How to Build Your Own Fishing Pond

PDF download Download Article
PDF download Download Article

Spending time fishing is a great way to take in the fresh air and get some dinner for later. And if you have the energy and determination, you can make a fishing pond in your backyard all on your own. Just select a location, determine your pond's size, and purchase the proper materials so you can start creating it and adding your fish!

Part 1
Part 1 of 4:

Planning Your Pond Location

PDF download Download Article
  1. Start by deciding how much of your yard you're willing to devote to a pond. Afterward, multiply the length and width of the area to get the square footage. From here, you can determine how many fish you can accommodate by estimating that every 1 inch (2.5 cm) of fish requires 1 square foot (0.093 m 2 ). [1]
    • For instance, if you plan to add 10 fish that are each 5 inches (13 cm) in length, the pond should be at least 50 square feet (4.6 m 2 ).
    • If you install a filtration device, you can allow 2 inches (5.1 cm) of fish per square foot. Otherwise, don't break the 1 inch (2.5 cm) rule.
  2. Contact your local building department and ask how far the pond must be from property lines. Afterward, contact the local environmental department and ask about relevant regulations. Depending on where you live and the size of your pond, you might need to obtain a permit. For example, in Idaho, you need a Private Fish Pond Permit, which is free but must be renewed every 5 years. [2]
    • Ask about free meetings from a certified pond consultant. They can help you determine how to best create a pond and consider variables like available soil types and potential rainfall.
    • Determine if you need a fence around your pond. In some areas, local codes require fencing for ponds deeper than 18 inches (46 cm).
    Advertisement
  3. Ponds should be placed in a region that is exposed to sunlight during the morning and shade in the afternoon. This will keep the water temperature cool and prevent algae blooms. [3]
    • Avoid placing your pond under trees. Although this is great for shade, it will quickly clog the pond with seeds, leaves, or needles. Always factor in young trees growing nearby and estimate where their branches will grow.
    • Don't situate your pond in a location where water runs off or it will be at a higher risk of pollution.
    • Make sure you have a waterproof ground-fault circuit interrupter (GFCI) outlet outside your home to power your pump. It should be about 10 ft (3.0 m) from the pond.
  4. Squeeze a handful of soil into a ball, throw it into the air, and catch it. If it breaks apart, the soil is not suitable. If it stays together, dig a hole to your waist and fill it to the top with water in the morning. In the evening, top the hole off with water and cover it with a board. If most of the water remains the next day, the soil is suitable for a pond. [4]
    • If you only have space in a location that isn't suitable for ponds, cover the hole with a layer of plastic sheeting, sand, or concrete. This will prevent the pond's water from being absorbed into the soil.
    • Purchase plastic sheeting, sand, and concrete from home hardware stores.
    EXPERT TIP

    Scott Johnson

    Landscape & Design Consultant
    Scott Johnson is the Owner and Lead Design Consultant for Concrete Creations, Inc., an award-winning landscape and design company based in the San Diego, California metro area. He has over 30 years of experience in the pool and landscape construction industry and specializes in large estate outdoor environment construction projects. His work has been featured in San Diego Home & Garden Magazine and on Pool Kings TV Show. He earned a BS degree in Construction Management with an emphasis in Architecture and CAD design from Northern Arizona University.
    Scott Johnson
    Landscape & Design Consultant

    Our Expert Agrees: Before you build a fishing pond, check your soil type. If the soil is sandy or loam, you'll likely be able to dig the pond yourself. If it's mostly rocky, you might have to hire someone to excavate the area for you.

    5. Advertisement
Part 2
Part 2 of 4:

Creating Your Pond

PDF download Download Article
  1. Head to a local home hardware store to purchase a kit, which should contain a water liner, pump, and sometimes accessories like silk water lilies. Remember that each one is designed for specific sizes. For example, the smallest is typically 9 square feet (0.84 m 2 ) and designed for 84 gallons (320 L). If you're installing the pond without professional help, don't invest in a kit for ponds deeper than 18 inches (46 cm) and longer than 6 feet (1.8 m). [5]
    • Select a kit that fits local fishing pond regulations and the location you have selected.
    • If you'd like, you can also purchase the pond liner and pump separately.
  2. Dig a hole at least 2 to 3 feet (0.61 to 0.91 m) deep. Use the length and width measurements of your pond to determine the hole size. In standard regions, 2 ft (0.61 m) is the minimum depth for ponds that harbor fish. If you live in an extreme northern region, the hole should be at least 3 ft (0.91 m). Always start by thrusting your shovel straight down and wiggling it forward and backward and side to side—this will loosen the soil. [6]
    • Grip the middle of the shovel with your non-dominant hand and the top of your shovel's handle with your dominant hand.
    • Create a pond depth between 6 inches (15 cm) and 4 feet (1.2 m) to encourage other forms of wildlife like toads, frogs, salamanders, and ducklings.
    • If the depth of your hole is uneven, be sure that at least 40 to 50 percent of the pond is the deeper region.
    • Call 811 to locate utility lines in your area and be sure not to dig your pond's hole near any lines or pipes.
  3. The shelf should be about 18 inches (46 cm) wide and 18 inches (46 cm) below the surface of the water. This is for plants and also provides a step for anyone who falls into the pond. [7]
    • Bring any excess soil to a landfill or place an online classified for it. If you bring it to a landfill, call your city's offices beforehand to determine sanitary requirements for the soil.
  4. With the help of a friend, pull the liner loosely over across the hole. Be sure there is even overlap on all of its sides. Now, weigh down the perimeter with small flat bricks or stones. If you don't purchase a pond kit and need to purchase liner separately, calculate the length and width using this formula: (length or width) + (2 x pond depth) + 2. Afterward, multiply the length and width together to get the total square footage. [8]
    • Consider a pond that is 3 foot (0.91 m) deep and both 7 feet (2.1 m) long and wide. The calculation for both length and width is 7 + (2 x 3) + 2, which equals 15. This means that the square footage calculation is 15 x 15, which is 225—the area in square feet that your water liner must cover.
    • Ethylene propylene diene terpolymer (EPDM) liner is more expensive but more flexible, while polyethylene (PE) and reinforced polypropylene (RPP) line are cheaper but thicker and harder to work with.
  5. Use a garden hose to fill your pond with water and adjust the liner to align with the sides of the pond as it fills. Start removing the stone weights as the pond continues to fill to prevent the liner from overstretching. Be sure that the water is dechlorinated. If you can't, allow the water to sit in your pond for at least 1 day to settle and let the chlorine leave the water into the air. This will prevent your fish from being harmed. [9]
    • Trim off any extra liner with sharp scissors or a utility knife when the pond is full.
    • Purchase a dechlorinator from big-box stores or home hardware stores.
    • Skip this step and let your hole fill up with rainwater if you live in an area with frequent rain.
  6. GPH stands for gallons per hour. If you bought a fishing pond kit, the pump provided will be indicated for the size of the kit. Attach the feet to the pump to secure it to the pond floor and place it into the middle of the pond. Now, connect it to a waterproof (GFCI) outlet and turn it on. If the water flow is too much, adjust the rate on the pump. [10]
    • If you're buying your own pump, make sure it can pump the appropriate GPH. For example, if your pond is 225 square feet (21 square meters), the GPH should be at least 225.
    • You can also control water flow using the nozzles provided with your pump.
    • Purchase a unit with the lowest wattage for the cheapest electrical costs.
    • Hire a contractor to install heavy-duty pond pumps for larger ponds.
  7. Place your air filter on a level surface in a shaded area that is above your pond's water line. Connect the airlines to the filter and extend them toward the edge of the pond. Always connect the included check valves to the airlines. Finally, place the air stones evenly around your pond and connect the airlines to them. Be sure the arrows on the check valves point in the same direction as the stones.
    • Connect your filter to a GFCI protected outlet.
    • Move air stones to shallow areas of the pond during the winter.
    • Installation instructions vary by product—always follow the manufacturer's instructions.
  8. Proper oxygen circulation helps promote the longevity of your fish and improve the health of your water system. Always choose a product designed for your pond's depth. Most systems are installed by connecting airlines to your diffuser, placing the diffuser at the bottom of the pond, and connecting the airlines to an air compressor. [11]
    • Always follow the manufacturer's instructions for your diffuser.
    9. Advertisement
Part 3
Part 3 of 4:

Adding Plants and Fish

PDF download Download Article
  1. Many fish eat wetland plants in their natural habitat. To anchor a plant without damaging its roots, take the roots in your hand and make a beak with your fingers around them. Sink your hand into the soil while covering the plant's roots and then open your fingers. This will ensure that the roots spread out before the cover settles over them. [12]
    • Arrange your plants in clusters of 2 to 3 so that baby fish can hide from larger predators that can (and will) eat them.
    • Try plants like cattail, lotus, iris, and water hyacinth.
    • Position the plants both in the center of the pond and along the hole's shelf. When placing ponds in the center, ensure a few feet of space between them to prevent crowding.
  2. Letting the water settle is especially crucial for water that hasn't been treated to remove chlorine. When adding your fish, net them and gently dump them into your pond. [13]
    • Acclimatize your fish to the new water before putting them into the pond. Do this by putting them into a tub or bucket with their original water, then gradually adding your pond water until they are breathing almost pure pond water.
  3. Get several pond fish to start. Try to get more than 1 species, and more than 1 of each species. This ensures that your pond has diversity and your fish can reproduce and make more fish. If you're planning to eat your fish, make sure they're an edible species. Include cleaners such as crawdads (crayfish) to keep the bottom of the tank clean and make sure they have plenty of rocks to hide under. [14]
    • A good rule of thumb is to have at least 3 breeding pairs (3 males, 3 females, all mature).
    • Make sure you have species that won't kill each other right off the bat.
    • You can also buy fish from local pet stores or contact the local wildlife and fisheries department and ask about ordering hatchlings.
    4. Advertisement
Part 4
Part 4 of 4:

Maintaining Your Pond

PDF download Download Article
  1. to keep the population stable. Remember that if you catch every fish, there will be no more to reproduce. Try and replace all the fish you catch with the same or similar fish to avoid disrupting the pond ecosystem. [15]
    • Keep the male and female fish populations as even as possible to encourage breeding.
  2. Clean the water of debris every week. Use a leaf skimmer to remove debris from the surface of the water—just don't go completely under the water with your skimmer. For leaves at the bottom of the pond, use a leaf vacuum. [16]
    • Purchase leaf skimmers and vacuums from home improvement stores.
  3. Splashing and evaporation will eventually decrease the pond's water level. If you get enough rain, you might not have to refill it often. Otherwise, use a garden hose top it off. [17]
    • Attach a dechlorinator to the pond if you're filling it up with city water.
    4. Advertisement


Community Q&A

Search
Add New Question
  • Question
    How big will it have to be if have a large mouth bass in my pond?
    Community Answer
    Not very big; in fact, there are many YouTubers with pet bass that live in healthy states with only 5' x 5' x 2'. As long as the water is deep enough to provide a cool enough area where oxygen can remain within the water, a sturdy largie should thrive.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 13
  • Question
    Do I need to add a water filter to keep the fish alive?
    Community Answer
    It depends on the fish and the levels of oxygen within the water. Some fish need cleaner water than others. Do research on the fish you're putting in and see if they require it or not. A fountain or something like that could help keep the water from getting stagnant.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 18
  • Question
    What is the minimal space to build a fishing pond?
    Yoelvis Pedraza
    Community Answer
    It depends on the fish and the climate you live in. General rule: 1 gallon per 1 inch of fish.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 13
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Situate the pond under an open sky. This way the rain can replenish evaporated water.
        Thanks
        Helpful 0 Not Helpful 0
      • Go to a nearby landlocked (meaning there is no river leading to the outside) pond or lake to see what type of fish and plants there are. Often, the fish and plants in local ponds will be best for your pond because of similar climate.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • If you're covering the hole, use something that is nontoxic to fish or they will die.
        Thanks
        Helpful 35 Not Helpful 15
      • This project will take a lot of time—don't expect it to be done in a day.
        Thanks
        Helpful 5 Not Helpful 1
      • Use a bubbler in wintertime or the fish will die.
        Thanks
        Helpful 4 Not Helpful 1
      • If you don't have both genders, they can't reproduce. This means that after the first generation dies, you'll have no more fish.
        Thanks
        Helpful 3 Not Helpful 1
      • If you don't put in plants, your fish will not have much cover to protect them from predators. In addition, organisms that live amongst these plants will provide food for your fish.
        Thanks
        Helpful 3 Not Helpful 1
      Advertisement

      Things You'll Need

      • Pond kit
      • Shovel
      • Water
      • Plants
      • Fish
      • Liner
      • Large rocks

      You Might Also Like

      How to
      Repair a Pop up Sprinkler Head
      How to
      Build a Pond Filter System
      How to
      Build a Concrete Pond
      How to
      Make a Backyard Fish Pond
      How to
      Remove Algae from a Pond without Harming Fish
      How to
      Build an Indoor Pond
      How to
      Build a Frog Pond
      How to
      Build a Backyard Pond
      How to
      Make a Lotus Pond
      How to
      Make a Mini Pond
      Advertisement

      References

      1. ↑ https://www.dec.ny.gov/outdoor/7975.html
      2. ↑ https://idfg.idaho.gov/fish/private-ponds
      3. ↑ https://www.thisoldhouse.com/ideas/everything-you-need-to-know-to-build-perfect-backyard-pond
      4. ↑ http://www.fao.org/docrep/t0581e/T0581E03.htm
      5. ↑ https://www.thisoldhouse.com/ideas/everything-you-need-to-know-to-build-perfect-backyard-pond
      6. ↑ https://www.familyhandyman.com/garden-structures/fences/how-to-dig-a-hole-pro-tips/view-all/
      7. ↑ https://www.thisoldhouse.com/ideas/everything-you-need-to-know-to-build-perfect-backyard-pond
      8. ↑ https://www.thisoldhouse.com/ideas/everything-you-need-to-know-to-build-perfect-backyard-pond
      9. ↑ https://empressofdirt.net/advice-for-starting-a-new-garden-pond
      1. ↑ https://www.thisoldhouse.com/ideas/everything-you-need-to-know-to-build-perfect-backyard-pond
      2. ↑ https://www.thisoldhouse.com/ideas/everything-you-need-to-know-to-build-perfect-backyard-pond
      3. ↑ https://www.thisoldhouse.com/ideas/everything-you-need-to-know-to-build-perfect-backyard-pond
      4. ↑ https://www.thisoldhouse.com/ideas/everything-you-need-to-know-to-build-perfect-backyard-pond
      5. ↑ https://www.thisoldhouse.com/ideas/everything-you-need-to-know-to-build-perfect-backyard-pond
      6. ↑ https://www.dec.ny.gov/outdoor/7975.html
      7. ↑ https://youtu.be/UdUFFjk1yeI?t=142
      8. ↑ https://www.thisoldhouse.com/ideas/everything-you-need-to-know-to-build-perfect-backyard-pond

      About This Article

      Article Summary X

      To build your own fishing pond, you'll need to provide 1 square foot of space for every 1 inch of fish you plan on having. For example, if you're going to have 10 fish that are each 5 inches long, your pond should be at least 50 square feet. The pond also needs to be at least 2 feet deep, or 3 feet deep if you live in a cold climate, so choose the pond's location wisely. To get started, get a backyard fishing pond kit from a hardware store that includes a liner and pump. To learn how to add plants and fish to your fishing pond, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 410,425 times.

      Reader Success Stories

      • Zulkarnaini Yahaya besse

        Aug 13, 2020

        "My successful story is before I dont know how to create a fish pond but now I do. Thank you for helping me know how ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement