How to Clear a Cartridge Jam in a Handgun

Co-authored by Roger Judd

Last Updated: July 15, 2024

Have you ever been target shooting, and have a round become jammed in the firearm's action? Here are some suggestions on how to clear the jammed round.

Note: All this assumes the shooter is using the proper cartridge for the pistol, and that the pistol is in proper operating condition.

Method 1

Method 1 of 7:

Handling a jammed handgun safely

Download Article

It is suggested you allow the handgun to remain pointed in a safe direction for several minutes before attempting to clear the jam in the event it is a delayed fire, and not a jam. For rounds that fired and left the empty shell casing stuck in the chamber, this step can be omitted.
Advertisement
If using an approach through the gun's barrel to clear a jam, use pliers or another tool to grip the cleaning rod or other tool you are removing the round with so your hand is never in front of the muzzle.
4
Make sure the ammunition you are using is suitable for your weapon before loading and firing it. Here are examples of potential ammunition problems that can cause jams:
- Old, corroded, bent, or malformed ammunition.
- Ammunition that has been incorrectly reloaded.
- Ammunition that has been exposed to moisture or extreme temperatures.
- Ammunition that is the incorrect caliber or style for your weapon.
Yes, you can probably clear a simple jam and continue shooting your handgun, but in the long run, if there are either mechanical issues or underlying problems with the gun, you might be putting yourself or others at risk by doing so. A trip to a qualified gunsmith might be money well spent.

Method 2

Method 2 of 7:

Clearing a simple jam

Download Article

Open the action and look to see if a cartridge is stuck in the chamber or if another cartridge has failed to load completely.

Method 3

Method 3 of 7:

Clearing a round that doesn't eject

Download Article

This event can be caused by either a weak ejector tang, a dirty chamber, or a damaged shell casing. If sliding the action back doesn't dislodge the jammed round, you may be able to visually inspect the shell extractor, it is a small metal item that grips the edge of the round to remove it from the chamber. If the bend at the end doesn't look clean or is deformed, continuing without repairing it will not be advisable. If the extractor appears to be in good condition, continue reading.
With the action locked open, use a metal pick, or a very small flat bladed screw driver, to pry the edge of the cartridge out of the chamber. Look closely at the chamber and cartridge for visual indications of why the cartridge jammed.
If you are not able to pry out the cartridge, lock the gun's action open and run a cleaning rod down the barrel to push out the jammed cartridge.

Method 4

Method 4 of 7:

Clearing a stovepipe jam

Download Article

This is an event where the spent round failed to extract and another round tried to load behind it.
Pull back on the slide or (in the case of pistols without a true "slide" open the action) and allow the round that failed to load to drop out. This can usually be done by tilting the open side of the action toward the ground, allowing it to simply fall out.

Method 5

Method 5 of 7:

Failure of a round to feed

Download Article

Recognize that the other common event is a fail to feed, which means the old case is not in the way, but the pistol is having trouble feeding a fresh cartridge after firing. This can be caused by a few different issues, the most common being bullets of a shape that don't function well in a particular firearm, but clearing it is the same, regardless. If the pistol is "jammed," that means the next cartridge has been stripped from the magazine, but didn't make it into the chamber in the proper way.
If the loose cartridge did not fall out when you removed the magazine, pull back on the slide (or open the action) and tip the gun, to shake out the loose cartridge (do not re-use that cartridge if it has been deformed).

Method 6

Method 6 of 7:

Deciding whether to continue firing the handgun

Download Article

Is there an immediate need to continue firing, for instance, a self defense situation? If there is an urgent need to continue firing, then do so, but understand there may be risk involved.
Use a pen light to examine the chamber, looking for fouling, rust, or other damage that could cause the cartridge case to hang up. Look at the shells to make sure they are the correct caliber and type for your firearm. There are numerous different 9mm cartridges available, like 9mm Luger, 9mm Parabellum, and .380 Auto. These are not interchangeable. If you cannot ascertain you have the correct ammo, do not reload and fire your weapon.

Method 7

Method 7 of 7:

Revolver Jams

Download Article

If you experience one, you can tap the stuck round out of the cylinder (carefully, especially if it is an unfired round). You will probably find either a very dirty or corroded cartridge or chamber, or the incorrect caliber round.
Note that double and single action revolvers have a mechanism to cycle the cylinder and to align it with the barrel before firing. If the cylinder fails to revolve , you probably need to carry the weapon to a qualified gunsmith for mechanical repairs.

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Consult your local gun dealer or weapons expert for further knowledge.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Never point a loaded firearm at anything you do not intend to shoot.

Thanks
Helpful 3 Not Helpful 2
Always wear eye and ear protection when shooting.

Thanks
Helpful 1 Not Helpful 2