How to Clean a Dishwasher Drain

Co-authored by Chris Willatt

Last Updated: May 11, 2024 Approved

Dishwasher drains can become clogged as a result of food debris, or built-up grease and grime. If your dishwasher stops draining completely after it has been used, this likely means that the drain or drain filter is clogged. In order to clean your dishwasher drain, you should remove any clogs from the drain hose, unclog the drain, and clean the filter. You can also prevent clogs by following proper care instructions.

Get Product Support Solve Any Problem

Hi there! Do you have a question about how to use or repair your home appliance? I’ve read the manuals so you don’t have to. Select your product, brand, and model, then ask away!

*

Method 1

Method 1 of 4:

Cleaning the Drain Filter

Download Article

1
Use a damp cloth to clean around the filter and remove debris. Remove any food waste or debris that may be located at the bottom of your dishwasher. Use a damp cloth to wipe around the filter and catch basin. ^{[1]
X
Research source}
- For example, you may find small particles, such as bones, noodles, seafood shells, or even glass shards.
You can consult your owner’s manual for specific instructions regarding how to remove the filter on your dishwasher. Typically, four screws hold the filter in place. The bottom rack of the dishwasher needs to be removed in order to access the filter.

Advertisement
3
Wash the filter. Rinse the filter with water in your sink and remove any grease or debris that is attached to the filter. If the filter is clogged your dishwasher will not be able to drain properly and your dishes will not get clean. ^{[2]
X
Research source}
- Alternatively, you could use a wet vac to clean off any debris from the filter. ^{[3]
  X
  Research source}
Once you have fully cleaned the filter you can reconnect it to the dishwasher, using a screwdriver. Put all of the screws in place before tightening them. This way if you drop a screw into the bottom of the dishwasher you won’t have to unscrew all the screws to fish it out. ^{[4]
X
Research source}

Method 2

Method 2 of 4:

Unclogging the Drain

Download Article

In order to unclog the drain from inside the dishwasher, you need to remove the bottom rack. This way you will be able to access the drain, catch basin, and filter. Always make sure the power is fully disconnected before you begin working on the dishwasher.
Using a screwdriver, remove the drain catch and filter that is typically located in the center of the bottom of the dishwasher. You can consult your owner’s manual in order to locate and remove the filter. ^{[5]
X
Research source}
Once the filter and drain catch have been removed, you should be able to see down the drain. Remove any clogs from the drain using a straightened wire hanger or auger. ^{[6]
X
Research source}
4
Pour a baking soda and vinegar mixture down the drain. In order to remove any additional debris, grease, or scum from the drain, you can use a baking soda and vinegar mixture to flush out the drain. Pour 1 tablespoon of baking soda and 2 tablespoons of vinegar down the drain. ^{[7]
X
Research source}
- Alternatively, you could use a commercial drain cleaner, but these can contain harsh chemicals that may remain in your dishwasher for some time.
The baking soda and vinegar will help to break up any clogs that may remain in the drain. After 10-15 minutes, pour hot water down the drain to help remove the mixture along with any remaining debris. ^{[8]
X
Research source}
Once you have unclogged the drain, reconnect the dishwasher and run it on a normal cycle. The dishwasher should now drain properly and water should no longer pool at the bottom of the machine.

Method 3

Method 3 of 4:

Removing a Clog from the Drain Hose

Download Article

Before you begin troubleshooting a clogged drain in your dishwasher, you should always disconnect the power to the machine. This can be done by removing the plug from the outlet. You could also remove the fuse from the fuse box or turn the appropriate breaker off to ensure that the power is completely disconnected. ^{[9]
X
Research source}
Your dishwasher owner’s manual will likely come with instructions that will tell you how to locate and disconnect the hose from the dishwasher. ^{[10]
X
Research source}
Once you have located the hose, use pliers to pinch the wire clamp and slide it up the hose. You should also place a catch basin under the hose, to collect any spills that may come out of the hose. ^{[11]
X
Research source}
4
Use a wire hanger or auger to unclog the hose. Once the hose has been disconnected, try wiggling the hose to loosen any debris that may be trapped. Then, insert a straightened wire coat hanger or auger into the hose and remove any clogs that may exist. ^{[12]
X
Research source}
- Alternatively, you can try running high-pressure water through the hose to remove any clogs. Use a garden hose to blast out debris that may be trapped.
Once the clog has been removed from the hose, reattach the hose to the dishwasher. Plug in the dishwasher and run the machine on a normal cycle with no dishes. The dishwasher should now drain properly and water should no longer pool in the bottom of the machine. ^{[13]
X
Research source}

Method 4

Method 4 of 4:

Keeping a Clean Dishwasher

Download Article

You can also take precautionary steps to help ensure that your dishwasher drain does not become clogged. The dishwasher shares a drain with the kitchen sink. If your kitchen sink is clogged this can also backup your dishwasher. As a result, run your garbage disposal immediately before using your dishwasher. This will help to clear the drain and make your dishwasher more efficient. ^{[14]
X
Research source}
Often your dishwasher drain will get clogged by large food particles that get trapped in the filter or drain. You can prevent this by scraping off your dishes prior to loading them into the dishwasher. For example, remove any food scraps that may be stuck to your dishes. This can help keep your dishwasher clean and clog-free. ^{[15]
X
Research source}
Although it is a good idea to remove large food items from your dishes before loading the dishwasher, you should not soak or completely pre-wash your dishes. The dishwasher actually needs a bit of grease. Without any grease or grime the soap will foam during the washing cycle, and this can be harmful to the machine. ^{[16]
X
Research source}
Dishwashers can also get clogged from overuse. You can save money and preserve the lifespan of your dishwasher by only running it when it is full. Avoid running the dishwasher for partial loads. ^{[17]
X
Research source}

Expert Q&A

Search

Add New Question

Question

How do you unblock a dishwasher drain pipe?

Chris Willatt
House Cleaning Professional
Chris Willatt is a House Cleaning Professional based in Denver, Colorado. Chris is the owner of Alpine Maids, a cleaning agency that he founded in 2015. Chris is on a mission to elevate what it means to be a cleaning professional and has built up Alpine Maids with that goal in mind. Chris has been featured in USA Today, Forbes, and Readers Digest. Alpine Maids received Angie's List Super Service Award for three years in a row from 2016-2018. They were also awarded Colorado's "Top Rated Local House Cleaning" Award in 2018 and were featured on the Inc. 5000 Company List.

Chris Willatt

House Cleaning Professional

Expert Answer

You can put a couple of cups of vinegar into your empty dishwasher and just run the cycle like normal. This will get rid of calcium deposits left by hard water and break down blockages that may be forming eventually. There is also the filter you need to wash out every three months.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 4

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Things You'll Need

Screwdriver
Wire coat hanger or auger
Baking Soda
Vinegar
Cloth

Tips

If you are unable to unclog your dishwasher drain, contact a licensed plumber. They will be able to fix any clogs and get your dishwasher running properly again.

Thanks
Helpful 2 Not Helpful 0
Always unplug your dishwasher before cleaning the drain.

Thanks
Helpful 1 Not Helpful 2

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

Log in

How to Clean a Dishwasher Drain

Steps

Get Product Support Solve Any Problem

Cleaning the Drain Filter

Unclogging the Drain

Removing a Clog from the Drain Hose

Keeping a Clean Dishwasher

Expert Q&A

Video

Things You'll Need

Tips

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories