How to Countersteer (Motorcycle)

PDF download Download Article
PDF download Download Article

The basic mechanics of countersteering are performed by every kid who's ever ridden a bicycle. You're already doing it if you're riding a motorcycle. At higher motorcycle speeds, however, it's important to have a basic understanding of the process of leaning into a turn, increasing the acuity of the intended turn. Countersteering doesn't mean turning your handlebars away from a turn - rather, you're pushing on the handlebar to initiate a lean. This push on the handlebar will have your wheel heading very briefly in the wrong direction, and then as a result of the lean of the wheel your bike immediately recovers and heads the direction you want to go. By understanding what countersteering is and how it works, any rider can make more controlled turns at higher speeds, steer away from hazards, and ride with less fatigue.

Method 1
Method 1 of 4:

Preparing to Countersteer

PDF download Download Article
  1. You don’t want to be pulling down on the handlebars. If you do that, you’ll essentially be fighting against the bike. If the road is bumpy or has potholes then your handlebars are bound to jerk around a little bit. Allow for these small movements. [1]
  2. Since you won’t be gripping onto the handlebars with your arms really tightly, it’s important to anchor yourself by hugging the motorcycle with your knees. It doesn’t need to be a death grip, just enough to keep you sturdy. You can also hold down on the pegs with the heels of your boot.
    Advertisement
  3. If you have to decelerate, downshift, or, worst of all, brake, in the turn then you have entered the turn too quickly. Brake before the turn, consider your entering strategy, and then enter it smoothly. You may want to enter the turn differently depending on the camber of the road and the type of turn, but generally use the delayed apex strategy. This means entering the turn on the outside and then scooting back to the inside as you clear the apex of the turn. [2]
    4. Advertisement
Method 2
Method 2 of 4:

Approaching the Turn

PDF download Download Article
  1. If you want to turn right, push the handlebars on the right side. If you want to turn left, push the handlebars on the left side. While this may seem incorrect, turning the bars in the opposite direction from the turn forces the bike to tilt slightly, while maintaining the proper speed allows it to stay upright. [3]
    • Memorize this countersteering mantra: Turn right, push right. Turn left, push left.
  2. As you approach your turn, signal at least 100 feet (37 meters) before the turn, and check your mirrors for signs of traffic. Move to the outside third of your lane–the corner opposite the direction of your turn. Don’t go so far that you’re putting yourself in danger of oncoming traffic. Just chose the outer third so that you can enter the turn with enough room to swing back to the inside.
  3. Turning on a motorcycle is dependent on the speed you are traveling, so it's important to brake on your approach to the turn, then hold steady on the throttle during the turn. Downshift before the turn if necessary, but never in it. You can shift into a higher gear during the turn if you want to, but don't do this until you get more comfortable.
    • The balance of the motorcycle is gyroscopic, which means that speed keeps it up. Depending on the grade of the turn you're making and the speed at which you're traveling, you'll probably need to slow down some.
    • Never, under any circumstances, should you slow in the middle of a turn, or brake in the middle of a turn, unless there's some emergency. Even then, it's safer to evade than to attempt to stop. If you absolutely must stop then level your handlebars out before you start to brake. Square your handlebars and then apply progressive pressure to both brakes at the same time. 70 % of your stopping power comes from your front brake, but don’t grab it – especially in a turn. Apply progressive pressure. [4]
    4. Advertisement


Method 3
Method 3 of 4:

Countersteering in the Turn

PDF download Download Article
  1. This means that if you are turning right, you'll want to push the handlebar to the right. This is different than turning in close quarters. You are essentially keeping your handlebars square but initiating a lean. Gently, increase pressure from your palm on the handlebar, pushing it gently. Logically it may seem as if you were trying to turn the bike in the opposite direction you want to turn. However, as you do this, lean gently into the turn while shifting your weight slightly in the direction you want the bike to tilt. [5]
    • Again, while that may seem counterintuitive at first, this is the principle of counter-steering, turning the front wheel slightly to drop the bike into a gentle lean, which allows for greater stability during a turn.
    • The sharper you want to make the turn, the greater your lean angle should be.
  2. Maintain pressure on the handlebars and look through the turn to the road ahead of you. Avoid looking at the side of the road or other distractions as target fixation can cause you to go directly toward it. Look at the path in the road you want to be on.
  3. Don’t decelerate during the turn or let off the throttle. You don’t have to speed up in the turn, just keep the throttle steady. If you need to let off it at all that means you entered the turn too fast. Try to have confidence in your bike. Just because it is leaning doesn’t mean it’s about to fall over – as long as you keep pressure on the throttle you should keep friction with the road. By holding down the throttle you’re pushing that back wheel into the road and keeping the bike steady.
  4. Don’t look at the ground. If your vision is wrong you’ll end up crashing. If you look at the ground, you’ll go to the ground. Keep your eyes where you want to be going – that’s not directly ahead of you, that’s at the exit point of the turn. Vision is incredibly important while countersteering. [6]
  5. When you are exiting the turn, release some pressure on the inner handlebar and add some more pressure on your throttle. Now push slightly on your outer handlebar and your bike will come back upright. This doesn't need to be a dramatic pushback to the outside, just a slight nudge as you release pressure on the inside handlebar.
    6. Advertisement
Method 4
Method 4 of 4:

Countersteering on a High Speed Track

PDF download Download Article
  1. To stay stable in turns at high speed, it's common to apply only your front brake during the downshift. This should occur on the outside of the lane, opposite the direction you want to turn, and in the straight, just before the grade begins. You should immediately transition from slowing into accelerating into the turn.
    • Higher torque engines have a tendency to spin out in the back tires, so depending on what kind of motor you've got, you may want to downshift more, accordingly. Listen to your bike and get a feel for its capabilities at speed before you try to push it.
    • This section assumes racing road conditions and dry asphalt.
  2. As you approach the grade, countersteer away from the turn and lean toward it, at no more than 45 degrees on the angle. You shouldn't have to throw much weight, but you might need to adjust your body position slightly to maintain stability at higher speeds.
  3. More aggressive turns such as those done by competitors on sports bikes may require riders to adjust their body positions, such that the torso is parallel to the bike on the right side, and dropped low beside the fuel tank.
    • Position your head correctly. The helmet should be in a position near the right handlebar and the right leg cocked outward on the peg at about 45 degrees, with the ball of the foot on the peg and the heel up against the bike.
  4. As soon as you secure yourself in your lean, accelerate the motorcycle through the apex of the turn. Keep your lean angle as stable as possible and accelerate the bike up slowly throughout the turn.
    • The gear you use will depend on many things, the style of the bike, the road conditions, the grade, and the speed that you're traveling. There's no one gear for turning fast.
    • Maintain a stable lean throughout the apex of the turn, dragging your knee if necessary. The right knee may drag on the ground if properly equipped and the lean angle is aggressive enough, in competitive racing.
  5. As they exit the grade, racers will right themselves by countersteering back the other direction, into the direction of the turn which was just completed. This should allow you to pop up into a stable, upright position and throttle up.
    • Shift your body back to a centered and low position on the bike for stability.
  6. Most of the time, you'll need to shift up immediately after a turn to continue accelerating at high speed, having drifted toward the outside edge of the track again.
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I stop my motorcycle in the shortest distance possible?
    Community Answer
    Try braking front mostly and rear a bit, without allowing ypur wheels to skid. Leaving the engine in gear until the last moment might help prevent the rear from locking up completely.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 14 Helpful 14
  • Question
    After I do the slight push, do I ease off pressure to let the lean take the bike where I want to go?
    Community Answer
    Trust the countersteer. It will turn for you, make sure you have some speed, above 15 mph, and not too much pressure at once. Let it turn for you. Learn how it feels, then forget it and just go by instinct.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 2
  • Question
    Can you lean your bike too far?
    mishablade worgen
    Community Answer
    Yes, you lean too far and if this happens, it's likely you will fall off! The more you lean into a corner, the faster you have to go to maintain balance. It is recommended that you turn corners slowly and don't lean too far.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 2
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Never grab on your break during a turn. Your wheel will wash out and you will crash.
        Thanks
        Helpful 19 Not Helpful 4
      • Do not over-apply pressure ( gentle means gentle ) or you will crash.
        Thanks
        Helpful 14 Not Helpful 7
      • Begin practicing this (and any other new motorcycle skill) in an empty parking lot or - even better - during a Motorcycle Safety Course.
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Match Rev Downshift a Motorcycle
      How to
      Perform Clutch Wheelies on a Motorcycle
      How to
      Look Like a Biker
      How to
      Find the Chassis and Engine Number
      How to
      Ride a Motorcycle for Beginners
      How to
      Shift Gears on a Motorcycle
      How to
      Ride a Manual Motorcycle
      How to
      Start a Motorcycle
      How to
      Brake Properly on a Motorcycle
      How to
      Measure Helmet Size
      A DIY Guide to Repainting Your Fairings at Home
      How to
      Paint a Motorcycle
      How to
      Ride on the Back of a Motorcycle
      How to
      Remove a Sun Visor
      Advertisement

      References

      1. ↑ https://www.webbikeworld.com/learn-counter-steer/
      2. ↑ https://www.webbikeworld.com/learn-counter-steer/
      3. ↑ http://www.ridinginthezone.com/countersteering-will-save-your-life/
      4. ↑ https://www.webbikeworld.com/learn-counter-steer/
      5. ↑ http://www.stevemunden.com/countersteering.html
      6. ↑ http://www.stevemunden.com/countersteering.html

      About This Article

      Article Summary X

      To countersteer a motorcycle, keep your arms relaxed and parallel to the ground, and anchor yourself to the bike using your knees. As you approach the turn, move to the outside third of your lane and slow your bike. To start the turn, push the handlebars on the same side as the turn you want to make, then lean gently into the turn by shifting your weight slightly in the direction you want the bike to tilt. At first, the bike will tilt in the opposite direction of the turn, but as you lean, it will start to turn the other way. To learn how to accelerate out of the turn, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 291,785 times.

      Reader Success Stories

      • Stelios

        May 17, 2016

        "Very helpful and well-documented article. Riders--beginners or not--should read so they know the mechanics of the ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement