Download Article
Download Article
Many people don’t realize that dryer vents need to be cleaned, but clogs of lint could compromise the efficiency of your dryer or even start a fire. You should clean the dryer vent about once a year. If you find that your dryer is no longer drying your clothes properly or that it is getting extremely warm, it is probably time to clean your vent.
Steps
Get Product Support Solve Any Problem
Try Asking:
We’re sorry we don’t have the product, brand, or model you are looking for. Please enter its name below so that we can add support for it.
Thank you! We’ll review your request and add support for this product as soon as possible. In the meantime, you can ask more questions about the products we currently support.
-
Vacuum on the ground floor. You will need to use a vacuum to clean out the length of the vent and, unless you have access to an industrial vacuum, it is unlikely that you’ll be able to do this from the roof. Before climbing up to the roof, get behind the dryer to vacuum out the vent. [1] X Research source- There should be clamps that connect the exhaust pipe of the dryer to the vent. Use a screwdriver to release these so that you can vacuum.
- You can put the tube of the vacuum directly up the vent. However, there are special attachments that can be clamped onto the end of the tube that are designed to pick up lint from a vent. These can help vacuum the vent. [2] X Trustworthy Source Consumer Reports Nonprofit organization dedicated to consumer advocacy and product testing Go to source
-
Peel back shingles that obstruct the vent on the roof. Once you have safely ascended onto the roof, examine the area around the vent guard. If any shingles are covering the vent, or the screws that attach to the guard, peel back the shingles. If they are held in place with tar, use a utility knife to cut around the shingles and secure access to the vent. [3] X Research sourceAdvertisement -
Remove the guard to the dryer vent on the roof. When you get on the roof, you should find that the vent is covered by a guard. If you can, remove it. You might find that there are gobs of lint stuck on in. You can remove some of this with your hands. [4] X Research source- If the guard is secured in place by nails, place a cat’s paw pry bar under the head of the nail and hit the pry bar with a hammer to release the nails. After you have removed the nails, hold on to them so that you can reinstall them later. [5] X Research source
- After the nails have been removed, pull up on the guard to remove it. You might need to twist it as you pull to dislodge it.
-
Use a vent brush to clean the surface. You can purchase a vent trap cleaner separately or a kit with attachments to your vacuum. Use it to gently remove lint from the guard and other exterior surfaces. [6] X Research source -
Put the vent brush inside the vent. Push the brush inside the vent and then twist it. This will get lint trapped in the brush. Then pull the brush out to remove the lint. Repeat until you are no longer picking up lint. [7] X Research source- Because much of the lint concentrates near the ends of the vent tube, this basic cleaning and the vacuuming on the ground floor should remove most of the lint. If you can see significant amounts of lint that remain beyond your reach, call a professional.
-
Reinstall the guard. If you removed the guard, put it back into place. Be sure that it is intact so that no animals or debris can enter the vent.- If you find that the guard is not intact, call a professional to have it replaced. Debris falling into the vent could seriously compromise your dryer. [8] X Research source
- Installing a guard would also help prevent birds and mice from entering the vent.
Advertisement
-
Call an expert for slate and tile roofs. Slate and tile can easily slip. This can damage the roof or even cause you to fall. Only experts should climb on top of slate or tile roofs. [9] X Research source -
Do roof work on a clear day. Rain will significantly increase the likelihood of you slipping and hurting yourself. Even a strong wind can destabilize you or the ladder when you least want it to. [10] X Research source -
Place ladder on a solid, level surface. If the ground is soft or slanted the ladder could slip out from underneath you. Do not place the ladder on a slanted driveway. -
Wear safety equipment. You should wear a helmet in case you fall. Wear shoes, like soft-soled boots, that will have good traction on the roof. You can also consider investing in a safety harness that will catch you if you fall.- Safety harnesses can cost about $300, which is more than the cost of having a professional clean your vent, which is about $120. However, if you do a lot of work around the house, a safety harness could be a good long-term investment. [11] X Research source
-
Extend the ladder three feet past the roof. This will give you space to safely transfer from the ladder to the roof. If the ladder is not tall enough or requires an extremely steep angle to reach this height, buy a taller ladder. [12] X Research source -
Keep the ladder at a 4:1 angle. This means that your ladder should extend one foot out from the house for every four feet that it extends up. This ensures that the angle is gentle enough that you will be able to climb safely.- For example, if you know your roof is 21 feet tall and that you want the ladder to extend 3 feet past the roof, then the bottom the ladder should be planted 6 feet from the roof. [13] X Research source
-
Recruit an assistant to watch the ladder. You should have someone to hold the ladder secure as you climb up. They should also watch for anything that might disturb the ladder. Keep pets and children away from the ladder. -
Keep two hands on the top rung of the ladder when you step onto the roof. To stay secure during the transition, keep both hands on the ladder when you initially step onto the roof. This technique requires that the ladder is positioned so as to extend well past the roof. [14] X Research source
Advertisement
Expert Q&A
Search
-
QuestionWhen should I replace my dryer vent?Egor Shevtsov is a Home Improvement Specialist and Managing Partner at Appliance Techie in Orange County, California. With over seven years of experience, he specializes in maintaining and repairing appliances. He earned a Bachelor of Arts in Business Administration and Management from the International American University and a Master of Business Administration from the Russian University of Cooperation, former Moscow University of Consumer Cooperation.You'll need to replace the vent hose if it gets damaged, jammed or dented, since these problems will prevent the proper airflow. If it wasn't cleaned in a couple of years, it's possible that the dirt buildup will prove too challenging and, in some cases, a replacement is a better option.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://www.prettyhandygirl.com/time-to-clean-your-dryer-ducts-prevent-fires/
- ↑ https://www.consumerreports.org/appliances/clothes-dryers/how-to-clean-your-dryer-vent-a5519869329/
- ↑ https://www.weekand.com/home-garden/article/remove-roof-dryer-vent-cap-18008886.php
- ↑ https://www.prettyhandygirl.com/time-to-clean-your-dryer-ducts-prevent-fires/
- ↑ https://www.weekand.com/home-garden/article/remove-roof-dryer-vent-cap-18008886.php
- ↑ https://www.prettyhandygirl.com/time-to-clean-your-dryer-ducts-prevent-fires/
- ↑ https://www.frugallyblonde.com/2016/04/how-to-clean-your-dryer-vent/
- ↑ https://www.prettyhandygirl.com/time-to-clean-your-dryer-ducts-prevent-fires/
- ↑ https://www.familyhandyman.com/tools/how-to-properly-use-a-roof-safety-harness/view-all
- ↑ https://www.familyhandyman.com/tools/how-to-properly-use-a-roof-safety-harness/view-all
- ↑ https://www.familyhandyman.com/tools/how-to-properly-use-a-roof-safety-harness/view-all
- ↑ https://www.familyhandyman.com/tools/how-to-properly-use-a-roof-safety-harness/view-all
- ↑ https://simplifiedsafety.com/blog/top-10-rooftop-safety-hazards/
- ↑ https://www.familyhandyman.com/tools/how-to-properly-use-a-roof-safety-harness/view-all
About This Article
Article Summary
X
Before you clean a dryer vent on the roof, vacuum out the vent behind the dryer since it's easier to clean out the length of the vent from the ground floor. Then, get on the roof, and peel back any shingles that may be covering the vent as well as the guard. Once the vent is exposed, use a vent brush first clean the exterior surfaces. Next, push the brush inside the vent, twist it to trap the lint in the brush, and remove the brush to clean the lint off. Repeat this process until no more lint comes out. To learn how to get on the roof safely, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 85,368 times.
Reader Success Stories
- "I'm so glad they included steps for how to climb the roof. I'm so scared to do it, but now I feel like I could. Thanks!" ..." more
Advertisement
85%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I'm so glad they included steps for how to climb the roof. I'm so scared to do it, but now I feel like I could. Thanks!"
..."
more
"Very informative and helpful."
