How to Burn Wii Games to Disc

PDF download Download Article
PDF download Download Article

With a modded Wii console, you can rip games from a disc to an external hard drive or flash drive, allowing you to back up all of your games to one place. This is preferable to burning Wii backups to disc, mainly because burned discs do not work in newer Wii consoles. If you do want to burn Wii games, you'll need the image files and an ISO burning program. You'll need a modded Wii with a USB Loader program to play the burned discs.

Part 1
Part 1 of 4:

Modding Your Wii

PDF download Download Article
  1. Install the Homebrew Channel to rip and play games. Whether you plan on ripping games using your Wii or ripping them with your computer, your Wii will still need to be modded in order to play ripped games. You can install the Homebrew Channel using a special exploit called "LetterBomb."
  2. You'll need to be running the final version of the Wii software (4.3) that was released in September 2010. This is required in order for the exploit to work.
    • Select the "Wii" button from the Wii main menu.
    • Select "Wii Settings."
    • Select "Wii System Update" from the third page.
    • Select "Yes" and then "I Accept" to begin downloading and installing the system update.
    • Some games also have a Wii system update. Insert the disc, select the Disc Channel from the Wii menu and the Wii will prompt you to install the update.
    • You can also update your Wii system after successfully connecting it to the internet.
    Advertisement
  3. You'll need an SD card that is 2 GB or smaller in order to successfully mod your Wii. The card should be a standard SD card, not SDHC or SDXC.
    • Check the list at wiibrew.org/wiki/SD/SDHC_Card_Compatibility_Tests if you aren't sure if your card is compatible.
  4. Format your SD card on your computer. Insert your SD card into your computer's card reader. If your computer doesn't have a card reader, you'll need a USB reader. Format the card in FAT32 format by doing the following:
    • Windows - Open Windows Explorer ( ⊞ Win + E ). Right-click on your SD card and select "Format." Choose "FAT32" from the "File system" menu and click "Start" and then "OK."
    • Mac - Open the Disk Utility from the Utilities folder. Select your SD card, then click the "Erase" button. Select "MS-DOS (FAT)" from the "Format" menu and click "Erase" two more times.
  5. This is the address that is unique to your Wii. You can find out the MAC address from the Wii's Settings menu:
    • Click the "Wii" button on your Wii's main menu.
    • Select "Wii Settings" and then select "Internet" from the second page.
    • Select "Console Information" and then write down the MAC address.
  6. please.hackmii.com on your computer's browser. This is the website that will generate a LetterBomb exploit specifically for your Wii.
  7. Each field will get two characters for the MAC address.
  8. If you aren't sure, you can see which version you're running by opening the "Wii Settings" menu again and looking in the upper-right corner.
  9. It doesn't matter if you "Cut the red wire" or "Cut the blue wire," both will download the ZIP file.
  10. This will display the contents. You should see a "private" folder and a "boot.elf" file.
  11. Drag and drop the "private" folder and the "boot.elf" file directly into your SD card. This will place them in the correct locations on the card.
  12. You'll find the SD card port on the front of the Wii, behind the panel that folds down.
  13. You should see a red envelope with a bomb tucked in it. You may need to press the "-" button to go back a day or more to find it.
    • Double-check that the "private" folder and the "boot.elf" file are in the root of the SD card if the LetterBomb does not appear.
  14. You'll see a black screen with white text appear, much like the Command Prompt or PowerShell in Windows.
  15. This will start the installation process.
    • If your Wii remote turns off when the HackMii installation begins, your Wii remote might be too new. Newer Wii remotes will turn off when the hack is detected. You'll need to find a Wii remote made before 2009.
  16. This will let you configure BootMii, which allows the Homebrew Channel to load. [1]
  17. This will add files to your SD card for the BootMii software.
  18. Select "Yes, continue" twice to confirm. This will install the BootMii software.
  19. Select "Yes, continue" to confirm, then select "Continue" when it finishes.
  20. If the Homebrew Channel loads after a few moments, you've successfully modded your Wii. Next up you'll be installing the software necessary to rip games and play backups from an external hard drive or flash drive or from a burned disc. [2]
    21. Advertisement
Part 2
Part 2 of 4:

Installing Backup Software

PDF download Download Article
  1. Format an external hard drive or flash drive on your computer. Plug an external hard drive or flash drive into one of your computer's USB ports. As with the SD card, format it as FAT32, which will allow you to save Wii games and GameCube games. The games you rip or download will be stored on the drive.
    • Windows - For drives that are 32 GB or smaller, open Windows Explorer ( ⊞ Win + E ). Right-click on your drive and select "Format." Choose "FAT32" from the "File system" menu, and click "Start" and then "OK." If your drive is between 64 GB and 2 TB, download FAT32 Format from ridgecrop.demon.co.uk/index.htm?guiformat.htm . Run the utility, select your drive, and click "Start" and then "OK."
    • Mac - Open the Disk Utility from the Utilities folder. Select your drive, then click the "Erase" button. Select "MS-DOS (FAT)" from the "Format" menu and click "Erase" two more times.
  2. This is a homebrew application that will install the necessary system software to install other homebrew system software (IOS files).
    • You can find the installer in various locations online. Perform a Google search for "ios236 v6 installer." The installer will download as a ZIP file.
  3. This program installs system software that changes the way your Wii access storage, allowing you to use USB Loader programs.
    • Download the latest available version from code.google.com/archive/p/d2x-cios-installer/downloads
  4. This is the homebrew program that manages your game backups and allows you to rip games from discs. You can use it to rip Wii games and GameCube games.
    • Download the Cfg_USB_Loader_70.zip file from code.google.com/archive/p/cfg-loader/downloads .
  5. Extract these files to your card first to create the folder structure that the other two ZIP files will use.
    • Insert the SD card from your Wii into your computer.
    • Double-click the Cfg_USB_Loader_70.zip and navigate to the "inSDroot" folder. You'll see two folders: "apps" and "usb-loader."
    • Drag both of these folders into the root of your SD card.
  6. Once you've copied your CFG Loader files, you can double-click each of the other ZIP files you downloaded and drag the folders inside to the new "apps" folder on the SD card.
  7. Visit gwht.wdfiles.com/local--files/usb-loader/meta.xml in your browser. Press Ctrl + S (Windows) or ⌘ Command + S (Mac) and save the file as "meta.xml."
  8. Open this directory on your SD card and drag your new meta.xml file into it. Confirm that you want to Overwrite or Replace the existing file.
  9. This will open the file in your browser.
  10. Enter these two options, each on a new line at the bottom:
    • ntfs_write = 1
    • fat_split_size = 0
  11. This will activate the configuration file and ensure that CFG Loader uses your new settings.
  12. This will read your SD card and show the installers in the Homebrew Channel.
    • Make sure any GameCube memory cards you may have inserted have been removed.
    • Make sure your Wii is connected to the internet so that it will be able to download the necessary files.
  13. This will start the installer and a bunch of white text will appear on the screen, much like the Command Prompt or PowerShell in Windows.
  14. IOS236 will begin installing.
  15. This will download the essential files.
  16. Files will begin installing, which should just take a few moments.
  17. Regardless of what you're planning on using the custom firmware for, do not press "1." [3]
  18. Press "Load" to start it up.
    • Press any button on the disclaimer screen to continue.
  19. Use the text menus at the top of the screen to set your installation preferences:
    • Select "<d2x v6>" from the "Select cIOS" menu.
    • Select "<56>" from the "Select cIOS base" menu.
    • Select "<248>" from the "Select cIOS slot" menu.
    • Select "<21006>" from the "Select cIOS revision" menu.
  20. This will install d2x using the settings you entered. The installation may take a little while to complete.
  21. You'll need to install it again with slightly different settings.
    • If you are still in the installer after some settings have been entered, press "A" to move on to the next step of the installation.
  22. Enter the following, slightly different installer settings:
    • Select "<d2x v6>" from the "Select cIOS" menu.
    • Select "<57>" from the "Select cIOS base" menu.
    • Select "<247>" from the "Select cIOS slot" menu.
    • Select "<21006>" from the "Select cIOS revision" menu.
  23. This will install d2x again in Slot 247. You'll need it installed in both slots before you can use CFG Loader. [4]
    24. Advertisement
Part 3
Part 3 of 4:

Creating and Playing Game Backups

PDF download Download Article
  1. Plug this in before you launch CFG Loader for the first time. Use the bottom USB port on the back of the Wii.
    • If you're prompted by your Wii to format the drive, select "Cancel." If you click "Format," you'll need to go back to your computer and format it as FAT32 again.
  2. Select "Load" to start the program.
  3. This will set CFG to load backups from your external hard drive or flash drive.
    • When prompted to select your partition, you should only have one available. Select it to continue.
  4. This will launch CFG Loader with your settings.
  5. You'll want to save your device and IOS settings so you're not prompted for them each time you start: [5]
    • Point at the bottom of the screen to open the menu.
    • Select "Settings" and then "System."
    • Select "Save Settings."
  6. You can copy any Wii game or GameCube game by using CFG Loader. Insert the disc and it will appear in the CFG Loader program.
  7. You'll be using this homebrew program to rip the games from your Wii and GameCube discs to your external hard drive or flash drive.
  8. This will open the installation screen for the game that is inserted.
  9. This will begin copying the game files from your disc to your external hard drive or flash drive. This may take a while to complete, especially for newer, larger games.
  10. Once you have some games installed, they'll appear in the main window of CFG Loader. Select one to view details and launch it.
  11. With the game selected, press "A" to start playing. You'll see some text as the game loads, and then it will start.
  12. You can keep installing games from any disc, legitimate or burned. All of the games will be added to your external hard drive or flash drive, and you won't need the discs to play them.
    13. Advertisement
Part 4
Part 4 of 4:

Burning Games to Disc

PDF download Download Article
  1. Besides the convenience that a USB Loader program and an external hard drive or flash drive provide, newer Wii models cannot read DVD+Rs. This means that a burned disc is useless on Wiis that were made in 2008 or later.
    • If you download games, you can copy them to the external hard drive or flash drive that the USB Loader uses and they will appear in your USB Loader program library. You don't need to burn them, just to rip them with your Wii.
  2. If you do want to burn games to disc instead of using your USB Loader, you'll need the game image files. There are a couple of ways you can obtain these:
    • Wii and GameCube ISO files can be created by placing a legitimate disc into your disc burner and using a disc ripping utility such as InfraRecorder or a paid one like MagicISO. This is a safe way to rip games with your computer.
    • If you followed the above methods, you can use games that you've installed to your external hard drive or flash drive with your USB Loader program. Plug the external hard drive or flash drive into your computer and open the "games" directory. Games will be named by their GAMEID, so perform a quick Google search if you're not sure which is which. Drag the file you want to your computer. It may take a while to copy.
  3. Convert image files copied from your external hard drive or flash drive . If you ripped games using your Wii and copied the files to your computer, you'll likely notice that the files are in WBFS format. This will need to be converted to ISO before you can burn it:
    • Visit . wbfstoiso.com and download the free program. Run the installer after downloading it and follow the prompts. No adware will be installed.
    • Open WBFS to ISO and select your WBFS file. You can click the "Open" button to browse for it.
    • Click "Convert" to begin converting the file. This may take a while to complete. You'll find the ISO file in the same location as your WBFS file.
  4. imgburn.com and download ImgBurn. This disc burning utility will allow you to burn the ISO file to a blank DVD+R. Download the latest version from the ImgBurn website.
  5. Double-click the installer to begin the installation.
  6. After you select the location to install ImgBurn, you'll see a screen for the Ask Toolbar. Make sure to uncheck all of the boxes before proceeding.
  7. Once the installation is finished, launch ImgBurn from the shortcut on your desktop.
  8. This will open the disc writer tool.
  9. You'll need to have a disc burner installed for ImgBurn to work. Be aware that if your Wii is newer than 2008, the burned discs will not work.
  10. Click the Browse button to navigate to it, or drag it into the window.
  11. To help ensure that the burn process works, select a slow writing speed such as 1X. This will result in a longer burn but will increase your chances of the disc working.
  12. This will begin writing the file to your disc.
  13. This may take a while, especially for larger games. The disc will eject when it is finished.
  14. Once the disc is finished burning, you can insert it in your Wii's disc drive, and run it with your USB Loader program. This will allow you to play it without having to install any additional hacks. See the previous section for details.
    15. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do you know if your Wii was made before 2008?
    Community Answer
    On the model number on the bottom of the Wii, if it starts with LB or LU, it was made in 2006/2007. Anything else is 2008, and cannot read DVD.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 16 Helpful 39
  • Question
    Will this work with a Wii U?
    Community Answer
    No, but it will work on the Virtual Wii on Wii U.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 17 Helpful 15
  • Question
    Why am I getting an error when I try to play the games I have burned?
    Community Answer
    It is probably because it is unlicensed, and as the Wii console reads, it detects no license and concludes it is pirated, illegal or an unauthorized game copy.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 11
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      You Might Also Like

      How to
      Use the Wii Controller
      How to
      Play Wii Games on the Wii U
      An In-Depth Guide to Back Up and Play Wii Games from USB
      How to
      Install Homebrew on Wii Menu 4.3
      How to
      Pair a Wii Remote to Your Wii, Wii U, or Windows PC
      How to
      Bowl an Easy Bowling Strike in Wii Sports
      How to
      Fix a Wii Remote That's Not Working: 15 Troubleshooting Tips
      How to
      Hook up a Wii
      How to
      Set Up Your Nintendo Wii
      How to
      Do a Fast Ball in Tennis in Wii Sports
      How to
      Synchronize a Wii Remote to the Console
      How to
      Unlock Every Super Smash Bros. Brawl Character
      How to
      Play New Super Mario Bros. Wii
      How to
      Play Wii Games on PC: Installing & Using Dolphin Emulator
      Advertisement

      References

      1. ↑ http://wiibrew.org/wiki/BootMii
      2. ↑ http://www.makeuseof.com/tag/set-wii-homebrew-letterbomb/
      3. ↑ http://gwht.wikidot.com/ios236
      4. ↑ http://gwht.wikidot.com/d2x
      5. ↑ http://gwht.wikidot.com/usb-loader

      About This Article

      Article Summary X

      To burn Wii games to disc, start by downloading the game image files from a torrent site. If you ripped games using your Wii and copied the files to your computer, the files will need to be converted to ISO, so visit wbfstoiso.com and download their free program. Next, visit imgburn.com and download ImgBurn to burn the ISO file to a blank DVD. Once the installation is done, launch ImgBurn from the desktop shortcut, and select “Write image file to disc” from the menu. Insert a blank DVD, select your Wii ISO file as the source, pick a low write speed, and click the “Burn” button. To learn how create and play game backups on your Wii, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 1,514,632 times.

      Did this article help you?

      Advertisement