How to Use a Scroll Saw

PDF download Download Article
PDF download Download Article

Scroll saws are used to cut intricate designs in wood and metal craft projects. Draw your design onto the material first, before putting on your safety gear and adjusting the settings on the machine. Start cutting out your design by testing the scroll saw on a piece of scrap wood, choosing the right speed, and carefully guiding your project through the blade. Make gifts for your friends and family to practice using different types of wood and new designs, and watch your scroll sawing confidence grow!

Part 1
Part 1 of 2:

Setting Up the Scroll Saw

PDF download Download Article
  1. Use a pencil to draw the outline of your design. Make sure that your pencil markings are easily visible on the wood. Add bridges within the pattern to create areas of positive and negative space. [1]
    • Positive space is where the wood is still intact and negative space is where the wood has been removed.
    • The bridges are the positive spaces on the wood that connect the different parts.
    • Stick to a simple design if you are just beginning to use a scroll saw. For example, practice making a leaf or a flower first, with only a few areas of negative space. [2]
    • There are many scroll saw patterns for beginners available online.
  2. Place your safety goggles over your eyes before you turn on the machine, and wear them for the whole duration that it is on. These will protect your eyes from any broken blades and from sawdust irritation.
    • Tie back your hair if it is long before you use the scroll saw.
    • You can also wear a dust mask if you prefer.
    • Make sure that you aren’t wearing baggy sleeves or long jewelry that could get caught in the blade. [3]
    Advertisement
  3. Refer to the manufacturer’s instructions for your scroll saw to learn how to bolt, screw, or clamp the machine onto the surface. Follow all of the instructions fully.
  4. Thin wood requires a smaller blade. The lower the number of the blade, the smaller it is. [4]
    • Smaller blades tend to cut through the wood more slowly. This also means that you have more control when you are using the scroll saw.
    • Intricate designs are more accurately cut with smaller blades.
  5. As the thickness of the wood increases, use a larger blade. The higher the number of the blade, the denser and thicker the wood it can cut through. [5]
    • If you are going to be cutting more than 1 piece of wood, consider how thick the overall stack will be. Although the individual pieces of wood might be thin, you will need to use a larger blade.
  6. Once you have fitted the correct blade, adjust the tension according to the manufacturer's instructions. Apply a moderate amount of pressure to the midpoint of the blade with your finger. A blade that has been set to the correct tension will not move more than ⅛" in (3 mm) in any direction.
    • The right tension of the blade is about finding the balance between having the blade tight enough so that it doesn’t cave and is accurate, but not so tight that it snaps. [6]
    • You can also check the tension of the blade by plucking it like a guitar string. A blade that has the right tension will make a sharp ping noise.
    • Generally, the larger the blade the higher the tension it can withstand.
  7. Plug the saw into an electrical socket, and turn the power switch of the machine on. Make sure to also turn machine light on so that you can see what you’re doing while you use the scroll saw.
    • Some scroll saws don’t come with a light source. If this is the case, get a bright lamp and position it so that you can see the saw and your work fully. You can also purchase specialty lights that can be mounted directly onto a scroll saw.
    • If your machine has a dust blower, switch this on too. This will remove the dust from your work as you use the scroll saw so that you can see your design clearly.
    8. Advertisement
Part 2
Part 2 of 2:

Cutting Out Your Project

PDF download Download Article
  1. Use a piece of scrap wood that is either the same or very similar to what you are using for your project. Make a small cut to check that the size of the blade is right for the wood and that the tension feels correct.
    • Practicing on a piece of scrap wood first will also let you make sure that the lighting is sufficient.
  2. The thinner and denser the wood is that you will be cutting, the slower the speed needs to be Set the scroll to a very slow speed if you are unsure, as you can always adjust it as required. [7]
    • Stick to a slower speed if you are just beginning to use a scroll saw, as this will give you better control as you learn. [8]
  3. Softwoods such as maple require faster cutting speeds when using a scroll saw than harder types of wood. If you are just beginning to use a scroll saw, test out the different speeds on a piece of scrap wood first to make sure that you feel confident operating it at a higher speed. [9]
  4. Bring your project up to the blade, and aim it towards the first line that you need to cut. Press the wood down and forward to guide it into the blade. Adjust the wood as necessary for small turns using your forefingers and 1 thumb. Keep the other thumb out of the way of the blade as you guide the wood.
    • Keep an eye on your fingers and the blade at all times to make sure that the blade doesn’t get too close to your hands. [10]
    • Keep both hands on the wood at all times. Otherwise this might cause the scroll saw to jump and to make a jagged cut.
    • Stick to the speed of the machine. Never rush the wood through the machine faster than the speed that the blade is cutting, otherwise your fingers could slip or your design could be crooked.
  5. Once the blade reaches a turning point of 90° or larger, draw the wood back towards you to move the blade back through the line that has already been cut. Turn the wood around so that the blade is facing the adjacent line, and continue cutting and guiding your project past the blade.
    • You don’t need to worry about removing the wood and turning it if you are using a spiral blade. These can cut in all directions, so you simply just need to turn your project as necessary. [11]
  6. When you have finished cutting your project and you are happy with the final result, switch the scroll saw off using the power button or switch. Take the blade out of the saw and return it to the storage container.
    • If you aren’t going to be using the scroll saw again soon, detach it from the workbench and store it away.
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How is the center cut out?
    Community Answer
    A small hole is drilled, then the blade is removed and placed into the hole. Cut around it, then remove the blade once you're done.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 39
  • Question
    What are some health and safety tips when working with a scroll saw?
    Community Answer
    Never put your fingers in direct line with the blade. Always hold the wood down tight. Never push the wood into the blade, only gently push the wood.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 23
  • Question
    How do I choose a blade for a particular job?
    Community Answer
    It all depends on your project. The thinner the blade, the easier it will be to make tighter and quicker turns, which are good if you need to cut out small things. Thicker blades are the opposite. They make it difficult to make quick and tight turns, but they are good for cutting out thicker pieces of wood.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 19
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Avoid cutting sharp turns continuously. Cut one angle and then cut another angle separately.
        Thanks
        Helpful 0 Not Helpful 0
      • Backing out of a cut and approaching it from another angle might be helpful when cutting fine turns or small details.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Always be concentrated and never rush while using a scroll saw, as this can be dangerous. [12]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You’ll Need

      • Pencil
      • Wood
      • Safety goggles
      • Dust mask
      • Workbench
      • Scroll saw
      • Scroll saw blade
      • Lamp

      You Might Also Like

      How to
      Sharpen a Chainsaw Blade with a File
      How to
      Measure Chainsaw Bar Length
      How to
      Unlock a Dewalt Miter Saw
      How to
      Safely and Properly Use a Circular Saw
      How to
      Adjust a Miter Saw
      How to
      Cut Angles on a Table Saw
      How to
      Operate a Chainsaw
      How to
      Start a Stihl Chainsaw
      How to
      Adjust Chainsaw Tension
      How to
      Clean a Chainsaw
      Advertisement

      References

      1. ↑ http://scrollsawer.com/2017/09/13/adapting-patterns-2/
      2. ↑ https://www.craftideas.info/html/scrollsaw.html
      3. ↑ https://www.woodmagazine.com/woodworking-tools/power/scrollsaw-expert-advice
      4. ↑ http://scrollsawer.com/2017/09/06/choosing-the-right-blade/
      5. ↑ http://scrollsawer.com/2017/09/06/choosing-the-right-blade/
      6. ↑ http://www.thewoodbox.com/data/scrollsaw/scbladeteninfo.htm
      7. ↑ https://houseandbeyond.org/how-to-use-a-scroll-saw/
      8. ↑ https://woodworkingtoolkit.com/scroll-saw-beginners/
      9. ↑ https://houseandbeyond.org/how-to-use-a-scroll-saw/
      1. ↑ https://woodworkingfuel.com/tips/use-tools/scroll-saw/
      2. ↑ http://www.fundamentalsofwoodworking.com/woodworking-resources/Woodworking-Articles/the-trick-to-cutting-detailed-scroll-saw-patterns
      3. ↑ https://woodworkingfuel.com/tips/use-tools/scroll-saw/

      About This Article

      Article Summary X

      To use a scroll saw, start by drawing your design or pattern on the wood's surface with a pencil. Next, bolt or clamp the saw to your work surface and fit the saw with a blade that best accommodates your project. For example, use a #2 or #3 blade for thin wood or especially intricate designs. Then, adjust the blade tension and speed. Finally, guide the design through the blade using both hands, following along the penciled cut lines you created. For tips on making 90 degree turns with your scroll saw, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 148,552 times.

      Reader Success Stories

      • Bob Fergus

        Jul 17, 2016

        "Very nice."
      Share your story

      Did this article help you?

      Advertisement