How to Wire Wrap Stones

PDF download Download Article
PDF download Download Article

Wire wrapping is a technique that involves bending wire around stone, sea glass, shells, amber, or other ornamental centerpieces to create a piece of jewelry. Wire wrapping can create beautiful rings, pendants, necklaces, and other similar kinds of adornments. What's more, when wire wrapping you don't need elaborate tools to drill and bore holes into the stone. With just a few simple tools and supplies, you could soon make your very own piece of wire wrapped jewelry!

Part 1
Part 1 of 4:

Determining Ideal Materials

PDF download Download Article
  1. You might have found a beautiful piece of sea glass while walking the beach, or maybe you have a semi-precious stone that you think is just breathtaking, but either can make a beautiful piece of wire wrap art. Symmetrical shapes can give your wire wrap a more professional look, but sometimes interesting shapes can further accentuate the centerpiece around which you will wrap your wire.
    • For the purposes of this example, a round, polished stone bead will be used. However, the principles of wire wrapping described can be applied to many differently shaped centerpieces. Remember that every stone is a different shape and contours differently to wrapping around.
  2. Wire comes in many different varieties, both in terms of the material it's made and its thickness, which is commonly referred to as the "gauge" of the wire. Larger and heavier centerpieces will require a thicker gauge of wire. All wire used in this example is either 20 or 22-gauge, which is frequently recommended for beginners.
    • The lower gauge your wire, the thicker it is. For example, 8-gauge wire is very thick, while 26-gauge wire is quite thin.
    • You might consider using copper jewelry wire for your first wire wrap. Copper has a lovely color that compliments many different kinds of centerpiece, and is also relatively cheap.
    • Once you feel comfortable with your wire wrapping skills, you might use fine silver, sterling silver, gold plated, or gold filled jewelry wire.
    Advertisement
  3. In this example of wire wrapping, a round, polished stone bead is used as the centerpiece and is wrapped in an inexpensive brass wire. Most of these supplies should be available at your local hardware or craft store, or even online. For this project, you'll need:
    • 20-gauge square soft wire (4' (1.2 m))
    • 22-gauge half-round hard wire (1' (30 cm))
    • 22-gauge square hard wire (4½" (11.5 cm))
    • A faceted stone
    • Eye protection
    • Felt-tip pen
    • Flat-nose pliers
    • Neck chain (or other fastener)
    • Penknife (or comparably thin knife)
    • Round-nose pliers
    • Ruler
    • Tape
    • Wire cutter
  4. You'll want to clear any obstacles that might get in your way and make working with your wire difficult. Clear a broad area; while you are trying to cut or bend a longer piece of wire, you don't want to accidentally knock something over with the loose end.
    • Consider making use of a workbench, craft table, or laying down a drop cloth where you are working. While shaping and cutting the metal wire, sharp pieces can fly or flake off. A drop cloth will make cleanup much easier.
    5. Advertisement
Part 2
Part 2 of 4:

Forming the Wire Frame for Your Centerpiece

PDF download Download Article
  1. [1] Take your 20-gauge square soft wire and clip six pieces eight inches (20 cm) long free. For centerpieces that are bulky or larger, you might need to measure out more wire. The central frame of your wire wrap should be:
    • Long enough to warp around the perimeter of your centerpiece.
    • Thick enough to hold your centerpiece. Heavy/bulky centerpieces might require you to use more than six pieces of wire.
  2. Line up the wires and draw them tightly together, making sure each is parallel to the others. Then you should use your tape to bind the ends. This will keep your bundle in shape while you work with the wire.
    • Depending on the contour of your centerpiece, you may find a rounded wire frame works best. In this example, the wire frame has been flattened to better contain the polished bead centerpiece.
  3. [2] Lay out your bundled wire flat on your work space and, with your ruler, find the center of the bundle. Now, with your felt-tip pen, you should mark this point.
  4. This wire will be used to decoratively wrap around the middle mark you have just made on your bundle. Use your wire cutters to snip free a five inch (13 cm) piece of 22-gauge half-round hard wire.
  5. Use your flat-nosed pliers to grasp the piece of 22-gauge wire you cut free, then bend the wire around the bundle. After each winding, pull the wire tight while holding it against your bundle with your free hand. The bundle should be wrapped so there are no gaps in its twinnings, and should be equal length on both sides of your middle mark. [3]
    • Grasping your wire close to its end with your pliers can make shaping it easier.
    • After you finish your bundling, your middle mark should not be visible.
    • This bundle will eventually make up the bottom of your wrap.
    • The width of the finished binding should be approximately ¼" (6 mm) for a 12-carat stone, like the one used in this example. [4] [5]
  6. [6] Use your ruler and felt tip marker to draw a line a ¼" (6 mm) from each edge of your center binding. Then make another mark a ¼" (6 mm) outward from each of your previous marks.
    • These double marks on either side of your middle binding define the width of your next bindings.
  7. Now that you've got your middle binding in place and your lines drawn on each piece your six-wire bundle, you can remove your tape, as it is no longer needed to keep your bundle collected together.
    8. Advertisement
Part 3
Part 3 of 4:

