If you have a fireplace, you know how great it is to be able to light a fire in your home on a cold night. However, you also know how dirty the bricks in your fireplace get from all the smoke and soot. Because they get so dirty, fireplace bricks should be cleaned at least once a year. Luckily, the process of cleaning these bricks is relatively easy, whether you’re using traditional cleaning products or ordinary household items!

Method 1
Method 1 of 2:

Using Cleaning Products

PDF download Download Article
  1. Use the brush attachment on your vacuum and go over all of your bricks. Vacuum as much loose dust, debris, and soot as you can so the bricks are easier to clean later.
  2. Combine 1 2 cup (120 mL) of dish detergent with 4 cups (950 mL) of water in a spray bottle and shake. Then, spray this solution onto your bricks and scrub them with your differently-sized scrub brushes. Rinse the bricks with warm water after they’re clean and dry them with a clean, dry cloth. [1]
    • Dish detergent is the easiest and quickest cleaning method for fireplace bricks, so it should be the first method you should try if the bricks don’t look too bad.
    • Dishwashing detergent is relatively harmless, so this is also the best method to use on older bricks.
    Advertisement
  3. Mix 2 tablespoons (34 grams) of borax with 4 cups (950 mL) of hot water and 1 tablespoon (15 mL) of dish soap in a spray bottle. Shake the mixture together, then spray it onto the bricks. Scrub the sprayed bricks with your brush in a circular motion, then use a clean, damp cloth to wipe away the grime after they’re clean. [2]
    • You can also make this cleaning solution in a bucket and apply it to the bricks with a paintbrush or sponge if you don’t have a spray bottle.
  4. Combine 1 2 cup (120 mL) of ammonia, 1 4 cup (59 mL) of dishwashing detergent, and 4 cups (950 mL) of hot water in a spray bottle, swirling the bottle to mix the ingredients together. Spray this solution onto your bricks and scrub them with your scrub brush to clean them. Once they’re clean, wipe them off with a damp cloth to remove the cleaning solution. [3]
    • Ammonia can be harmful on brickwork, so don’t use this method on especially old or fragile bricks.
    • Be sure to wear rubber gloves and safety goggles when working with ammonia.
  5. Swirl together 1 8 cup (30 mL) of TSP with 1 gallon (3.8 L) of hot water in a tall bucket. Then, dip your brush into the cleaning solution and use it to scrub your bricks clean. Finally, rinse off the bricks with warm water. [4]
    • Only try using TSP if dish soap and water doesn’t work.
    • TSP is a very strong cleaning solution, so make sure you don’t handle it without wearing rubber gloves and safety goggles. Avoid getting the solution on your skin, your clothes, or the carpet.
    • TSP can be purchased at most home improvement stores and some grocery stores.
  6. Advertisement
Method 2
Method 2 of 2:

Cleaning Your Fireplace with Ordinary Household Items

PDF download Download Article
  1. Combine about 2 to 3 tablespoons (30 to 44 mL) of dish soap with ½ cup (5 ounces) of baking soda to make a cleaning paste. Then, dip your scrub brush into the paste and use it to scrub the bricks using small, circular motions. Let the paste sit on the bricks for about 5 minutes, then rinse it off with warm water. [5]
    • Work from the bottom up when scrubbing the bricks, to avoid leaving streaks.
  2. Mix equal parts of vinegar and warm water in a spray bottle and spray the bricks with this solution. Spray the bricks again after a few minutes, then scrub them in a circular motion with a scrub brush. Rinse the bricks with warm water once you’re done. [6]
    • Because the acidity of vinegar makes it a tad abrasive, you may not want to use this method on bricks that are more than 20 years old.
    • To avoid streaking, work from the bottom of the fireplace up when scrubbing the bricks.
    • You may want to apply a mixture of baking soda and water to the bricks after you’re done, to cancel out the acidity of the vinegar you just sprayed on them. However, this isn’t strictly necessary.
  3. To make your paste, combine 2 tablespoons (20 grams) of cream of tartar with a small amount of water. Then, use an old toothbrush to apply a layer of the thin paste to a sooty area of brick and let it sit for 5-10 minutes. Finally, rinse the paste off with warm water. [7]
    • Unless you have a lot of cream of tartar on hand, this method is best used for spot cleaning relatively small areas of soot.
  4. People have sometimes had success cleaning fireplace bricks with bathroom cleaning spray or oven cleaner. Spray the cleaner onto your bricks and let it sit for 20-30 minutes. Then, scrub the bricks with your brush and use a sponge dipped in water to wipe off any residue left over. [8]
    • Using bathroom cleaner or oven cleaner isn’t an effective method for cleaning bricks 100% of the time, so you should only consider using them if you have no other way to clean your fireplace bricks.
    • You can acquire bathroom cleaning spray and oven cleaner at any grocery store that sells home cleaning supplies.
  5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I clean the brick on a fireplace that runs to the ceiling?
    Michelle Driscoll, MPH
    Founder, Mulberry Maids
    Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.
    Founder, Mulberry Maids
    Expert Answer
    You will need to scrub the brick with a scrub brush and a dish soap solution. To reach the high ceiling, you will most likely need to use a high ladder. Start cleaning higher up on the brick wall as possible and work your way down. Use cautionary measure while working on the ladder. If you do not feel safe cleaning on the ladder, you may want to call a professional.
  • Question
    How do I remove paint and plaster stains from the fireplace brick?
    Michelle Driscoll, MPH
    Founder, Mulberry Maids
    Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.
    Founder, Mulberry Maids
    Expert Answer
    Apply paint stripper using a trowel to the paint stains and leave it for several hours and scrape away as much as possible. You may also want to scrub the bricks with plain water to remove any remaining paint and to remove the chemicals from the brick. For the plaster stains, you can first scrape away as much of the plaster as possible. For any leftover residue, you can apply a hydrochloric acid solution with a wire brush to clean the brick.
  • Question
    Can the bricks on the inside of the chimney be painted?
    Community Answer
    Yes, bricks can be painted, even ones around and inside the chimney. Just make sure the bricks are clean before applying the first base coat.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      • Be sure to wear rubber gloves and safety goggles when using cleaning chemicals to clean your fireplace.
      • Before using any chemical solutions to clean all of your fireplace bricks, try them out first on a small spot in your fireplace that isn’t well visible. Some chemicals may bleach or stain and it’s best to know which ones will affect your fireplace before using them.
      • Diluted muriatic acid is sometimes suggested as a good way to clean fireplace bricks without having to scrub them. However, there are a lot of safety precautions you have to take when using the acid, so it’s better to leave this cleaning method to the professionals.
      Advertisement

      Things You'll Need

      • Dishwashing detergent
      • Salt
      • Bucket
      • Stiff Bristled Brush
      • Warm Water
      • Borax
      • Ammonia
      • Trisodium Phosphate
      • Rubber Gloves
      • Vinegar
      • Cream of tartar
      • Baking soda
      • Bathroom cleaner or oven cleaner

      About This Article

      Article Summary X

      To clean fireplace bricks, start by mixing baking soda and dish soap and rubbing the paste into the bricks with a scrub brush. Then, let the paste sit for 5 minutes before rinsing it off with warm water. You can also clean fireplace bricks by spraying them with equal parts water and white vinegar. After you spray the bricks, scrub them with a scrub brush and rinse them off with warm water. To learn how to use commercial cleaning products to clean fireplace bricks, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 199,272 times.

      Did this article help you?

      Advertisement