13 Ways to Stop TV Sound Vibration & Buzzing Speakers

What to do if your TV audio makes a buzzing sound

Co-authored by Adam Paris and Travis Boylls

Last Updated: April 4, 2025 Fact Checked

Are your TV speakers causing excess vibration or buzzing noise? This can be annoying and sound terrible. There are many reasons this may be happening as well as a few things you can do to stop this. This wikiHow article teaches you how to troubleshoot and solve excess TV sound vibration.

How do you fix a buzzing TV?

Place the TV and speakers on a solid, sturdy surface, away from any walls, electronics, or vibrating objects.
Use high-quality cables and wires. Make sure they are securely connected and not worn, frayed, or damaged.
Check your sound settings to make sure the TV is at a reasonable volume and the bass isn't too high.

1

Try restarting your TV and sound system.

Download Article

Power both your TV and audio receiver or soundbar off and unplug them for about 20 seconds. Then plug them back in and see if the problem continues. ^{[1]
X
Expert Source

Jocotra Cathey
TV Mounting Service Expert

Expert Interview}

2

Check the speaker placement.

Download Article

Left and right speakers should be placed an equal distance away from the TV on both sides. The center speaker should be directly above or below the TV in the center. Any rear speakers should also be placed away from the walls. Subwoofers should be placed on the floor about 12 inches away from the wall.

3

Check the shelving, stand, or wall mounts for your speaker.

Download Article

While checking the speaker placement, check the structures that are holding your speakers or TV. ^{[2]
X
Expert Source

Adam Paris
Audio & Visual Installation Expert

Expert Interview} If the speakers are placed on a shelf, make sure there aren't any nearby objects that the speakers are causing the vibration.
- Many wooden shelves use a cardboard back panel that can vibrate from noise. Pull the speakers away from the back of the shelf.
- If you are using a subwoofer, make sure neither the speaker nor the airflow vent is pointed at anything that can vibrate.
- Make sure your shelving, stands, or wall mounts are structurally sound. Make sure they are not wobbly, and that all screws, nuts, and bolts are securely fastened.
- If your shelving or stands are wobbly, you can try applying some blu-tack or felt pads under the legs to stabilize them and dampen the sound. ^{[3]
  X
  Research source}

4

Place a rug under your TV or stand.

Download Article

Place a rug under your television, stand, or shelves to dampen the sound.

5

Turn down the bass.

Download Article

Excess bass can cause speakers to vibrate, especially with low-quality speakers. Television speakers especially are not usually designed to handle a large amount of bass. Go into your television's sound settings and make sure the bass is below 50%. If the problem continues, try lowering it some more.
- If you must have bass, you may want to invest in a decent soundbar or speaker system with a good subwoofer.

6

Turn the volume down.

Download Article

Loud volume can put stress on any set of speakers. ^{[4]
X
Expert Source

Jocotra Cathey
TV Mounting Service Expert

Expert Interview} This is especially true for television speakers, which tend to not be the best quality. In general, you should keep your volume below 75%. If you cannot hear your TV at a lower volume, try turning off any other sound-making devices in the room. This can include fans, air conditioning, appliances, etc.
- If you cannot hear your television even at low volumes, you may want to invest in a better-quality sound system with more speakers.

7

Soundproof the room.

Download Article

If you don't have proper soundproofing materials , carpets, acoustic caulking, rugs, and thick blankets will also help dampen the sound. You can also add some bass traps in the corners of your rooms.

8

Turn down the TV brightness.

Download Article

Excessive TV brightness can cause the capacitors to overload and cause a whining sound. Go into your TV settings and make sure the brightness is set to below 50%. ^{[5]
X
Research source}

9

Check for electrical interference.

Download Article

This can include appliances, lights, and other electronic devices. Try removing or unplugging any nearby electronic devices and see if the problem continues. ^{[6]
X
Trustworthy Source
Federal Communications Commission
Independent U.S. government agency responsible for regulating radio, television, and satellite, and phone communications
Go to source}

10

Secure all cables and wires.

Download Article

Try using different HDMI ports and see if the problem is happening on all ports. Also, try using different cables. If you are using external speakers, make sure the speaker wires are secure on both the receiver end and the speaker end.

11

Use better-quality wires.

Download Article

This also allows for more electronic interference. Inspect your wires to make sure they are not worn, frayed, or damaged. Try replacing your wires and cables with better quality wires and cables and see if this fixes the problem.

12

Remove moisture from your TV panel.

Download Article

Try removing the back panel of your TV and letting it sit for a while. You can also use a dehumidifier to dry out the excess moisture. Reattach your TV panel and see if the problem continues.

13

Consider replacing your speakers.

Download Article

If you've tried everything and your speakers still vibrate, it may be time for an upgrade. Luckily, you can easily replace your speakers with an inexpensive soundbar or speaker system.
- If you notice your speakers are vibrating even with the volume is muted, this is usually a sign that your speakers are not working properly.

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

[1]

Expert Source

Jocotra Cathey
TV Mounting Service Expert

[2]

Adam Paris
Audio & Visual Installation Expert

[3]

[4]

[5]

[6]

Go to source

Log in

13 Ways to Stop TV Sound Vibration & Buzzing Speakers

How do you fix a buzzing TV?

Steps

Try restarting your TV and sound system.

Check the speaker placement.

Check the shelving, stand, or wall mounts for your speaker.

Place a rug under your TV or stand.

Turn down the bass.

Turn the volume down.

Soundproof the room.

Turn down the TV brightness.

Check for electrical interference.

Secure all cables and wires.

Use better-quality wires.

Remove moisture from your TV panel.

Consider replacing your speakers.

Expert Q&A

Tips

You Might Also Like

Expert Interview

References

About This Article

Is this article up to date?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories