A Complete Guide to Optimizing a Mouse for Gaming

PDF download Download Article
Optimize your mouse settings for enhanced in-game control and accuracy
PDF download Download Article

The most common mistake new players make when approaching any game is to do so with an unconfigured or misconfigured mouse. You should not "get used to your mouse"; your mouse should be "set right for you".

Part 1
Part 1 of 3:

Configuring the Driver

PDF download Download Article
  1. If the cursor seems to be randomly freezing in Windows while you're moving the mouse, that would be an example of just such a tracking error. A half-decent gaming mouse should handle 1000mhz fine.
  2. Many gaming mice (especially older ones) will claim to feature DPIs far in excess of what their sensor can handle, so Google the data-sheets to find out what the native resolution for the sensor really is. Generally between 800 and 1600 DPI is typical for most budget or older gaming mice; better sensors can handle far higher DPIs. [1]
    • This establishes an upper boundary for the subsequent process of tuning your DPI. If your mouse has specific features or quirks which negatively effect performance beyond a certain DPI, treat that as the maximum instead of the sensor's native resolution.
    Advertisement
  3. Razer mouse users can find "Calibration" as a sub-tab under "Mouse" in their Razer Synapse software; and "Manual Calibration" as a sub-tab under that, then click "add a surface" to begin the calibration process. Logitech mouse users can find "Surface Tuning" as an option in their Logitech Gaming Software. Using one of the Logitech presets on an incompatible mouse mat can cause "patchiness" in the mouse's tracking, as if parts of the mouse-mat were dead-zones.
    4. Advertisement
Part 2
Part 2 of 3:

Configuring Mouse Settings

PDF download Download Article
  1. A very rare handful of games make use of your Operating System's mouse settings for sensitivity and / or Mouse Acceleration (generally shoddy console ports, browser-based games, or obscure ultra low-budget titles). In these cases you'll need to adjust these settings in the OS instead of or as well as in the game. [2]
  2. In Windows, go to your Mouse Settings (In Windows 10, hit your Windows key, type in "mouse settings" without the quotes and hit carriage return then click "additional mouse options"). Go to the "Pointer Options" tab. Make sure Pointer Speed is set to the default (middle) position of the slider, and that "Enhanced Pointer Precision" is disabled.
    • When in doubt, test the sensitivity with something simple to see if it's more to your liking. Playing Solitaire is usually a good a idea.
    3. Advertisement
Part 3
Part 3 of 3:

Adjusting In-Game Settings

PDF download Download Article
  1. Most modern games will have these settings available for you to adjust in the Mouse / Controls part of the options menus; if not, they will have them unavailable but correctly set behind the scenes. Older titles might require you to edit configuration or *.ini files in order to force these settings.
    • Some games might use different and ambiguous terminology to refer to the above, for example using "Aim Smoothing" instead of "Acceleration". If in doubt, you can ask each game's community for an explanation.
  2. Generally sensitivity is treated as a numerical multiplier for input, so you would ideally want an in-game sensitivity of "1" (1x your mouse's input). [3] Some games simply have unlabeled sliders for sensitivity, or use their own arbitrary numerical scaling - in which case "lower is generally better".
  3. You don't want to be disturbed or bother other players while you're fine-tuning your configuration, so it's best to tinker while you're in practice mode.
  4. In a first-person shooter pick one fixed position, strafe left-and-right (ideally as one of the faster characters in the game) and try to keep your crosshair on that fixed point. In a MOBA, set your character walking around the map (with your view fixed, not locked to the character, of course) and keep your cursor following him or else any other moving target on the map (a creep, for example).
    • If your mouse-hand is pulling the crosshair off the point / cursor off your character you are "overshooting" what you are aiming for, and as such either your DPI or your Sensitivity is too high. If you can lower your DPI to fix this whilst keeping your Sensitivity at 1, do so. Otherwise you'll have to lower your Sensitivity below 1 to compensate instead.
    • If your strafing is pulling the crosshair off the point or your target is out-running the cursor in a MOBA, you are "undershooting" what you are aiming for and your DPI or Sensitivity is too low. If your mouse's DPI is below the maximum NATIVE resolution for its sensor, you should raise the DPI until you no longer undershoot. If your mouse's DPI is at the native resolution, or you cannot change your mouse's DPI, you need to increase the sensitivity instead.
  5. For example, the centre of two different posts on the same wall, between a couple of boxes in a map, between your character and a nearby tower in a MOBA.
    • If your crosshair / cursor goes past what you're trying to aim at, you are "overshooting", and need to lower your DPI or Sensitivity as described in the previous Step.
    • If your crosshair / cursor doesn't quite reach what you're trying to aim at, you are "undershooting" and need to raise your DPI or Sensitivity as described in the previous Step.
    • Repeat this step as many times as necessary in order to fine-tune this to perfection.
  6. Repeat the previous step whilst zoomed, but adjust the game's "zoomed sensitivity multiplier" instead of adjusting DPI or base-sensitivity.
    • This value might be represented by sliders for different scope magnifications (as in PUBG); or a numerical slider under an individual hero's control-configuration (as with Widowmaker in Overwatch, with the number representing a percentage of base sensitivity); or just a numerical variable controlled via a console command or configuration file script (zoomed_sensitivity_ratio in TF2).
    • Some games (for example, World of Tanks) have a separate in-game Sensitivity slider for top-down views (artillery). The same principle applies.
    7. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • A heavier mouse requires more effort to overcome inertia (to start moving and then to stop it again). If your gaming mouse has adjustable weights, then lighter offers greater control and precision over heavier. [4]
        Thanks
        Helpful 0 Not Helpful 0
      • The software suite that came with your mouse might enable the use of "profiles"; which not only allows you to have a separate sensitivity / DPI profile for OS desktop usage and web-browsing to gaming, but might even be sophisticated enough to give you a different profile for each individual game that you play.
        Thanks
        Helpful 0 Not Helpful 0
      • If your mouse isn't a gaming mouse, or lacks a comprehensive driver package and the features that provides, you can still safely ignore the first part of this guide.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • "Effective sensitivity" (how much relative crosshair movement you get out of any mouse movement) will change if you change polling rate, DPI, screen resolution, screen field-of-view, etc, etc. Making sure you've got these locked down to the best values first before you settle on the right DPI or Sensitivity for you is important.
        Thanks
        Helpful 1 Not Helpful 0
      • Although modern sensors can handle DPIs far in excess of what most users will require, some (but not all) will introduce increasing levels of hardware "smoothing" at higher DPIs to eliminate jitter, which can introduce small amounts of latency, and might negatively effect how the mouse feels.
        Thanks
        Helpful 0 Not Helpful 0
      • It is possible to use third party software to "overclock" budget / non-gaming mice to higher polling rates. Users might see some benefit from this, but it may also introduce problems, and is generally unnecessary.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      5 Ways to Use a Keyboard to Click & Move a Mouse on PC & Mac
      How to
      Easily Connect a Wireless Mouse to Your Computer
      How to
      Use Your Computer Without a Mouse: Shortcuts & Mouse Keys
      Connecting a Logitech Wireless Mouse via Bluetooth or Receiver
      2 Ways to Pair a Logitech Mouse to a Unifying Receiver
      21 Reasons Why Your Mouse is Freezing (and How to Fix Them)
      How to
      Adjust Your Mouse Speed, Sensitivity, & More
      How to
      Replace Dead Batteries in an Apple Magic Mouse
      4 Quick Ways to Change Mouse Sensitivity on a Computer
      How to
      Extend Wireless Range of a Wireless Keyboard and Mouse
      How to
      Use a Computer Mouse
      10 Ways to Troubleshoot a Logitech Mouse
      The Fastest & Easiest Ways to Charge Your Apple Magic Mouse
      How to
      Remove Dirt and Grime from Your Optical Mouse
      Advertisement

      References

      1. ↑ ioStux, "Aim Secrets: Pixel Skipping causing bad Aim is a Myth"
      2. ↑ TheWarOwl, "Finding Your Sensitivity and Mouse Settings"
      3. ↑ ioStux, "Aim Secrets: Pixel Skipping causing bad Aim is a Myth"
      4. ↑ ioStux, "Aim Secrets: Modding your Mouse"

      About This Article

      Thanks to all authors for creating a page that has been read 53,961 times.

      Is this article up to date?

      Advertisement