How to Adjust Shutter Speed

PDF download Download Article
PDF download Download Article

The shutter speed is one of the most basic and fundamental things that goes into taking a great photograph . If the shutter is open for longer, the image sensor will be exposed to light for longer. With a short shutter speed, the image sensor will be exposed to light for less time. Changing the shutter speed by one notch faster or one notch slower is called adjusting it by one “step.” When you raise the shutter speed by one step you’re halving the amount of time that the shutter is open for, and when you lower the shutter speed by one step you’re doubling the amount of time that the shutter is open for.

Changing Your Camera's Shutter Speed

Select "TV" mode and you'll see the default shutter speed on your camera's screen. Move the dial at the top-right corner of the camera to the right to decrease the shutter speed, or left to increase.

Part 1
Part 1 of 2:

Selecting a Shutter Speed

PDF download Download Article
  1. It’s important to adjust the shutter speed to accommodate the light you’re shooting in. Use a shutter speed faster than 1/250 of a second (e.g., 1/500 or 1/1,000) if you’re shooting in bright, natural light. This will adequately expose the image without overwhelming the image sensor with light. A longer exposure time will overexpose the photograph and leave it washed out. [1]
    • Shutter speeds are indicated as fractions of a second. For example, your shutter speed could be 1/125, 1/600, or 1/200. Some cameras will leave out the numerator, and just give the bottom half of the fraction. In this case, you’d be dealing with shutter speeds of 125, 600, or 200.
    • The phrase “exposure time” just refers to the amount of time that the shutter is open. It’s open for a longer period of time for a longer exposure and less time for a shorter exposure.
  2. If you’re shooting indoors or in the evening, use a longer shutter speed. Even if you’re shooting indoors during daylight hours, try a shutter speed of 1/30 of a second or longer (e.g., 1/20 or 1/10 of a second). A longer speed will ensure that enough light to properly expose the photograph hits the image sensor. [2]
    • Anytime you adjust your camera’s shutter speed, use the built-in light sensor to see if you’ll be exposing the image sensor to enough light.
    Advertisement
  3. Photographers very rarely use extremely slow speeds like one, two, or thirty seconds. Only use these speeds if you’re shooting in very low light. For example, if you’re shooting photos of the moon at night, you might need to leave the shutter open for 10–30 seconds. [3]
    • Anytime you have the shutter open for longer than 1/30 of a second, you are going to see some camera shake in the image, since people’s hands cannot hold a camera perfectly still. So, set the camera up on a tripod if you’re using a slow shutter speed.
  4. If you’re capturing a group of people jumping up in the air or taking photos of your friend skateboarding, choose a fast shutter speed to freeze the motion in a still image. This will give the photograph a crisp appearance and capture the exact position of the photo’s subject in the moment that you snapped the picture. If you find that 1/500 is a little too slow, try using 1/1,000 or 1/2,000. [4]
    • When shooting with a fast shutter speed, you typically don’t need to use a tripod. Although everybody’s hands have a very slight natural shake when holding a camera, the shutter won’t be open for long enough to register this slight shaking.
  5. If you’re shooting, say, a field of flowers or a friend running along a beach, you might want to let the photo’s subject blur slightly to give the image a sense of motion and energy. Shooting with a slightly longer shutter speed will capture a little of the subject’s motion while the shutter is open. If the camera doesn’t capture enough blur when you’re shooting at 1/250, try a longer exposure time like 1/100. [5]
    • Make sure that you’re using a tripod when you shoot images that capture motion. If you hold the camera by hand, the background of the shot will also blur as your hands shake slightly. This will give the photo an overall blurry look.
  6. Match your shutter speed with your ISO and aperture setting. Your camera’s aperture setting (also known as the f-stop) determines how wide the small hole is that lets light onto the image sensor and is an important component when trying to properly expose a photograph. Use your camera’s light sensor to figure settings that will lead to a good exposure of your image. [6]
    • The ISO number refers to the film speed that your camera is set to imitate. Lower ISO numbers (e.g., 200 or 400) require more light to expose properly while higher ISO numbers (e.g., 800 or 1,600) require relatively little light.
    • For example, if you’re shooting 800 ISO film (or have your digital single-lens reflux [DSLR] set to 800 ISO), using an aperture of f/2 (wide) and a shutter speed of 1/500 (fast) will allow in roughly the same amount of light as shooting with an aperture of f/11 (narrow) and a shutter speed of 1/15 (slow).
  7. In photography, depth of field refers to how much of the depth of the image is in focus. A “long” depth of field means that the background is in focus, while a “short” depth of field means that only the foreground is focused. Having a short depth of field is ideal for pictures that show only the subject and blur out the background. [7]
    • For example, use an aperture of f/2 and a shutter speed of 1/1,000 to blur out the background and leave only the subject in focus.
    • Conversely, if you want a long depth of field, use a small aperture and a long shutter speed. This will render the entire image—foreground and background—in focus. This is a popular option for landscape photos.
    8. Advertisement
Part 2
Part 2 of 2:

Setting the Shutter Speed

PDF download Download Article
  1. Your camera should have a 1 inch (2.5 cm) wide selection dial on the top-right side that allows you to select how much control you have over the camera’s exposure settings. If you use “Tv” (time value) mode (also known as shutter priority mode), you’ll select the shutter speed and the camera will automatically choose a corresponding f-stop. [8]
    • This is a good selection if you’re a less experienced photographer or don’t have time to match the f-stop to the shutter speed (e.g., if you’re shooting an action shot).
    • If you’re shooting in Tv mode and choose a shutter speed that’s too fast or slow for the lighting conditions, the f-stop will blink or present an error sign to indicate that you can’t use that shutter speed. [9]
    • The terms “aperture” and “f-stop” are used interchangeably; they both refer to the same thing.
  2. If you twist the selection dial to the “M” (manual) mode, you’ll be able to manually select both the shutter speed and the f-stop. This is a good option to use if you want to fiddle with the shot’s depth of field and if you have plenty of time to set up the shot (e.g., if you’re shooting a static subject). [10]
    • Older DSLRs and film single-lens reflux (SLR) cameras may only have a fully manual and a fully automatic mode. In this case, select the fully manual mode to have control over the shutter speed.
  3. Once you’ve selected your shooting mode, take a look at the digital screen on the back of the camera. It should display the shutter speed that the camera is currently set to. In most cases, this will be the default shutter speed. [11]
    • For example, many DSLRs have a default shutter speed of 1/320.
  4. Most models of DSLR have a small, upward-facing dial on the top-right side of the camera, right next to the shutter button. Move the dial one click to the right to slow down the shutter speed by one stop and one click to the left to speed up the shutter speed by one stop. [12]
    • If you’re shooting in Tv mode, the camera will select the f-stop that will best expose your image with the shutter speed you’ve chosen.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What should shutter speed be set at?
    Cory Ryan
    Professional Wedding Photographer
    Cory Ryan is a Professional Wedding Photographer who runs Cory Ryan Photography based in Austin, Texas. She has over 15 years of photography experience and specializes in weddings and events. Her work has been featured in publications such as The Knot, Style Me Pretty, and Junebug Weddings. She received a BA in Media Production and Broadcast Journalism from the University of North Carolina - Chapel Hill.
    Cory Ryan
    Professional Wedding Photographer
    Expert Answer
    The faster your shutter speed is, the more action you're able to freeze into place. If you're shooting kids running around or a bride and groom dancing, you might be able to shoot it at 1/250th of a second, but if you're shooting a race car on a racetrack, it might be more like 1/2000th.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Depending on the make and model of your camera, changing the shutter speed might work slightly differently than the process described above. Consult your owner’s manual for more information.
        Thanks
        Helpful 0 Not Helpful 0
      • The vast majority of SLR cameras being sold are digital. The nice thing about shooting with a DSLR is that you can experiment with different shutter speeds to figure out what looks best without wasting expensive film!
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      4 Easy Ways to Transfer Photos from a Camera to a Computer
      How to
      Blind a Surveillance Camera
      How to
      Use a Fujifilm Disposable Camera
      How to
      Connect a GoPro to a Computer
      How to
      Connect a Camera to a PC
      How to
      Transfer GoPro Videos to an iPhone or iPad over Bluetooth
      How to
      Detect Cameras in a Mirror
      How to
      Install a Security Camera System for a House
      How to
      Install a Hidden Camera
      How to
      Use a Polaroid One Step Camera
      How to
      Understand Camera Exposure
      How to
      Attach a Camera to a Tripod
      How to
      Manually Reset a Blink Camera to Fix Common Issues
      How to
      Install Security Cameras
      Advertisement

      References

      1. ↑ https://www.lightroompresets.com/blogs/pretty-presets-blog/17989804-7-days-to-mastering-manual-mode-what-is-shutter-speed
      2. ↑ https://www.lightroompresets.com/blogs/pretty-presets-blog/17989804-7-days-to-mastering-manual-mode-what-is-shutter-speed
      3. ↑ https://digital-photography-school.com/shutter-speed/
      4. ↑ https://digital-photography-school.com/shutter-speed/
      5. ↑ https://www.lightroompresets.com/blogs/pretty-presets-blog/17989804-7-days-to-mastering-manual-mode-what-is-shutter-speed
      6. ↑ https://digital-photography-school.com/shutter-speed/
      7. ↑ https://digital-photography-school.com/aperture/
      8. ↑ https://youtu.be/mTKXY-zRsPM?t=14
      9. ↑ https://youtu.be/mTKXY-zRsPM?t=63
      1. ↑ https://youtu.be/mTKXY-zRsPM?t=16
      2. ↑ https://youtu.be/mTKXY-zRsPM?t=32
      3. ↑ https://youtu.be/mTKXY-zRsPM?t=40

      About This Article

      Thanks to all authors for creating a page that has been read 43,688 times.

      Reader Success Stories

      • Mo Royds

        Aug 6, 2022

        "Easy to understand, very applicable information."
      Share your story

      Did this article help you?

      Advertisement