How to Clean a Hydro Flask

PDF download Download Article
PDF download Download Article

Cleaning your Hydro Flask is super fast and easy. The main thing you will want to invest in is a bottle brush. You can use a brush specifically made for the Hydro Flask, or a standard baby bottle brush will do the trick. Daily cleanings with soap and hot water are recommended to maintain your Hydro Flask, but occasionally you will need to do a deeper cleaning to get rid of bacteria and stubborn stains.

Method 1
Method 1 of 3:

Washing with Dish Soap

PDF download Download Article
  1. Unscrew the lid and remove it from the bottle. If your Hydro Flask has a straw, separate the straw from the lid.
    • It's important that you take your Hydro Flask apart before cleaning it. In order to get a good cleaning, you'll need to wash all of the components, not just the outside of the bottle and the spout.
    EXPERT TIP

    Marcus Shields

    House Cleaning Professional
    Marcus is the owner of Maid Easy, a local residential cleaning company in Phoenix, Arizona. His cleaning roots date back to his grandmother who cleaned homes for valley residents in the 60’s through the 70’s. After working in tech for over a decade, he came back to the cleaning industry and opened Maid Easy to pass his family’s tried and true methods to home dwellers across the Phoenix Metro Area.
    Marcus Shields
    House Cleaning Professional

    Clean your Hydro Flask about once a month. Marcus Shields of Maideasy says: "To be safe, deep clean your Hydro Flask at least once a month. If you don't clean it often enough, mold will grow under that rubber seal, and it will disgust you when you pull it off. "

  2. Use a clean dishcloth or sponge to wash the outside of your bottle, all models of Hydro Flask lids, and the outside of the straws. Clean the inside of your bottle with a bottle brush.
    • A sponge or rag won't be able to reach the bottom of your bottle, so you'll definitely want to use some type of long brush. A bottle brush from the baby section of your local department store works perfectly.
    • Do not soak your lid. Submerging the lid for an extended period of time can trap water inside of it.
    • Pay special attention to the drinking spouts since this is where bacteria likes to collect. If you have one, use a small bottle brush or nipple brush to help clean these small spaces. [1]
    • If you have pipe cleaners, use one to clean the inside of the straw. Simply insert the pipe cleaner into one end of the straw, and firmly move it up and down along the insides to remove any buildup. [2]
    Advertisement
  3. It's important to remove all traces of the soap. Leaving soap in any of the pieces of your Hydro Flask can lead to a build up of residue. This typically won't hurt you, but it can affect the taste of your water.
    • Run tap water over the top of the lid, then flip the lid over to allow the water to run through the underneath side as well. Slowly rotate the lid under the water to make sure it is completely rinsed off.
    • Hold one opening end of the straw under the running tap water to rinse it out. Allow the water to flow through the straw for about 10 seconds, or until the water runs clear.
  4. The Hydro Flip and Wide Straw models are the only 2 lids that can be washed in the dishwasher. Lids to all other Hydro Flask models should be washed by hand.
    • Note that frequent washing in the dishwasher can decrease the useful life of these lids. If it's possible, wash these lids by hand during regular cleanings and save the dishwasher for occasional deep cleanings.
  5. The lid and straw may take longer to dry than the bottle because of the threads, enclosed spaces, and small nooks. To avoid a build up of germs and bacteria, make sure all of the pieces are allowed to air dry completely before reusing them. [3]
    • Thoroughly drying your flask is the most important step, so don't skip it! [4]
    • Try washing your Hydro Flask in the evening, that way it can dry overnight and will be ready to use the next morning.
    6. Advertisement
Method 2
Method 2 of 3:

Using Vinegar to Remove Bacteria

PDF download Download Article
  1. Gently swirl the vinegar around in a circular motion to coat the inside of your flask. Allow the vinegar to sit for 5 minutes.
    • Alternatively, fill your Hydro Flask about ⅕ of the way with vinegar and the rest of the way with water. Allow the solution to sit overnight. [5]
    • Using distilled white vinegar to clean your Hydro Flask is the best option for effective cleaning. Using other chemicals like bleach or chlorine can damage the outside of the bottle and cause the stainless steel to rust.
  2. A bottle brush will be the most effective in cleaning the inside of your bottle. It can reach the difficult places and it has a little more friction than a sponge or a dishcloth.
    • Firmly press the bristles along the inside walls of the flask. Be sure to get all the way down to the bottom of the bottle, and underneath the ledge at the top of the flask.
  3. Run warm tap water into your flask. Swirl the water around a few times and then pour the water out. You may need to do this 2 or 3 times to make sure it completely rinsed.
  4. Use a dish drying rack, or prop the bottle up at an angle against the side of the sink. Air needs to be able to circulate in order to prevent bacteria from growing. [6]
    • Make sure your Hydro Flask is ready to use by washing it in the evening and allowing it to dry overnight.
    5. Advertisement
Method 3
Method 3 of 3:

