compartment at the front of the cleaner and bringing it to a sink. Then, pull the lever on the back of the container and lift the top section out so you can pour hot water into the container. Next, remove the plastic solution container on the back of the cleaner and fill it with a mix of solution and hot water. Once you've placed both containers back on the cleaner, set the dial on the front to "floor cleaning," choose an intensity, and plug in the machine. To learn how to change out dirty water in the cleaner, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 242,922 times.
Reader Success Stories
- "Wasn't sure how to use carpet cleaner but with great pics and clear instructions I was able to use my cleaner without having to guess if I was doing it correctly. Thanks for such good and easy-to-understand descriptions and instructions." ..." more
Advertisement
80%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Wasn't sure how to use carpet cleaner but with great pics and clear instructions I was able to use my cleaner without having to guess if I was doing it correctly. Thanks for such good and easy-to-understand descriptions and instructions."
..."
more
"How to pull back dirty water. My other rug cleaner (different brand) was easier to use. Very clear instructions on how to pull back dirty water."
..."
more
"I loved the step-by-step pictures and text. It's perfect for people like me who learn better visually. Thanks!"
"It helped me to understand how to prepare the water and cleaner."