Shaping the Cradle for Your Centerpiece

PDF download Download Article
  1. Slip your penknife between the bottom of your topmost wire and the wire immediately below it. Then, use your penknife to pry the topmost wire into the shape of an outward-pointing V. This V-shape should point away from the outer wires of your frame. Repeat this process until you have four Vs, one on each side of the top and bottom of your center binding.
    • Four V shaped twists on all sides of your center binding will create the sturdiest seating for your centerpiece. However, in this example, the polished stone bead is small and light, only requiring two V bends.
    • Each outer wire should have two V's on either side of the middle binding.
    • Each V begins at the edge of the binding, pointing out from the main bundle until the tip is in line with the first ¼" (6 mm) mark. Then bend the wire to meet the second ¼" (6 mm) mark.
    • After making your V bend seating, allow the remaining wire run parallel to the main bundle. [7]
  2. This will ensure that your V bends stay on the outside of your bundle, which will create the most stable seating for your centerpiece. It will also keep your wire frame bundle together while doing the next bindings.
  3. [8] Wrap the wire around your wire frame bundle with your pliers, starting at the outer part of your V's where the V returns to join the rest of the bundle. Do this for both sides of your six-wire bundle.
    • While wrapping your second and third bindings, be sure you keep the wraps tight, neat, and equal in length. A few turns on either side should be sufficient.
  4. Take your pliers and, carefully but firmly, bend your six-wire bundle around your centerpiece so that it wraps along the centerpiece's edges. Let both side of your six-wire bundle cross at the center-top of the stone.
  5. Bend one of the outermost strands of your six-wire bundle from either side with flat-nose pliers. Shape the wire so that it sticks upward and away from the rest of the wires. [9]
  6. Where both sides of your wire frame meet at the top of your design, align all strands so each faces the opposite direction of your first middle binding. The middle binding will form the bottom of your design, and the combined ends of your six-wire bundle will form the top.
  7. This will prevent your wires from becoming bent out of the intended shape of your design when making your final binding. Tape toward the end of your combined six-wire bundle.
    8. Advertisement
Part 4
Part 4 of 4:

Completing Your Wire Wrap

PDF download Download Article
  1. [10] Choose either the topmost or bottom-most wire of your combined bundle and wrap all wires together in a binding that tightly twines the top of your design together. A few wraps of 22-gauge square hard wire at the top should do.
    • Once you have finished this binding, you may remove the tape.
  2. Use pliers to bend the front and back Vs so as to form a secure seating in which the centerpiece sits. Once the centerpiece is in its cradle, take the final wire that has been pointing away from the bundle and wrap it around your centerpiece in a spiral design to further secure it.
    • The spiral design of your wire wrap will give a professional appearance to your jewelry.
    • If you notice your centerpiece is loose in its V and front settings, you may want to take another piece from your bundle and add another spiral wrap to the back for support.
    • Consider adding wavy designs, or spirals at the top of your wire wrap where you have extra wire to add your personal touch.
  3. Keep in mind while trimming excess wire that you'll need enough leftover at the top to make a loop of wire. You'll need this loop to thread a neck chain or some other kind of fastener, like a thin strip of leather.
  4. This O-shape will form the eyelet through which you will thread your neck fastener. Depending on the gauge of wire you have used, you may want to from your fastener eyelet with either one wire or two. [11]
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What tools do I need for wire wrapping crystals?
    Cory Schifter
    Jeweler & Certified Jewelry Appraiser
    Cory Schifter is a Jeweler, Certified Jewelry Appraiser, and the Owner of Casale Jewelers in Dongan Hills, Staten Island, New York. Casale Jewelers is known for its selection of fine jewelry, designer brands, engagement rings, certified diamonds, custom-made jewelry, and watches. Cory has over 10 years in the jewelry industry and is a certified jewelry appraiser. Cory was featured on NY1 News “Got it Made in New York” for Casale Jewelers’ custom design business and Casale Jewelers was recognized by American Express and Facebook in 2012 as one of the top five small businesses in the nation.
    Cory Schifter
    Jeweler & Certified Jewelry Appraiser
    Expert Answer
    Make sure that you're wearing protective gloves before you start wire-wrapping anything. Ultimately, you could slice your finger if you're not handling the wire properly.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 2
  • Question
    Can this be done with 26 gauge bronze or sterling silver plated wire on a very small delicate stone?
    Beth H.
    Community Answer
    26 Gauge wire can be shaped with the use of regular or fine tipped jewelry making tools. It should not be used as structure wire. It normally is used for coiling, weaving, knitting, and wrapping around stones, including small ones.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 24
  • Question
    How do I shape the wire without leaving indent and scuff marks on the metal?
    Community Answer
    There are Teflon-coated pliers available in most jewelry tools sections in craft stores. The wire can be wrapped around anything that has a smaller curve than the part that is being wrapped. It is easier to stretch out a curve than shaping and denting the wire. Rounded needlenose pliers can also be used. Be mindful that a minimal amount of pressure should be used or a deep dent will be made on the wire surface. Try manipulating the wire around the tool and use the tool as a holder instead.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 14
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • You can hide unsightly ends of your wire by leaving the bindings facing inward, toward the stone.
        Thanks
        Helpful 20 Not Helpful 9
      • Many kinds of wire come with a polishing agent still on the surface. This can turn your fingers black, but you can clean the wire easily by wiping it with a clean cloth or paper towel that has been wet with rubbing alcohol.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • When cutting wire especially, you should wear eye protection. Small, sharp pieces may fly off and can be dangerous.
        Thanks
        Helpful 11 Not Helpful 3
      Advertisement

      Things You'll Need

      • 20-gauge square soft wire (4' (1.2 m))
      • 22-gauge half-round hard wire (1' (30 cm))
      • 22-gauge square hard wire (4½" (11.5 cm))
      • A faceted stone
      • Eye protection
      • Felt-tip pen
      • Flat-nose pliers
      • Neck chain (or other fastener)
      • Penknife (or comparably thin knife)
      • Round-nose pliers
      • Ruler
      • Tape
      • Wire cutter


      You Might Also Like

      How to
      Make Handmade Jewelry
      How to
      Put a Picture in a Locket
      3 Gorgeous Paper Rings You Can Easily Make at Home
      How to
      Resize a Ring
      How to
      Make a Button Pin
      How to
      Solder Jump Rings
      How to
      Create Jewelry Using Your Breastmilk
      How to
      Make a Ring
      How to
      Make Resin Jewelry
      How to
      Make Sterling Silver Jewelry
      How to
      Make a Badge Pin
      How to
      Make Wooden Rings
      How to
      Make a Pin
      How to
      Make Enamel Pins
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about making jewelry, check out our in-depth interview with Cory Schifter .

      References

      1. ↑ http://www.rockhounds.com/rockgem/articles/wirewrap.shtml
      2. ↑ http://www.rockhounds.com/rockgem/articles/wirewrap.shtml
      3. ↑ http://www.rockhounds.com/rockgem/articles/wirewrap.shtml
      4. ↑ http://www.rockhounds.com/rockgem/articles/wirewrap.shtml
      5. ↑ http://dendritics.com/scales/carat-def.asp
      6. ↑ http://www.rockhounds.com/rockgem/articles/wirewrap.shtml
      7. ↑ http://www.rockhounds.com/rockgem/articles/wirewrap.shtml
      8. ↑ http://www.rockhounds.com/rockgem/articles/wirewrap.shtml
      9. ↑ http://www.rockhounds.com/rockgem/articles/wirewrap.shtml
      1. ↑ http://www.rockhounds.com/rockgem/articles/wirewrap.shtml
      2. ↑ http://www.rockhounds.com/rockgem/articles/wirewrap.shtml

      About This Article

      Article Summary X

      To wire wrap a stone, start by cutting 20-gauge soft wire into 6 8-inch long pieces and taping them together at the ends. Mark the middle of the bundled wire with a marker, then wrap a 5 inch piece of binding wire around the middle mark. Next, use a penknife to bend the topmost wire into a outward-pointing “V” shape on either side of the center to create a cradle for the stone. Then, shape the wires around your stone and use more binding wire to bind the ends together before trimming off the excess. For tips on how to choose the right shaped stone for your centerpiece, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 297,257 times.

      Reader Success Stories

      • Sharron Welch

        Aug 30, 2021

        "I am a novice at wireworking and this tutorial was such an inspiration! All steps were precise, easily understood ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement