Download Article
Download Article
A hydraulic jack is a device used to lift heavy objects, usually cars or trucks. The system works by using oil to grease the internal mechanism. If you’ve just bought a new jack, it won’t have any oil in it and you’ll have to fill it. Jacks also require oil refills every few years. First, remove the cover plate and filler plug. Then fill the chamber with hydraulic jack oil. Finally, follow the procedure to bleed excess air in the system, and your jack should be in good working order.
Steps
-
Position the jack on flat, level ground. This prevents the jack from rolling while you work on it. It also keeps the oil level so you can fill the chamber accurately.- Also place the jack somewhere that can get dirty, just in case you spill some oil. If you don't want oil in your driveway, try doing this in the street.
-
Open the release valve. This lowers the jack so you can access the filler plug. Different jacks may have different release mechanisms. On some jacks, turning the handle counterclockwise lowers the press. On others, you have to press a release valve in a different spot.- If you’re unsure how your jack releases, consult your owner’s manual.
- Keep the release valve open while you work.
Advertisement -
Remove the cover plate if your jack has one. Depending on your jack model, there may be a cover plate that protects the jack’s internal mechanism. Remove any screws holding this cover in place. Then lift the cover off.- Depending on the type of jack you have, the cover plate might come off entirely or just lift up. If the plate comes off, keep it in a safe place so you don’t lose it.
- Usually these screws require a Phillips head screwdriver, but check your particular model to see what type of screwdriver you need.
- Don’t lose the screws you remove. Keep them in a safe place so you can put the cover back on later.
-
Wipe the area around the filler port plug. The filler port is where you will pour the oil. To prevent contamination, use a rag and clean off the area around the filler plug. This keeps dirt out of the oil reservoir.- If your jack is old and there is a lot of caked on dirt around the fill plug, try spraying a hose or pressure washer to remove the gunk first.
-
Remove the filler port plug. This plug is underneath the cover plate on most jacks. Depending on your jack model, the plug might unscrew or just pop out. If it is a screw type, use a screwdriver and turn counterclockwise to remove the plug. If it pops out, insert a flathead screwdriver under the plug and lift it out.- If you can’t locate the filler port, check the owner’s manual for your jack.
- Be careful not to damage the plug when you remove it. If it doesn’t come out easily, stop and reassess what you’re doing. Don’t force it out.
-
Fill the reservoir with hydraulic jack oil. Pour until the oil is just below the lower rim of the fill hole, then stop. Wipe away any excess oil on the rim before replacing the plug.- Use a funnel to avoid spills.
- Do not use any other type of oil besides hydraulic jack oil. Motor oil or brake fluid will not work.
-
Replace the filler plug. Either push the plug back into the hole or screw it back in by turning it clockwise. After the plug is in place, follow the procedure to bleed air out of the hydraulic system.- Do not replace the cover plate yet. You still need to bleed the air from the mechanism before moving on, and the cover plate will get in the way.
- Depending on the jack model, you may also have to keep the fill plug out while you bleed the air. Consult your owner’s manual for the correct process.
Advertisement
-
Confirm that the release valve is open. The release valve should still be open from when you filled the jack with oil, but double check. Open the release mechanism completely to lower the jack. Leave the release valve open while bleeding the air.- The bleeding process is important because air can build up in the hydraulic system while you change the oil. If air is in the system, the jack won't rise properly and could even collapse. Bleeding the jack removes the air and makes the jack function correctly.
-
Pump the handle quickly 10-15 times with the release valve open. This pushes air out of the jack system. With the release valve open, the jack shouldn’t rise while you pump. If it starts rising, double check to make sure the release valve is open.- Some jack models have different variations on how to bleed the air. Check with your owner’s manual to see if your model uses a different method.
-
Close the release valve and test the jack. Turn the handle clockwise to close the release valve, then pump the jack. It should rise in smooth, even motions. Pump it all the way to the top and then release it. [1] X Research source- If the jack is jerky or doesn’t rise to the top, there is probably still air in the system. Repeat the bleeding procedure in this case.
-
Replace the cover plate. With the process done, you can now reinstall all the pieces you removed. Put the cover plate back in place and screw it in with the screws you removed before.
Advertisement
Community Q&A
Search
-
QuestionIs hydraulic oil a hydrocarbon?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerHydraulic oil is often mineral oil based, so it typically contains hydrocarbons. Hydrocarbons can be very dangerous if they enter the lungs, e.g. if someone swallows some of the fluid and accidentally inhales some of it. Always keep hydraulic oil away from children.
-
QuestionWhat can I use as a hydraulic oil substitute in a jack?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerIf you don’t have access to hydraulic jack oil, you can use machine oil or 10/20W lightweight motor oil in a pinch. Automatic transmission fluid will also work if you don’t have any other options. However, it’s not recommended that you use substances that aren’t designed for use in a hydraulic jack, since using the wrong kind of oil can damage the seals in your jack.
-
QuestionWhat is the difference between hydraulic fluid and hydraulic oil?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerHydraulic oil is a type of hydraulic fluid, but not all hydraulic fluids are oils. Other types of hydraulic fluids include water, glycols, and sodium-potassium alloys. Hydraulic oil serves as both a lubricant and a power-transfer medium in hydraulic machinery.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Things You’ll Need
- Screwdriver (flathead or Phillips)
- Hydraulic jack oil
- Rags
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- Never use any liquid besides hydraulic jack oil in your jack. The incorrect oil can cause the jack to collapse.Thanks
- Always check your owner’s manual before carrying out maintenance on your jack. Different models have different mechanisms.Thanks
Advertisement
References
About This Article
Article Summary
X
To add oil to a hydraulic floor jack, start by making sure the jack is completely lowered by turning the jack’s release valve counterclockwise until it’s as low as it can get. Once the jack is lowered, locate the oil filler port, which is on the bottom of the jack’s reservoir near the flat base. Then, remove the plug or screw from the oil filler port, insert the oil can nozzle, and pour the oil in until it starts to leak out of the port. Finally, replace the filler port nozzle to use your hydraulic jack. For more advice, like how to add oil to a hydraulic bottle jack, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 606,473 times.
Reader Success Stories
- "Great presentation - info on bleeding the air allowed me to restore jack to full lift - when I needed it! Yay! for wikiHow." ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Great presentation - info on bleeding the air allowed me to restore jack to full lift - when I needed it! Yay! for wikiHow."
..."
more
"I wasn't sure about what kind of oil was OK. Didn't know about bleeding air out of the jack after filling with oil."
..."
more
"I have been wondering how to refill my trolley jack and how to bleed it. Now I know, thanks to this tutorial."
"I needed to know how to put hydraulic fluid in the floor jack, and now I think I can do it!"
"Worked just like you said. Thanks."
