How to Change a TP Link Wireless Password

PDF download Download Article
PDF download Download Article

This wikiHow teaches you how to change a TP Link router's wireless network password. Some newer routers have dual band wireless connections which provide a wireless network at 2.4GHz and 5GHz. Sometimes you can set a separate password for both networks. A 2.4GHz network has a slower internet speed, but greater range. A 5GHz network has faster internet speeds, but shorter range. The web interface for each wireless router is different, so keep in mind that the menu options may differ slightly from what is listed here.

Things You Should Know

  • You must be connected to the Internet in order to access the router's page.
  • When using a dual-band router, you can set a separate password for each network.
  • If you don't remember the admin username and password for your router, you'll need to reset it.
Method 1
Method 1 of 3:

Using a Wireless ADSL Modem

PDF download Download Article
  1. Make sure your computer is connected to the Internet and open a web browser. You'll need to be connected to the Internet in order to access the router's page.
    • If your wireless connection isn't working properly, you can connect directly to the router .
  2. This is the TP Link router's default IP address. It is also the address for the router's web interface. [1]
    • If the address above is incorrect, consult the user's manual to see what the default IP address is.
    Advertisement
  3. If you haven't changed these from the factory settings, the username and password are both admin . [2]
    • If you did change the username and/or password but no longer remember them, you'll have to reset your router before continuing. [3]
  4. It's the second tab at the top of the page.
  5. It's below the main tabs at the top of the page.
    • If you are using a dual-band router, you can click Wireless 2.4 GHz or Wireless 5 GHz to set a separate password for each network.
  6. It's below "Wireless" in the sidebar menu to the left.
  7. Use the drop-down menu next to "Authentication Type" or "Network authentication" to select "WPA-PSK/WPA2-PSK (Mixed Mode)" or "WPA2-PSK (best)", depending on which modem model you have.
    • Alternatively, you can select "WEP", but this method isn't as secure.
  8. It goes in the field next to "Pre-shared key" in the box labeled "WPA-PSK/WPA2-PSK Mixed Mode". [4]
    • If you are using WEP, enter your password next to "Key 1".
  9. It's at the bottom of the page.
  10. For Trendchip modems, Advanced Setup is the third tab at the top of the page. On Broadcom modems, Management is in the sidebar menu to the left.
  11. On Trendchip modems, SysRestart is below the main tabs at the top of the page. On Broadcom modems, Reboot is below "Management" in the sidebar menu to the left.
  12. It's in the center of the page. This reboots your modem and applies your settings.
    13. Advertisement


Method 2
Method 2 of 3:

Using a Wireless G & N Routers

PDF download Download Article
  1. You'll need to be connected to the Internet in order to access the router's page.
    • If your wireless connection isn't working properly, you can connect directly to the router.
  2. To access the router's page, you'll enter the TP Link router address in your browser's address bar.
  3. This is the TP Link router's default IP address. It is also the address for the router's web interface.
    • If the address above is incorrect, consult the user's manual to see what the default IP address is.
  4. If you haven't changed these from the factory settings, the username and password are both admin .
    • If you did change the username and/or password but no longer remember them, you'll have to reset your router before continuing. [5]
  5. It's on the left side of the page.
  6. This option is below the Wireless menu on the left side of the page. [6]
  7. It's the first checkbox after the line-break about halfway down the page. If you don't see this option, move on to the next step.
  8. Use the drop-down next to "Security type" to select "WPA-PSK/WPA2-PSK".
    • Alternatively, you can select "WEP" in the Security Type drop-down menu, but this method is not as secure.
  9. This goes into the password field labeled "PSK Password." [7]
    • If you are using WEP, enter your password next to "Key 1"
  10. This button is at the bottom of the page.
  11. This will save your new password, though you'll need to reboot your router for the changes to take place.
  12. It's at the bottom of the column of options that is on the left side of the page.
  13. You'll find this near the bottom of the System Tools menu.
  14. This will reboot your router. When it comes back online, your password will be in effect.
    • You will need to reconnect each of your previously connected devices to the router with the new password.
    15. Advertisement
Method 3
Method 3 of 3:

Using a Wireless AC Router

PDF download Download Article
  1. You'll need to be connected to the Internet in order to access the router's page.
    • If your wireless connection isn't working properly, you can connect directly to the router.
  2. To access the router's page, you'll enter the TP Link router address in your browser's address bar.
  3. This is the TP Link router's default IP address. It is also the address for the router's web interface.
    • If the address above is incorrect, consult the user's manual to see what the default IP address is.
  4. If you haven't changed these from the factory settings, the username and password are both admin .
    • If you did change the username and/or password but no longer remember them, you'll have to reset your router before continuing. [8]
  5. It's the center tab at the top of the page.
  6. It's in the sidebar menu to the left. This displays the Wireless settings. [9]
    • If you are using a dual band router, you can click Wireless 2.4 GHz or Wireless 5 GHz to set a separate password for each network.
  7. Enter this in the field next to "Wireless Network Name (SSID). This is the name that will be displayed when wireless devices search for your wireless network .
  8. This goes in the field next to "Password". [10]
  9. It's the green button at the bottom of the page.
    10. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I get the IP address if it is not written on my router?
    Community Answer
    Go to the search bar, select "run" and type in "cmd" and once the command box opens type "ipconfig/all."
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 10 Helpful 22
  • Question
    Can I disable a TP LINK 2 login password completely?
    Community Answer
    Yes, you can.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 13 Helpful 27
  • Question
    How do I change my router password?
    Community Answer
    You have to log into your router via your computer: the IP address is typically 192.168.0.1, but it may be different for other routers. Once you have logged in, go to your router settings. If you don't know the password for your router, the default is Admin or Administrator.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 15 Helpful 45
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Avoid resetting your router unless you absolutely have to. If you do have to reset your router, create a new username and password immediately.
        Thanks
        Helpful 2 Not Helpful 5
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      You Might Also Like

      How to
      See Who Is Connected to Your Wireless Network
      How to
      Use SSH
      Simple Ways to Find a Network Security Key
      How to
      Change a PLDT WiFi Password
      4 Simple Methods to Kick People off of Your Wi-Fi
      How to
      Change a Router Password
      How to
      Route All Network Traffic Through the Tor Network
      How to
      Change Your Globe At Home WiFi Password
      How to
      SSH Into an iPhone: Complete Tutorial
      How to
      Set Up and Use Tor: Windows, Mac, & Linux
      How to
      Disable SSH Server in Windows 10
      Easy Ways to Reset a Linksys Router Password
      How to
      Change a Huawei WiFi Password
      How to
      Block VNC
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about routers, check out our in-depth interview with Tyrone Showers .

      References

      1. ↑ https://www.tp-link.com/us/support/faq/87/
      2. ↑ https://www.tp-link.com/us/support/faq/87/
      3. ↑ https://www.tp-link.com/us/support/faq/426/
      4. ↑ https://www.tp-link.com/us/support/faq/399/
      5. ↑ https://www.tp-link.com/us/support/faq/426/
      6. ↑ https://www.tp-link.com/us/support/faq/399/
      7. ↑ https://www.tp-link.com/us/support/faq/399/
      8. ↑ https://www.tp-link.com/us/support/faq/426/
      9. ↑ https://www.tp-link.com/us/support/faq/399/
      1. ↑ https://www.tp-link.com/us/support/faq/399/

      About This Article

      Article Summary X

      1. Connect your router to the internet.
      2. Open a web browser and enter "192.168.1.1" in the address bar.
      3. Enter "admin" as the router's username and password.
      4. Click Wireless in the sidebar menu to the left.
      5. Click Wireless Settings/Security below "Wireless".
       6. Select or click "WPA-PSK/WPA2-PSK" as the Security Type.
      7. Enter your password next to "Password" or "PSK Passphrase".
      8. Click Save .
      9. Click System Tools .
      10. Click Reboot .
      11. Click Ok and reboot your modem.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 1,015,133 times.

      Reader Success Stories

      • Subramani S.

        Aug 15, 2018

        "I wanted to change WiFi password but had so many doubts how to go about it. As usual, I Googled and found ..." more
      More reader stories Hide reader stories
      Share your story

      Is this article up to date?

      Advertisement