Removing Tough Stains with Baking Soda

PDF download Download Article
  1. Put the baking soda in a small a bowl and stir in a little bit of water. The consistency should be a thick paste.
    • If the mixture is too thick, add a little more water to thin it out. If you put too much water and the mixture is too thin, add a little more baking soda to thicken it.
  2. Dip a bottle brush into the paste, making sure to coat the bristles heavily. Use the brush to scrub the inside of your flask. Target areas that are badly stained by using small, circular motions.
    • Repeat this step as needed. It may take a few goings over to completely remove the stain, so don't worry if the stain doesn't come out on the first go.
  3. Fill your flask with warm tap water. Use the bottle brush along the insides of the flask to loosen up the baking soda paste. Swirl the water around the bottle a few times and then pour it out.
    • Try filling the bottle up about halfway with water, putting on the lid, and gently shaking the bottle up and down. Pour the water out and run fresh water into the bottle. The agitation will help clear out excess residue.
    • Once there is no baking soda residue remaining on the inside of the flask, continue to run the warm water into the flask, swirl it around, then pour it out. Repeat this step 2 or 3 times, or until the water runs clear.
  4. Place the bottle in a dish drying rack, or try propping it an angle against your kitchen wall or the side of the sink. Just make sure it has proper air circulation to prevent bacteria from growing. [7]
    • To help with timing, try washing your Hydro Flask in the evening to allow it to dry overnight and be ready to use the next day.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What if the hydroflask has stickers?
    Rachel DenBraber
    Community Answer
    You should be able to clean the hydro flask the same way if it has stickers. If the stickers are not waterproof you need to be really careful. If the stickers are waterproof, just be gentle with them.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 17
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Do not put your Hydro Flask in the dishwasher. The heat can damage the insulation and/or the outer coating.
        Thanks
        Helpful 1 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Clean a Derma Roller
      Easy & Effective Ways to Clean Dirty Coins at Home
      How to
      Clean Vomit from a Mattress
      How to
      Get Rid of a Musty Smell in Your House
      How to
      Clean Up Vomit & Diarrhea (Plus, Disinfect Contaminated Surfaces)
      How to
      Wash Carpet by Hand: Deep Cleaning & Spot Cleaning
      How to
      Clean Your Sink with Baking Soda
      How to
      Get Rid of Vomit Smell
      How to
      Clean Carpet with a Steam Cleaner
      How to
      Clean Records without Damaging Them
      The Best Ways to Eliminate Throw up Stains & Odors from Carpet
      The Best Ways to Clean Copper or Zinc Pennies
      How to
      Clean Rubber
      How to
      Clean Up Spilled Gas: The Do's & Don'ts
      Advertisement

      References

      1. ↑ https://www.today.com/home/step-step-guide-how-clean-reusable-water-bottles-t76946
      2. ↑ https://youtu.be/L921runl53M
      3. ↑ https://www.usatoday.com/story/news/nation-now/2017/07/10/water-bottles-can-carry-more-bacteria-than-dog-bowl/315941001/
      4. ↑ http://www.wideopeneats.com/often-clean-water-bottle/
      5. ↑ http://www.wideopeneats.com/often-clean-water-bottle/
      6. ↑ http://www.chicagotribune.com/lifestyles/health/sns-201505050000--tms--premhnstr--k-d20150506-20150506-story.html
      7. ↑ http://www.chicagotribune.com/lifestyles/health/sns-201505050000--tms--premhnstr--k-d20150506-20150506-story.html

      About This Article

      Article Summary X

      To clean a hydro flask, start by disassembling the flask before washing each part in hot, soapy water. Pay special attention to the drinking spout, since that's where bacteria tends to grow. Additionally, you can put a cup of white vinegar in your flask for 5 minutes, then scrub the inside of the flask with a bottle brush to remove bacteria. Once you've finished cleaning them, rinse the parts of your flask thoroughly. Finally, let your flask air dry before putting it back together. For tips on how to get rid of stains from your flask, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 223,529 times.

      Did this article help you?

      Advertisement