How to Clean a Horse Shoe

PDF download Download Article
PDF download Download Article

If you come across an old horseshoe at an antique store or in a field somewhere, chances are it’s going to look a little rusty and worn. Thankfully, a coat of rust doesn’t mean that the horseshoe has reached the end of its life. With some time and elbow grease, you can revive it and get it gleaming so you can display it as a decoration or even use it to play horseshoes. If you’re working with horse shoe that is on a horse, check out this article on how to clean a horse’s hoof .

Method 1
Method 1 of 3:

Removing Surface Dirt

PDF download Download Article
  1. Make sure to get into all the cracks and crevices! You may even want to use a small pick to dislodge dirt from the grooves of the horseshoe if it’s caked in. [1]
    • If you don’t have a toothbrush, use a scrub brush.
    • You may want to wear gloves during this process. Depending on where you found the horseshoe or what condition it’s in, there might be some poop or other things you don’t want to get on your hands.
  2. Watermark wikiHow to Clean a Horse Shoe
    Small flakes of rust will come away with just a little bit of elbow grease, which will make the rest of the cleaning process a bit easier. Just grab the steel wool and scrub the entire horseshoe with it until there’s no more rust coming away. [2]
    • If you don’t have steel wool, you could also use sandpaper or a wire brush.
    • This process also helps remove more dirt if any is left on the horseshoe.
    Advertisement
  3. Watermark wikiHow to Clean a Horse Shoe
    Sometimes you might find a horseshoe that still has nails or bits of metal coming out of it. If you want to use the horseshoe for games or decoration, you’ll need to remove these. You should be able to grasp the end of the nail with a pair of pliers and wiggle it loose. [3]
    • Make sure to discard of the nails! You don’t want to drop one and accidentally step on it later.
    • If the nails are too hard to remove, wait until after you’ve treated the horseshoe for rust and then try again. They should be looser at that stage.
    4. Advertisement
Method 2
Method 2 of 3:

Getting Rid of Rust

PDF download Download Article
  1. Watermark wikiHow to Clean a Horse Shoe
    Place the horseshoe in a plastic container. Add enough white vinegar so that the horseshoe is completely covered. Let it sit for 24 hours, then take it out and scrub it down with a steel wool pad or scrub brush. [4]
    • If the rust is particularly bad, you may need to soak the horseshoe in white vinegar a second time.
  2. Watermark wikiHow to Clean a Horse Shoe
    Place the horseshoe in a clean plastic container and sprinkle it with about 1/2 cup (150 grams) of white table salt. Pour lemon juice (fresh or bottled) over the horseshoe so that it’s completely saturated. Let it sit for 2-3 hours, then scrub the horseshoe with a steel wool pad. Repeat the salt-and-lemon process on the other side of the horseshoe. [5]
    • You could also try scrubbing the horseshoe with the lemon rind.
    • This process should take about 3 hours in all, but you can repeat it 2 or 3 times if needed.
  3. Watermark wikiHow to Clean a Horse Shoe
    In a plastic container, mix 2 cups (470 mL) of hot water and 6 tablespoons (120 grams) of citric acid. Submerge the horseshoe and let the citric acid do its work over the next 12 hours or so. In the morning, rinse and scrub the horseshoe to remove the rest of the rust. [6]
    • You can buy citric acid online or from a health food store. Some grocery stores carry it now, too.
    • Citric acid comes from citrus fruits. It’s naturally abrasive and is a chemical-free compound that is safe to clean with.
  4. This is also an option if you tried another method but couldn’t get all the rust off. Depending on what brand and type of rust remover you purchase, it may take anywhere from 30 minutes to 24 hours for the chemicals to work. Look for a bottled product that you can pour into a container so the horseshoe can soak in it, rather than a product in a spray bottle. [7]
    • When working with chemical products, remember to wear protective gear. Gloves, protective eyewear, and even a face mask can help keep you safe. If possible, work in a well-ventilated area so you aren’t breathing in dangerous fumes.
    • Always read the directions and follow them carefully.
    5. Advertisement
Method 3
Method 3 of 3:

