How to Build a Trebuchet (1 Meter Scale)

PDF download Download Article
PDF download Download Article

A trebuchet is a device used in the Middle Ages to launch very heavy objects at opponents during battle. Trebuchets work by using a counterweight system turning the falling energy of the back end into a high speed launch of a heavy projectile. [1] You can build a smaller versions of a trebuchet on your own to learn about the physics behind them. Power tools are involved in the creation of this device so make sure you have the proper adult supervision if necessary.

Part 1
Part 1 of 3:

Building the Base

PDF download Download Article
  1. To build the base, you will need the following tools: hammer, electric drill, 1 inch (2.5 cm) drill bit, 10 nails, 12 wood screws, and a saw. Remember, power tools are dangerous; always use caution and have adult supervision when necessary. The supplies for the actual base include: [2]
    • 2 2 in × 4 in (5.1 cm × 10.2 cm) wood pieces, 36 inches (91 cm) long
    • 2 2 in × 4 in (5.1 cm × 10.2 cm) wood pieces, 12 inches (30 cm) long
    • 2 2 in × 4 in (5.1 cm × 10.2 cm) wood pieces, 23 inches (58 cm) long
    • 1 ⁄ 4 inch (0.64 cm)plywood that is between 20–24 inches (51–61 cm) square
    • 1 piece of flat wood (can be plywood) that is 10–12 inches (25–30 cm) wide and 36 inches (91 cm)long to serve as baseboard
    • 1 inch (2.5 cm) diameter dowel rod, 15 inches (38 cm) long
    • 2 eye hooks
  2. The plywood needs to be cut into triangles. These triangles will serve as supports to stabilize the trebuchet when it is in use. Using a jigsaw or table saw (whichever is available) cut the square from corner to corner through the center. [3]
    • If you don’t have a table saw or jigsaw, many home improvement stores will cut wood for you before you take it home.
    Advertisement
  3. Measure 13 inches (33 cm) from the left end of one of the 36 in (91 cm) long pieces of wood and make a mark. Place the center of the 23 in (58 cm) long piece of wood perpendicular to the 36 in (91 cm) long piece of wood at the mark that you made. [4]
    • Lay one of the triangle-shaped pieces on top of these supports so that the base of the triangle is aligned horizontally with the bottom of the 36 in (91 cm) piece of wood.
    • Attach 1 screw to each corner and 2-3 screws along each side of the triangle.
  4. Use the same process detailed above, but make it in a mirror image. This will ensure that when you build the base, both supports will face the same direction and the wooden triangles will face out. [5]
    • When both sides are constructed, line them up and make sure they are identical mirror images of each other.
  5. Stand the side supports up, making sure the triangle wood pieces face out. Place a 12 in (30 cm) long piece of wood between each side of the ends of the supports. Using the drill, attach the pieces together with 2 screws on each side. [6]
    • At this point, the base is almost finished. You should have a rectangular base with 2 vertical supports.
  6. Measure about 2 inches (5.1 cm) from the top of each arm and drill a hole about 1 inch (2.5 cm) in diameter. Make sure the dowel rod fits through the holes. If it doesn’t, make the holes larger. [7]
    • You don’t want the hole to be too large because you want the dowel rod to be secure.
  7. Place the baseboard on top of the bottom of the base. Evenly space nails nails along the edges and hammer them in to secure it in place. You can also screw the baseboard into place if you prefer. [8]
    • Screw 2 eye hooks into the front end of the trebuchet baseboard about 8 inches (20 cm) apart.
    8. Advertisement
Part 2
Part 2 of 3:

