PDF download Download Article PDF download Download Article

As a medical professional, you know that a diagnosis is essential. Without one, you have no way of knowing how to treat your patients. The diagnostic process can feel overwhelming, but rest assured that it will soon become second nature. The key thing is that you remember this is a collaborative, perpetually-ongoing process—you may refer your patient to other doctors and it may take multiple visits to revise, update, or confirm a diagnosis.

1

Use standard medical terminology throughout.

PDF download Download Article
  1. Using uniform medical language will make it easier for specialists, other doctors, and nurses to follow your line of thinking as you work through the diagnosis. Remember, medicine is a collaborative process, and there’s always a possibility that you’ll need to refer the patient elsewhere to another doctor. Keep this in mind while you work. [1]
    • Avoid using any loaded or judgmental language. The patient’s integrity matters, and you don’t want anyone reading the chart to judge the patient unfairly.
    • If you’re lucky enough to have a medical scribe, communicate what you’re doing verbally while you’re doing it—the scribe will write everything down for you.
  2. Advertisement
2

Take an inventory of the patient’s symptoms.

PDF download Download Article
  1. Be friendly, cordial, and reassuring. Have a conversation with the patient to see how they’re experiencing their symptoms. Ask about pain levels, note the time these symptoms are occurring, and probe to see if there’s anything the patient is doing to trigger or treat their symptoms. [2]
    • You may get a diagnosis just from doing this. If your patient says their foot hurts because a car ran over it, and you can see the bone protruding from the skin on their foot, you can reasonably say the patient broke a bone in their foot.
    • Ask follow-up questions as needed based on your specialty and knowledge.
    • Take your experience into account here. If you’ve seen these symptoms somewhere else before, use that knowledge to guide you.
3

Read the patient’s medical history.

PDF download Download Article
  1. Maybe they have an allergy that could explain their symptoms. Maybe there’s an unexplained symptom from a few years back that’s related to what you’re seeing now. Regardless, you must read through their medical history to get the full picture. Ask questions as needed to understand what the patient has done in the past in regards to their current condition. [3]
    • Follow these chronologically backwards from the initial visit throughout the patient's history to confirm any tie-in of symptoms.
    • Eliminate diagnoses that do not fit your patient based on their symptoms and history.
  2. Advertisement
4

Examine the patient and perform diagnostic tests.

PDF download Download Article
  1. Talking and reading can only get you so far. You’ll need to perform basic diagnostic tests and physically look at the patient. Be polite and reassuring—especially if you have to look at anything private or potentially embarrassing. Perform your physical exams and document your findings. [4]
    • The tests you choose are going to depend entirely on your specialty, but generally speaking, you should work from general diagnostic tests to more specific tests.
5

Create a working diagnosis.

PDF download Download Article
6

Rule out alternative possibilities.

PDF download Download Article
  1. Start with the easiest exams and tests that can be performed in the exam room at this moment. It’s possible that you may not be able to run some of these tests depending on your specialty or the scope of your practice, so document what tests you’ll need to order or refer the patient for. [6]
    • From here on out, it’s all about reframing and revising your working diagnosis until you have enough evidence to reasonably confirm your suspicion.
7

Refer the patient to specialists, if necessary.

PDF download Download Article
  1. Sometimes this is straightforward. If you think it’s possible that the patient is suffering from a neurological disorder and you’re a general practitioner, you’d refer them to neurologist, for example. However, you may need to refer the patient to multiple specialists if you aren’t sure which biological system is to blame here. [7]
    • Refer the patient to specific specialists whom you know to be adept and easy to work with.
    • If you find yourself wondering whether a referral is necessary or not, just refer the patient. It’s better to be safe than sorry, and a second set of eyes is often very helpful.
  2. Advertisement
8

Communicate your diagnosis to the patient.

PDF download Download Article
  1. Explain your reasoning by drawing on everything you’ve learned thus far. If you aren’t super confident in your working diagnosis, that’s okay. Just tell them where your head as it and address the potential paths forward, including what you plan on doing to gather more information. [8]
    • Point out the tests that were already performed to show the reason for the problem.
    • Explain how these evaluations confirmed your diagnosis and show conclusive evidence.
    • Use factual information, such as test result quotes, to back up your identification of the patient's issue.
    • Identify the organic issues (if any) that influenced the decision for this diagnosis.
10

Confirm the diagnosis through treatment or testing.

PDF download Download Article
  1. You might order bloodwork to look for a hormone imbalance you expect to find, or refer the patient for an X-ray to find a bone break you think there may be. Regardless, order or perform the tests you need until you can either confirm or rule out your working diagnosis.
    • If you confirm your working diagnosis, great! Move on to treatment and explain the prognosis for the patient.
    • If you end up ruling out your working diagnosis, the entire process starts back over again. Use what you learned up to this point to inform your new working diagnosis and continue to gather more information.
    • This entire process can take 3 minutes if it’s straightforward. However, it can take months depending on how complex or elusive the underlying problem is.
11

Explain the treatment options to the patient.

PDF download Download Article
  1. There may be medication you can prescribe to manage the symptoms, or a surgical procedure the patient could undergo to permanently resolve the problem. In any case, it’s up to the patient to choose a course of action now. Explain the pros, cons, and risks of each option. Offer your recommendation, but honor the patient’s wishes if they don’t agree with you. [10]
    • If the patient is in denial, you can always suggest they get a second opinion.
    • Doing nothing is also an option depending on the issue. “This should go away on its own” is a totally valid course of action.
  2. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What does a medical diagnosis code mean?
    Arvind Madan
    Nephrologist
    Arvind Madan is a Nephrologist based in Orlando, Florida. With over 23 years of experience, Arvind works as a Physician at Central FL Kidney Specialists and is the Principal Investigator of the research division there. Arvind is certified by the American Board of Internal Medicine, with a sub-specialty in Nephrology. He is an Assistant Professor of Internal Medicine at the University of Central Florida’s College of Medicine. He is also an Assistant Professor of Medicine at Orlando College of Osteopathic Medicine (OCOM). He received his MD from Maulana Azad Medical College at Delhi University and completed his residency at Nassau County Medical Center.
    Nephrologist
    Expert Answer
    So, the code for the medical diagnosis would be an ICD-10 code. Now, to give one example, if you are to diagnose a patient with chronic kidney disease, stage 3, the code will run N18.3. If you are not sure of the correct code, you can easily get it online by searching for the condition. There are two major advantages related to the use of ICD-10 codes. First, it is a fact that this might be easier psychologically on the patient; the patient may not need to know exactly what is wrong with them, and this might just spare him or her from undue stress. Second, most insurance companies want and need ICD-10 codes, and pharmacists prefer them; thus, this makes for an easier approval process. Example: Instead of writing "hypertension," use the code I10. This way, they are assured of clarity and compliance about medical records and insurance claims.
Ask a Question
      Advertisement

      Tips

      • Remember that patient-related documentation may be used in court cases, so keep it factual.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings


      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about improving your medical skills, check out our in-depth interview with Arvind Madan .

      About This Article

      Thanks to all authors for creating a page that has been read 66,764 times.

      Reader Success Stories

      • Gregory Taylor

        Dec 23, 2017

        "This information has been very helpful. It is helping me put into words a medical condition which is about 60 years ..." more
      Share your story

      Did this article help you?

      Advertisement