Shining the Horseshoe

PDF download Download Article
  1. Watermark wikiHow to Clean a Horse Shoe
    Smooth and shine the horseshoe with an angle grinder . An angle grinder is a type of power tool that you can use to grind away rough surfaces to reveal smooth metal underneath. You’ll need either a brush or sandpaper attachment. After turning it on, move the angle grinder back and forth over the surface of the horseshoe until the metal beneath is revealed. [8]
    • Wear safety goggles and thick gloves to protect your eyes and hands while you work.
    • If loud noises bother you, you may also want to wear earplugs.
    • It may help to hold the horseshoe in a clamp so that you can use both hands on the grinder without worrying about the horseshoe slipping around.
  2. Watermark wikiHow to Clean a Horse Shoe
    Use elbow grease and a piece of sandpaper if you don’t have an angle grinder. Coarse sandpaper, or 40-80 grit sandpaper, should work well for this type of project. To make things easier on your hand, invest in a manual hand sander. You may also want to use a sanding sponge to help you get around the curves of the horseshoe more easily. [9]
    • Rub the sandpaper back and forth over the horseshoe until you see the metal underneath peeking through.
    • You can buy hand sanders, sanding sponges, and sandpaper at your local hardware store.
  3. This may be particularly helpful if you’re planning to use the horseshoe as a decorative accent. Each product is a little different, but generally, you’ll apply a little bit of polish to a clean rag and rub or massage it into the metal until it gleams.
    • To get into all the cracks and crevices, you could use a cotton swab dipped in polish.
    • Wear gloves and clothes you don’t mind getting dirty while you’re doing this. If you get the polish on your outfit, it can be really hard to wash out.
  4. Look for a clear spray-on varnish or lacquer at your local hardware or art supplies store. Spray one side of the horseshoe, let it dry, and then spray the other side. Don’t forget to get the sides of the horseshoe, too.
    • If you prefer, you could even spray paint the horseshoe a different color. This could be cool if you’re using the horseshoe to decorate.
    5. Advertisement


Community Q&A

Search
Add New Question
  • Question
    Can you do it with a draft horse's horseshoe too?
    NowUknow
    Community Answer
    Yes, you can do this with any horseshoe. Just don't reuse them or put them back on a horse.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 5
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Store or display the horseshoe in a dry location to keep it from rusting. [10]
        Thanks
        Helpful 0 Not Helpful 0
      • If the horseshoe is very rusty and dirty, you may have to treat it several times before it looks clean. Don’t give up! Unless the horseshoe is completely corroded through, it should be salvageable.
        Thanks
        Helpful 1 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Wear protective gear when working with chemicals or while sanding down the horseshoe. [11]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You’ll Need

      Removing Surface Dirt

      • Old toothbrush
      • Gloves
      • Steel wool pad
      • Pliers

      Getting Rid of Rust

      • Plastic container
      • Steel wool pad
      • Scrub brush

      Shining the Horseshoe

      • Angle grinder
      • Sandpaper
      • Metal polish
      • Spray varnish or lacquer

      You Might Also Like

      How to
      Make a Horse Blanket
      How to
      Breed a Horse
      Why Do Horses Sleep Standing Up? All Your Questions Answered
      How to
      Tell the Age of a Horse
      How to
      Approach Your Horse
      How to
      Start a Horse Breeding Farm
      How to
      Check a Mare for Pregnancy
      How to
      Join Up With a Horse
      How to
      Care for a Miniature Horse
      How to
      Catch a Wild Horse
      Advertisement

      References

      1. ↑ https://animals.mom.me/how-to-clean-used-horseshoes-3894686.html
      2. ↑ https://animals.mom.me/how-to-remove-rust-from-horseshoes-4315627.html
      3. ↑ https://youtu.be/GUPTrH9ulAY?t=116
      4. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/how-to-get-rust-off-metal.html
      5. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/how-to-get-rust-off-metal.html
      6. ↑ https://www.architecturaldigest.com/story/how-to-remove-rust-from-metal-knives-tools-and-objects
      7. ↑ https://www.bobvila.com/articles/best-rust-remover/
      8. ↑ https://www.bobvila.com/articles/how-to-remove-rust/
      9. ↑ https://www.bobvila.com/articles/2145-quick-tip-choosing-sandpaper/
      1. ↑ https://www.thisoldhouse.com/tools/21166221/how-to-remove-rust-from-tools
      2. ↑ https://www.bobvila.com/articles/how-to-remove-rust/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 71,544 times.

      Did this article help you?

      Advertisement