Constructing the Arm

PDF download Download Article
  1. A trebuchet works with a counterweight system. In addition to the materials listed, you will need something heavy to serve as a counterweight. You can use some hand weights, a brick, or a small bucket that you can fill as needed to vary the weight. To build the launching arm of the trebuchet, you will need the following supplies: [9]
    • Hammer
    • 2 in × 4 in (5.1 cm × 10.2 cm) piece of wood, 40 inches (100 cm) long
    • 5 feet (1.5 m) of string
    • 10 in × 6 in (25 cm × 15 cm) piece of cloth to make a pouch
    • 2 eye hooks
    • 1 long thin nail with the head removed
  2. This hole needs to be large enough for the dowel rod to fit through and rotate without friction. Measure 10 inches (25 cm) from the top of the 40 in (100 cm) long piece of wood and make a mark. Make the hole at this 10 in (25 cm) mark slightly larger than the diameter of the dowel rod (1 inch (2.5 cm)). [10]
    • Test the rotation by putting the rod through the 2 in × 4 in (5.1 cm × 10.2 cm) piece of wood. If the 2 in × 4 in (5.1 cm × 10.2 cm) piece of wood rotates without resistance, the hole is large enough.
    • The end closest to the hold is the back end of the swing arm.
  3. One eye hook will serve as the attachment point for the string and pouch while the other eye hook will be part of the trigger. Screw the first eye hook into the very end of the swing arm, on the bottom. Screw the second eye hook into the bottom of the swing arm about 1 inch (2.5 cm) from the end. [11]
    • Hammer the first eye hook into the end until just the loop of the hook is sticking out.
  4. Make sure that the head of the nail has been completely removed. When the trebuchet launches, the string on the nail needs to be able to fly off the nail and it won’t be able to do that if it gets caught on the head. The head can be removed with a Dremel tool. [12]
    • Hammer the nail into the flat end of the swing arm, approximately in the middle.
    • Bend it slightly forward so that the string will stay on until the trebuchet is launched. The angle of the bend will need to be optimized using trial and error launches.
  5. [13] The easiest counterweight to attach is a small bucket. You can vary the weight on the back easily by putting more or fewer rocks inside. Drill a small hole into the back end of the swing arm about 1 inch (2.5 cm) from the end. Feed some string through the hole and tie the bucket in place.
    • You want the bucket to hang vertically down but still be close to the arm. Tie it so that it hangs about 1–2 inches (2.5–5.1 cm) from the top of the arm.
    • Fill the bucket with rocks or heavy pieces of metal.
    • Alternatively, you can attach a heavy weight such as a 20 pounds (9.1 kg) hand weight directly to the end of the arm.
  6. Trim the corners of the 10 in × 6 in (25 cm × 15 cm) piece of cloth so that the shorter edges of the pouch are slightly tapered. This well help contain the object and let it release properly during launch. Make small holes in the middle of the shorter edges. [14]
    • Tie a 27 in (69 cm) piece of string to one end of the pouch and make a small loop at the other end of the string. Hook the loop on the nail at the end of the arm. This piece is longer to account for the loop.
    • Tie a 24 in (61 cm) piece of string to the other end of the pouch. Tie the other end of the string to the second eye hook (the one still sticking out of the wood). The pouch should hang evenly off the back end of the arm when you are done.
    7. Advertisement
Part 3
Part 3 of 3:

Assembling and Using the Trebuchet

PDF download Download Article
  1. To finish the trebuchet and assemble it together, you will need a coat hanger, wire cutters, and some string. These are the final materials necessary to complete the trebuchet. [15]
    • The coat hanger must be made of wire so you can manipulate it for the trigger.
    • If you don’t have wire cutters, find another tool that will cut through the hanger.
    • You can use as much or as little string as you like for the trigger.
  2. Position the swing arm between the two supports of the base and slide the dowel rod in place. This will secure the swing arm in place. Without the trigger in place, the counterweight on the back end will cause the arm to stick up. [16]
    • Again, make sure the swing arm can rotate freely around the dowel rod.
  3. Straighten out a coat hanger and cut a length about 15 inches (38 cm) long. Make a small loop on one end of the wire and attach some string to the loop. Bring the swing arm of the trebuchet down so that the counterweight is in the air. Feed the straight end of the hanger through the first hook on the base, then through the front hook on the swing arm, then through the second hook on the base. [17]
    • Pulling the string releases the swing arm and launches whatever is in the pouch.
  4. With everything set up and ready for launch, you can adjust the lengths of the strings attached to the pouch. Loop the end around the nail at the end of the swing arm and straighten the pouch so that it lies directly on top of the baseboard. [18]
    • You want both sets of strings to be approximately the same length and for the pouch to sit close to the end of the baseboard.
  5. Load the pouch with something round like a tennis ball or baseball. When the cargo is securely in place, stand back and pull the trigger. If the nail is positioned at the correct angle, you should see the ball sail through the air. [19]
    • Alter the angle of the nail as needed to get the best launch distance. Trial and error is the best way to accomplish this.
    • Adding heavier items to the counterweight will allow you launch heavier things and/or launch things a further distance.
    • Don't stand in front of the throwing arm when releasing. It might hit you in the face and cause injury.
    • In early tests, the throwing can be unpredictable; stay clear of all moving parts.
    6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What are the dimensions of the final product?
    Community Answer
    14" x 36" x 27". Well, that's an approximation without counting the lever arm's extra piece that sticks off. The added 2" to the 12" piece is counting the width of the wood it's attached to, which would come out as 14", while the 4" added to the 23" piece of wood would make its measurements 27".
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 7 Helpful 23
  • Question
    How much weight can it throw?
    Community Answer
    It depends on the weights on the other end. Usually you want the counter weight to be 3 to 4 lb more than the projectile. My suggestion is to test different *P-weight to *C-weight ratios. The dowel rod will break if over loaded so if you test it make sure to have extras.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 18
  • Question
    Where can I find the wood pieces?
    Community Answer
    Most hardware stores have wood that is 2" by 4" but longer than you need so you buy that and cut it down to the correct length. If you don't have a hardware store near by try and see if you have a free to scavenge wood dump near by.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 10
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Things You’ll Need

      • Hammer
      • Electric drill
      • 1 inch (2.5 cm) drill bit
      • ~10 nails
      • ~12 wood screws
      • Saw
      • 2 2 in × 4 in (5.1 cm × 10.2 cm) wood pieces, 36 inches (91 cm) long
      • 2 2 in × 4 in (5.1 cm × 10.2 cm) wood pieces, 12 inches (30 cm) long
      • 2 2 in × 4 in (5.1 cm × 10.2 cm) wood pieces, 23 inches (58 cm) long
      • 1 ⁄ 4 inch (0.64 cm)plywood that is between 20–24 inches (51–61 cm) square
      • 1 piece of flat wood (can be plywood) that is 10–12 inches (25–30 cm) wide and 36 inches (91 cm)long to serve as baseboard
      • 1 inch (2.5 cm) diameter dowel rod, 15 inches (38 cm) long
      • 2 eye hooks
      • Small bucket (or small, heavy object to serve as a counterweight)
      • 2 in × 4 in (5.1 cm × 10.2 cm) piece of wood, 40 inches (100 cm) long
      • 5 feet (1.5 m) of string
      • 10 in × 6 in (25 cm × 15 cm) piece of cloth to make a pouch
      • 1 long thin nail with the head removed
      • A coat hanger
      • Wire clippers
      • 1 foot (0.30 m) long piece of string

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • The best location to launch the trebuchet, especially one of this size, is outdoors. Launching indoors can result in property damage.
        Thanks
        Helpful 1 Not Helpful 0
      • Use caution when working with tools: saws, hammers, drills, etc. Wear protective eyewear to prevent accidental injury to the eyes.
        Thanks
        Helpful 1 Not Helpful 0
      • Make sure no one is standing in front of the trebuchet during launch.
        Thanks
        Helpful 1 Not Helpful 0
      Advertisement

      Video

      You Might Also Like

      How to
      Make a Mini Catapult
      Build a DIY Potato Cannon: PVC Spud Gun Instructions
      How to
      Build a Trebuchet
      How to
      Turn Your Hand Into a Rubber Band Gun
      How to
      Build a Pen Gun
      How to
      Build a Strong Catapult
      How to
      Build a Basic Catapult
      How to
      Make a Toy Gun
      How to
      Modify a Nerf Gun
      How to
      Make a Rubber Band Gun
      How to
      Fire a Rubber Band
      How to
      Make a Sling Shot
      How to
      Make a Spear
      How to
      Make a Paper Gun That Shoots
      Advertisement

      References

      1. ↑ http://www.real-world-physics-problems.com/trebuchet-physics.html
      2. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-1.htm
      3. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-1.htm
      4. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-1.htm
      5. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-1.htm
      6. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-1.htm
      7. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-1.htm
      8. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-1.htm
      9. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-2.htm
      1. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-2.htm
      2. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-2.htm
      3. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-2.htm
      4. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-2.htm
      5. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-2.htm
      6. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-2.htm
      7. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-2.htm
      8. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-2.htm
      9. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-2.htm
      10. ↑ http://www.stormthecastle.com/trebuchet/Fast-easy-tennis-ball-trebuchet-part-2.htm

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 568,660 times.

      Reader Success Stories

      • Weston Taylor

        Mar 29, 2017

        "I was failing world history and she gave the extra credit of building a trebuchet, so I did, and now I am passing!"
        Rated this article:
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement