How to Use an Operating System from a USB Stick

PDF download Download Article
Boot up your OS from a USB drive
PDF download Download Article

You can install an operating system onto a flash drive and use it like a portable computer by using Rufus on Windows or the Disk Utility on Mac. For each method, you'll need to acquire the OS installer or image, format the USB flash drive, and install the OS to the USB drive. Don't forget to activate USB booting in the BIOS for Windows and switch the startup disk for Mac!

Method 1
Method 1 of 2:

Creating a Windows or Linux Bootable Drive with Rufus

PDF download Download Article
  1. BIOS (Basic Input/Output System) helps you manage the hardware in your computer. During startup press the designated key to access the BIOS (typically F2 or Del ). Use the arrow keys to navigate to the “Boot” tab. Move USB to the top of the list with ↵ Enter . Select “Save and Exit” and your computer will reboot with the new settings.
    • Different manufacturers use different types of BIOS in their computers. Check your manufacturer’s specifications for exact buttons for accessing and altering the BIOS configuration.
  2. You will want a flash drive with at least 16GB capacity. USB 2.0 will work, but the greater speed of USB 3.0 is highly preferable.
    • 32GB or greater is recommended if you want to fit anything beyond the operating system on the drive. The increase in storage capacity is relatively inexpensive (~$5 difference between 16 and 32 GB)!
    Advertisement
  3. The Rufus website has a collection of links to downloadable OS disk images at the bottom of the page under the header “Non-exhaustive list of ISOs Rufus is known to work with”. The file you'll need to download is called an ISO.
  4. Download and open Rufus . Rufus is a self-contained program and does not need to be installed -- only downloaded and opened.
  5. It will appear listed with your other drives in “This PC”.
  7. MBR (Master Boot Record) is an older, but more common disk structure used widely in Windows computers.
    • You can select GPT (GUID Partition Table), a newer technology, but you may have compatibility issues installing some operating systems. [1]
  8. Use “NTFS” if you are installing Windows to your bootable USB stick drive and “exFat” if you are installing Linux to your bootable USB stick drive.
  9. This checkbox is listed under the “Format Options” header and will allow you to use an ISO to create your bootable USB drive. An ISO (disk image) is digital file containing the contents of a disk - in this case the operating system you will install.
  11. The disk icon is located to the right of the dropdown where you selected ISO image.
  12. A progress bar will display the progress. You will be notified when the process is complete.
    • Note: This process will format the flash drive. Formatting the USB drive will erase ALL content. If you have any data on your USB flash drive you want to save, copy it to your computer first to save it.
  13. With USB booting enabled, your computer should restart and use the USB to boot using the disc image.
    • Some BIOS have a separate menu specifically for selecting your startup disk. This menu will have a different access button on startup from the regular BIOS menu. [2] Check with your manufacturer’s specifications to determine if this is the case if you are having trouble booting into your flash drive.
    14. Advertisement
Method 2
Method 2 of 2:

Installing macOS/OSX to a Portable Drive

PDF download Download Article
  1. To install a modern macOS/OSX operating system, you will want a flash drive with at least 16GB capacity. USB 2.0 will work, but the greater speed of USB 3.0 is highly preferable.
    • 32GB or greater is recommended if you want to fit anything beyond the operating system on the drive. The increase in capacity is relatively inexpensive (~$5 difference between 16 and 32 GB)!
  2. Search for the version of macOS/OSX you want to install and press “Download”. The installer will appear in your Applications folder when when the download is complete.
  3. The drive will mount automatically and appear on the desktop.
  4. The Disk Utility is used to manage and modify your drives. Your flash drive will appear in the list of drives on the left.
  5. Partitioning is a way to split your drive’s storage into separate spaces. This button is one of the tabs listed below the menu bar. The tab contains options for formatting the USB drive and setting it up to be bootable.
  6. A single partition will maximize the space for your portable operating system.
  7. This format is necessary to run the operating system.
    • Note: Formatting the USB drive will erase ALL content. If you have any data on your USB flash drive you want to save, copy it to your computer first to save it.
  8. This button is below the partition table and opens up a menu of options for the selected partition.
  9. This partition scheme is necessary to make the partition bootable.
    • Other options are used for making a drive bootable to PowerPC or Windows computers, but a modern macOS/OSX will not function properly on most non-Mac hardware.
  10. A progress bar will appear indicating the formatting and partitioning progress. This process may take a few minutes. When complete, the progress bar will disappear.
  11. The installer is located in your Applications folder.
  13. Clicking this button agrees to the licensing information displayed in the installer window.
  14. This will let you select which disk to install the operating system to.
  15. The installation will begin and will probably take around 30 or more minutes. When installation is complete you will be prompted to setup the new OS.
    • You may be prompted to enter your computer’s login information after pressing install to verify the action.
  16. You will be prompted for information like username/password, location, and wifi info to configure your new OS installation. After you finish you will be booted into your portable drive.
  17. You want to make sure to switch your default startup disk back to your computer’s hard drive to avoid problems after you remove the flash drive.
  18. You will boot back into your computer’s hard drive and you can now safely eject your flash drive.
    19. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How long does it take to put Windows 10 on a flash drive?
    Luigi Oppido
    Computer & Tech Specialist
    Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years.
    Luigi Oppido
    Computer & Tech Specialist
    Expert Answer
    Once you format the flash drive, it takes about 20 minutes to create a bootable flash drive for Windows 10.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
  • Question
    What button do you press to interrupt the boot sequence?
    Luigi Oppido
    Computer & Tech Specialist
    Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years.
    Luigi Oppido
    Computer & Tech Specialist
    Expert Answer
    That depends on the manufacturer: On most Dells it's F12, most HPs are F2, and Lenovo has a tiny button you have to push with a pin.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 5
  • Question
    Can I go back and forth between my original and the USB OS?
    Community Answer
    You technically can, but it does require a restart every time you want to switch OS's
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 14
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Using a macOS/OSX portable drive on a Windows computer or vice versa is likely to encounter significant incompatibility issues. A portable Linux installation is likely to function on either machine.
        Thanks
        Helpful 0 Not Helpful 0


      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      11 Tips & Tricks to Fix a Missing Windows Laptop Mouse Cursor
      How to
      Enable Function Keys via Your Keyboard or Computer Settings
      How to
      Open EXE Files
      How to
      Use Keyboard Shortcuts
      Installing Two Operating Systems on Your PC: Dual Boot Guide
      How to
      Install an Operating System on a Brand New Computer
      How to
      Install Linux Programs from TGZ Files: 7 Easy Steps
      How to
      Install a Different Operating System on a PC
      How to
      Unlock a Sim Card Without a PUK Code
      How to
      Make a Computer Operating System
      How to
      Encrypt Your Samsung Phone
      How to
      Lock Desktop Icons in Place
      How to
      Use MS DOS
      How to
      Check PC Specs on a Computer, Phone, or Tablet
      Advertisement

      References

      1. ↑ http://www.disk-partition.com/gpt-mbr/difference-between-mbr-and-gpt-1203.html
      2. ↑ Luigi Oppido. Computer & Tech Specialist. Expert Interview. 24 February 2021.

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 524,149 times.

      Reader Success Stories

      • R. R.

        Mar 23, 2017

        "I was thinking a long time about creating a flash drive for other uses. This helped me to do it easily."
        Rated this article:
      More reader stories Hide reader stories
      Share your story

      Is this article up to date?

      Advertisement