Download Article
Simple methods for adjusting your carburetor with no special equipment required
Download Article
You don’t need to be a professional engineer to adjust the carburetor in your vehicle. If you notice your engine is running a bit rough, it’s important that you go in and adjust the air and fuel mixture and find the correct idling speed of your carburetor. Fortunately, this can all be done in just a few simple steps, and it requires no special tools or equipment. Keep reading to learn how to adjust your carburetor so your engine runs smooth and stays in great shape for a long time to come.
Things You Should Know
- Start your engine and let it warm up to its normal operating temperatures.
- Listen to your engine. If the engine runs rich, there will be no unusual sounds, and if it runs lean, it will ping at higher RPMs (revolutions per minute).
- Bring your engine to a lean mixture by turning its screws a quarter-turn at a time, counter-clockwise. Then, slowly bring them back to equal.
- Tighten the idle adjustment screw to increase idling speed and loosen the screw to decrease idling speed.
Steps
Get Car Support Solve Any Problem
Try Asking:
We’re sorry we don’t support the car you are looking for. Please enter its make, model, and year below so that we can add support for it.
Thank you! We’ll review your request and add support for this product as soon as possible. In the meantime, you can ask more questions about the products we currently support.
-
Locate the air filter and remove it. On most cars, you'll need to remove the air filter to expose the carburetor and adjust it. Open the hood and make sure the engine is off before locating the air filter and removing the assembly. Unscrew the wing-nut and any other connectors, and then remove the air filter entirely. [1] X Research source- Depending on your make and model and the engine type, the air filter could be in any number of different places on the engine. Consult the owner's manual or the shop guide for your vehicle.
- On most carbureted cars, the air cleaner housing is attached directly to the carburetor.
-
Find the adjustment screws on the front of the carburetor. These often look like flat-head screws. There should be two screws on the front of the carburetor, which are used to adjust the air and fuel mixture . [2] X Research source- These often look like flat-head screws, and you can use a screwdriver to turn them, adjusting the amount of fuel and air mixing in the carb.
- Some carburetors, such as the Quadrajet found in most GM vehicles, have a special screw and require a specific adjusting tool. The Quadrajet uses a Double "D" carburetor adjusting tool.
- Other carburetors may have a 4 corner idle mix adjustment and will therefore have 4 idle mixture screws.
Advertisement -
Start the engine and let it warm to normal operating temperature. Check the temperature gauge to know when it's at the appropriate running temperature. Then, listen to the sound of the engine to get some sense of the adjustments that need to be made.- An engine that runs lean will ping at higher RPM (revolutions per minute) when the throttle is open, as if you were flooding a gear. In this case, more gas needs to be added to the mixture.
- An engine that runs rich won't necessarily make a change in sound, but you'll be able to smell it. In that case, reduce the amount of gas. An engine that runs too rich at idle will cause the plugs to be fuel-fouled, leading to a vehicle that is harder to start cold.
-
Adjust both screws equally and find the right mixture. Adjusting the carburetor is a lot like tuning a guitar. Use a screwdriver to turn the screws equally, smoothly, and slowly until you find the sweet spot. Regardless of whether or not the engine is running too rich or too lean, bring it down to a very lean mixture by turning both screws a quarter-turn at a time, counter-clockwise, then slowly bringing them back up to an equal and smooth mixture. [3] X Research source- Listen to the engine to know when you’ve found the right balance. The engine should purr smoothly once you’ve found the right mixture. Any raggedness or rattling is a sign of too lean a mixture. Keep turning until you find the sweet spot.
- Use a scanner to check the air-fuel mixture of the vehicle to help you get the right adjustment. [4]
X
Expert Source
Hovig Manouchekian
Auto Repair & Design Specialist Expert Interview. 23 February 2021.
-
Replace the air filter assembly . When you've got the carburetor adjusted, put the air filter back on and you're ready to roll.- If you need to adjust the idle speed as well, wait to put the air filter back on until you're finished.
Advertisement
-
Remove the air filter to access the carburetor. Make sure the engine is off before locating the air filter and taking it out. Unscrew the wing-nut and any other connectors, and then remove the air filter entirely. [5] X Research source- Consult the owner’s manual or shop guide to find out the exact location of your air filter, since it can vary depending on your make and model and engine type.
- On most carbureted cars, the air cleaner housing is attached directly to the carburetor.
-
Find the idle adjustment screw. There is an idle speed screw that adjusts the opening of the throttle plate, and an idle mixture screw that limits the flow of fuel at idle. You want to adjust this second screw. As always, consult the owner's manual or shop guide for your make and model, if you can't find the screws. [6] X Research source -
Start the engine and let it warm to running temperature. Just as you did with the fuel/air mixture, let the engine warm up some to make sure you're adjusting at actual running condition. [7] X Research source -
Turn the idle adjustment screw half a turn clockwise to tighten. Turn the screw clockwise, no more than a half-turn, and listen to the engine. Most owner's manuals will have an optimum speed to set the idle, though you have some wiggle room if you prefer it higher or lower. Consult you owner's manual for the number and consult the tachometer as you adjust. [8] X Research source -
Listen to the car's engine for sounds of roughness and readjust if necessary. It should take about 30 seconds for the engine to adjust to the change you made, so wait a bit before making another adjustment. Make slow turns and listen closely to the response. -
Replace the air filter and finish the job. When you've got the idle adjusted to the proper specifications, or to your own preferences, kill the engine and replace the air filter to finish the job.
Advertisement
Expert Q&A
Search
-
QuestionHow do you tell if a carburetor is rich or lean?Hovig Manouchekian is an Auto Repair and Design Specialist and the Manager of Funk Brothers Auto, a family-owned business operated since 1925. With over 30 years of experience in the automotive industry, Hovig specializes in the process of auto repair and maintenance. He is also very knowledgeable in common automotive issues and needs including engine repair, battery replacement, and windshield accessory and maintenance. Hovig's knowledge and hard work have contributed to Funk Brothers Auto winning Angie's List Super Service Award for five consecutive years.Take the vehicle to a mechanic and have it scanned to check the air-fuel mixture of the vehicle. Then, there's special tooling you can use to get those readings adjusted properly.
-
QuestionHow do you maintain a carburetor?Hovig Manouchekian is an Auto Repair and Design Specialist and the Manager of Funk Brothers Auto, a family-owned business operated since 1925. With over 30 years of experience in the automotive industry, Hovig specializes in the process of auto repair and maintenance. He is also very knowledgeable in common automotive issues and needs including engine repair, battery replacement, and windshield accessory and maintenance. Hovig's knowledge and hard work have contributed to Funk Brothers Auto winning Angie's List Super Service Award for five consecutive years.Inspect the carburetor for carbon buildup—they're notorious for that. If there is buildup, you'll need to clean it.
-
QuestionHow do I identify two screws in a carb that's idle mixture and idle screw?Community AnswerThese screws usually are in the place where the fuel lines lead to the carburetor. If not, refer to your service manual or search online for the part number.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Tightening the idle adjustment screw increases idling speed while loosening the screw decreases idling speed.Thanks
- If after adjusting the idle mechanism, the engine does not run smoothly, go back to making air and fuel adjustments and repeat the steps for both air and fuel and idling adjustments.Thanks
- If your car is equipped with a tachometer, you can use this as a tool to adjust idling speed (revolutions per minute or RPMs). Check your owner's manual for the correct RPMs.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Remember that when you are working on a carburetor, you are working with a fuel source. Take all necessary precautions for working around gasoline, such as wearing gloves and protective eyewear. [9] X Research sourceThanks
- Keep in mind you are also working on a running motor. You can seriously injure yourself or damage your engine if you are not careful. Work slowly and thoughtfully and make sure your clothes don't have any hanging strings or cords that could catch in the engine. [10] X Research sourceThanks
Advertisement
Things You'll Need
- Flat-head screwdriver or special adjustment tool for your carburetor
- Pliers or vise grips
- Paper towels
- Fire extinguisher in case of emergencies
References
- ↑ https://www.championautoparts.com/en-gb/support/installation-guides/filters/engine-air-filters.html
- ↑ https://www.fixmyoldride.com/replace-or-rebuild-a-carburetor.html
- ↑ https://www.enginebuildermag.com/2016/03/understanding-how-to-tune-carburetors/
- ↑ Hovig Manouchekian. Auto Repair & Design Specialist. Expert Interview. 23 February 2021.
- ↑ https://www.championautoparts.com/en-gb/support/installation-guides/filters/engine-air-filters.html
- ↑ https://www.vanguardengines.com/na/en_us/support/faqs/browse/adjusting-the-carburetor.html
- ↑ http://www.clarks-garage.com/shop-manual/fuel-08.htm
- ↑ http://www.clarks-garage.com/shop-manual/fuel-08.htm
- ↑ https://porterchester.edu/news-events/important-auto-shop-safety-tips
About This Article
Article Summary
X
Before adjusting your carburetor, make sure to remove your car’s air filter so you can access the carburetor. Then, start your car and let it warm up. When it's at running temperature, find the 2 screws on your carburetor that adjust the air and fuel mixture. You can then use a screwdriver to adjust both screws ¼ turn at a time until your engine purrs smoothly. To adjust your idle speed, find the idle mixture screw that limits the flow of fuel at idle. Give it no more than half a turn clockwise, adjusting it just until your engine idles smoothly. To learn how to tell whether your engine is running lean or rich and how to correct it, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,318,812 times.
Reader Success Stories
- "Adjusting carburetor. Nice clear pictures. Directions were easy to follow. Now my car runs great. Thanks for your great tips. " ..." more
Advertisement
92%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Adjusting carburetor. Nice clear pictures. Directions were easy to follow. Now my car runs great. Thanks for your great tips. "
..."
more
"This was very useful in getting my head around adjusting the carb on my motorcycle. Thanks."
"It's been a long time since I worked on my car. Your article helped revive my memory."
"I have never done this before, now I can do it like a professional."
"The information here was simple and easy to follow. A great help."
