How to Caulk

PDF download Download Article
PDF download Download Article

Caulk is a sealant used to bridge a gap between building materials. It has many different uses. Most commonly, caulk is used to repair flashing on a roof, seal around bathtubs and sinks, weatherize doors or windows, fill expansion joints and install or hide unsightly cracks in crown molding. There are two main kinds of caulk – silicone and acrylic latex. It’s important to choose the right caulk for your particular project, since the two types operate differently. By using the ideal caulk type and applying it with the proper tools, caulking can be a home improvement project you complete without hiring a professional.

Method 1
Method 1 of 3:

Preparing the Surface

PDF download Download Article
  1. There are two main types of caulk – silicone and acrylic latex. Silicone caulk is a completely waterproof and flexible sealant. It will bond with a lot of different kinds of surfaces.

    Silicone is a good choice if you’re caulking outdoors, or wet indoor spots like around shower stalls and bathtubs. It’s quite expensive and doesn’t do well in high-traffic areas. [1]
    • Silicone caulk is ideal for areas of high moisture that need to remain mildew-free.
    • Silicone caulk can also be useful when you need to adhere surfaces, like fastening countertops to walls or putting a top on a vanity.
    • Silicone caulk is typically only available in three shades – clear, white, and almond. [2] Silicone caulk cannot be painted over.
  2. Acrylic latex caulk is easier to use and cheaper than silicone. It can be used for a wider range of projects and it comes in a rainbow assortment of colors to match bathtub and sink glazes.

    Acrylic latex is water-based so it’s best used indoors. It is not as durable as silicone caulk and won’t last as long. [3]
    • Since acrylic latex is water-based, it is possible to paint over it. [4]
    • Acrylic latex caulk shrinks up more than silicone. It also dries much harder.
    • Unless specifically noted on the packaging, latex caulk isn't suitable for any exterior surfaces.
    • Acrylic latex caulk is not suitable for tiling or areas with direct sunlight.
    Advertisement
  3. Old caulk must be removed before you add more. Use a utility knife, razor scraper or painter’s tool to cut away existing caulk. Use quick, sharp strokes.

    Keep in mind that metal blades aren’t ideal to use around plastic fixtures. Use a tool with a plastic razor blade, which you can get at any home improvement store, to avoid damaging the plastic. [5]
    • For concrete and masonry applications, use a wire brush for removal.
    • Home improvement stores sell caulk remover products that will chemically remove old caulk. Keep in mind that these products will damage plastic surfaces.
    • For silicone caulk, you may just need to rip up enough that you can grab an end with a pair of needlenose pliers. Then, you can pull the caulk out in one long strip.
  4. Use a brush or vacuum to remove any remaining debris from the work area. Scour the surface clean with a dry, nonabrasive sponge or pad. [6] Use rubbing alcohol to remove soap scum and body oils from a bathtub or shower stall. [7] Dry the area completely before you begin caulking.
    • Both kinds of caulk need a clean surface, but if you’re using silicone, it’s imperative that you remove all debris and residue from the surface before you begin.
    • For silicone clean up, soak a rag with mineral spirits (such as turpentine) and wipe the surface down with it. Then use a damp rag to wipe the surface down again.
  5. [8] Apply strips of the tape to protect any surface area where caulk shouldn’t appear. Put them down vertically on either side of the area you plan to caulk.

    The painter’s tape acts as a guide to ensure your caulk lines are straight and uniform. The end result will look more polished and professional if you use painter's tape.
    6. Advertisement
Method 2
Method 2 of 3:

Using a Caulk Gun

PDF download Download Article
  1. Caulk guns cost between five and ten dollars at any home improvement store. Make sure you get one that is made of heavy duty metal. Solid-shaft caulk guns produce very smooth lines and generally get better results. [9] Solid-shafts are a better choice than notched-shaft caulk guns. [10]
  2. Trimming the nozzle allows the caulk to flow freely out of the tube. You can control the size of the caulk line, also called the “bead,” when you make the snip.

    The further down on the nozzle you make the cut, the wider the bead will be. For quick, basic jobs, trim the end of the nozzle straight across. [11]
    • Cut the nozzle at a 45-degree angle if you need more precision and control.
    • Check inside the nozzle for a foil seal. If it does have a foil seal, use something sharp and narrow (like a long nail) to puncture it.
  3. There will be a long, hooked rod on the end of the gun. Pull it all the way back. This will open up the gun so you can insert the caulk tube.

    Situate the tube base into the gun first. Then tilt the nozzle end of the tube into the top part of the gun. Turn the hooked rod so that the hooked part is facing up and the side with the teeth is facing down.
    • Gently squeeze the trigger to get the caulk flowing and then it’s ready to use. [12]
  4. Apply gentle and steady pressure to the trigger. Caulk will begin to flow. Pull the caulking gun along the line or area to be caulked.

    Keep squeezing the trigger gently as you go to ensure a continuous release of caulk. Move the gun at a steady speed. The caulk will form "beads" as it emerges. Try to get one continuous, even bead along each length.
    • Keep a damp rag (dipped in water or mineral spirits) handy, for fast wiping of mistakes.
    • To stop the flow of caulk, press the button under the shaft behind the needle. This will relieve tension to the gun and avoid a mess.
  5. Don't run the length of the bead any longer than around 5 feet (1.5 meters) before stopping and assessing your work for neatness. If the caulk bead already looks neat and uniform, leave it alone.

    If it needs to be smoothed out, use a caulking tool, a putty knife, your finger (dampen it first) or a damp rag to pull along the joint and press the caulk smooth. [13]
    • It is far easier to neaten caulk as you go, while it is still damp. Get to it within two to five minutes of application for best results.
    • If you don't stop frequently to neaten the caulk, the earlier portions might dry before you can neaten or mend errors. You’ll have to scrape off dried caulk if you want to neaten it.
  6. [14] The tape needs to be pulled up before the caulk dries. Lift the edge of the tape up slowly. Pull it away from you and at a 45-degree angle. [15] Do this carefully and try to avoid touching the fresh caulk.

    You can pull the tape up immediately after you create the bead if you like, but definitely get it up within a few hours. If you go any longer, the caulk could skin over.
    • Allow the caulk at least 24 hours to cure before disturbing it or getting it wet. [16]
    7. Advertisement
Method 3
Method 3 of 3:

Using Other Application Methods

PDF download Download Article
  1. A caulking gun isn’t necessary for all caulking jobs. Use 5 ounce squeeze tubes when you have a small, indoor project. [17] Remove the cap from the squeeze tube, then trim the end off the nozzle with scissors. For the most control over caulk flow, cut the nozzle at a 45-degree angle.
    • Squeeze the bottle with steady pressure so your bead will look uniform and neat.
  2. Pressurized cans are usually about 7 ounces a piece. They are ideal when you need to create a uniform bead while you’re caulking overhead, or any other time you are caulking with only one hand. [18] You should be able to obtain pressurized cans of caulk at any home improvement store.
  3. If you’ve never caulked before, it’s best to get a feel for how the caulk flows before applying it. Even if you have caulked before, it’s a good idea to get a feel for the specific caulk you’re using for this job. Practice by applying caulk on the inside corners of a cardboard box or on some other throw-away material.
    • Work on creating a steady flow and uniform bead. Try using a caulk finishing tool as you practice. These give inexperienced home handy workers a more professional result.
    • Once you’ve got the hang of it, move on to the actual caulking task.
    4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you caulk neatly?
    Kevin Turner
    Commercial Handyman
    Kevin Turner is a handyman and the owner of Red Gator Maintenance, a handyman business based in Fresno, California. Working on handyman-related projects since the age of 12, Kevin specializes in a wide variety of home improvement projects such as (but not limited to) lighting/electrical, plumbing, deck staining, drywall repairs, cabinet installation, air conditioning, trash removal, and window, roof, and appliance repairs.
    Kevin Turner
    Commercial Handyman
    Expert Answer
    It is always better to use less caulk than too much. You can always add more on a second pass. Using smaller amounts of caulk will make it easier to smooth it out. There are also caulk kits available for purchase that make smoothing out the bead easier.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
  • Question
    How do you smooth out caulk?
    Kevin Turner
    Commercial Handyman
    Kevin Turner is a handyman and the owner of Red Gator Maintenance, a handyman business based in Fresno, California. Working on handyman-related projects since the age of 12, Kevin specializes in a wide variety of home improvement projects such as (but not limited to) lighting/electrical, plumbing, deck staining, drywall repairs, cabinet installation, air conditioning, trash removal, and window, roof, and appliance repairs.
    Kevin Turner
    Commercial Handyman
    Expert Answer
    There are several ways to smooth out caulk. I would recommend using a wet finger or a damp rag or sponge.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 8
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Remove Silicone Caulk: An Expert Guide, with Tricks
      The Best Way to Remove Silicone Caulk
      How to
      Caulk the Kitchen Sink
      How to
      Puncture the Seal on Caulk
      How to
      Caulk Around a Toilet Base
      How to
      Apply Silicone Sealant
      How to
      Keep Silicone from Drying Out
      How to
      Caulk a Bathtub
      How to
      Caulk a Shower Drain
      How to
      Remove Caulking Stains from Clothes
      How to
      Remove Caulk
      How to
      Caulk Outside the House
      Advertisement

      References

      1. ↑ https://www.thisoldhouse.com/bathrooms/21015082/laying-down-a-perfect-bead
      2. ↑ https://www.thisoldhouse.com/bathrooms/21016460/how-to-caulk-a-bathtub
      3. ↑ https://www.thisoldhouse.com/bathrooms/21016460/how-to-caulk-a-bathtub
      4. ↑ https://www.thisoldhouse.com/bathrooms/21015082/laying-down-a-perfect-bead
      5. ↑ https://www.thisoldhouse.com/bathrooms/21016460/how-to-caulk-a-bathtub
      6. ↑ https://www.thisoldhouse.com/bathrooms/21016460/how-to-caulk-a-bathtub
      7. ↑ https://www.thisoldhouse.com/bathrooms/21015082/laying-down-a-perfect-bead
      8. ↑ https://www.thisoldhouse.com/bathrooms/21016460/how-to-caulk-a-bathtub
      9. ↑ https://www.thisoldhouse.com/bathrooms/21015082/laying-down-a-perfect-bead
      1. ↑ https://www.thisoldhouse.com/bathrooms/21015082/laying-down-a-perfect-bead
      2. ↑ http://www.homedepot.com/c/how_to_caulk_HT_PG_PA
      3. ↑ http://www.prettyhandygirl.com/tool-tutorial-friday-how-to-use-a-caulk-gun/
      4. ↑ Kevin Turner. Commercial Handyman. Expert Interview. 15 July 2020.
      5. ↑ https://www.thisoldhouse.com/bathrooms/21016460/how-to-caulk-a-bathtub
      6. ↑ http://www.homedepot.com/c/how_to_caulk_HT_PG_PA
      7. ↑ https://www.thisoldhouse.com/bathrooms/21016460/how-to-caulk-a-bathtub
      8. ↑ https://www.thisoldhouse.com/bathrooms/21015082/laying-down-a-perfect-bead
      9. ↑ https://www.thisoldhouse.com/bathrooms/21015082/laying-down-a-perfect-bead

      About This Article

      Article Summary X

      Before caulking, apply strips of painter’s tape vertically on both sides of the area you’re caulking to ensure that the line will be straight. Then, cut the caulk tube’s nozzle to the width of the line you’ll be caulking, and insert the tube into the caulk gun. Next, place the nozzle tip where you want to begin, and apply gentle, steady pressure to the trigger. Check the neatness of the line every 5 feet, and smooth it out with a damp rag or putty knife, if necessary. To learn more, including how to remove the painter’s tape and how long to let the caulk dry, keep reading.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 46,710 times.

      Did this article help you?

      Advertisement