Download Article
Download Article
Cork board is really soft and easy to cut, so you can realistically use basically any knife or blade to cut it. However, when it comes to making things easy, your best options are the utility knife and scissors. Since cork board is so forgiving and easy to cut, there is no shortage of craft projects that involve cutting cork. So break out the cutting board and let your imagination run wild to turn that boring old cork board into something truly unique!
Steps
-
Print an image and tape it to the cork board to create a template. If you’re cutting shapes out, print the image on a piece of printer paper. Then, place it on the board where you want to cut it out. Use regular clear tape to attach it to the corkboard and hold it in place. [1] X Research source- Make sure that you smooth any wrinkles out before taping it down!
Tip: If you plan on doing a lot of cork-based crafts, buy a die cutter and some templates. A die cutter is a small machine with a crank wheel that will punch shapes out of the cork board using the templates you choose. This is probably the best way to mass-produce cork board crafts! [2] X Research source
-
Trace a stencil or object to transfer an outline if you prefer. If you have an actual object or stencil that you want to use, set it down on the cork board and trace it using a fine-tipped permanent marker. You can try cutting around the shape or stencil with your utility knife if you prefer, but you’ll risk cutting the stencil up or damaging your item. [3] X Research source- You can always draw directly on the corkboard if you want. There’s nothing wrong with doing it freehand if you know what you’re going to cut out.
Advertisement -
Use a straight edge to cut perfectly straight lines out. If you want to make any perfectly straight cuts, grab a metal ruler. Place the ruler down along the line you want to cut and brace it with your nondominant hand. Then, drag the utility knife along the edge or use the straight edge to guide your scissors to carve a perfect line. [4] X Research source
- Don’t use a plastic or wood straight edge. You may cut out a chunk of the plastic or wood if you do.
- You can use a paper cutter to make straight cuts on those really thin rolls of cork board.
Advertisement
-
Grab a sharp utility knife to cut cork thicker than 1 ⁄ 4 in (0.64 cm). If you have thicker cork, like the kind you find in a bulletin board, the easiest way to cut it is with a utility knife. The pen-shaped thinner knives are usually best, but you can use a bigger box cutter-style utility knife if the cork is really bulky. [5] X Research source- You can use basically any sharp object to cut cork, but a utility knife is the easiest to handle without breaking any chunks of the material off. In a pinch, you can use a non-serrated kitchen knife. This is usually unnecessarily sharp for cork boards, though.
- This is not the ideal option if you’re cutting wine corks ; you’ll want to use scissors or a kitchen knife for those.
- You can certainly use a utility knife to cut thinner cork if you really want to, but you cannot use scissors to cut thicker cork.
-
Set a cutting board underneath the cork to protect your furniture. Grab a cutting board and lay it down underneath the cork that you’re cutting to keep your table from getting scratched up by your utility knife. If you’re in a pinch, you can lay down 2-3 sheets of cardboard instead. [6] X Research source -
Dig the blade into the cork until you feel the cutting board underneath. To start your cut, use the tip of your knife to puncture the cork board from above. Push the blade down through the cork until you feel the hard surface underneath. If you don’t push all the way through the cork, you may need to make additional cuts. [7] X Research source
- Hold the knife with your index finger on top of the handle near the base of the blade and support the knife from the side with your thumb. Tuck your other fingers under the handle to stabilize it.
Tip: If you find some thicker cork really difficult to cut, fill a pot with water and turn the heat to medium. If your cork fits in the pot, go ahead and drop it in the water for 2-3 minutes. If it’s too big for the pot, use a pair of tongs to hold the cork over the steam for 3-4 minutes. This will soften the cork and make it easier to cut!
-
Drag the blade through the cork at a 45-degree angle to make your cut. Pull the handle a towards you as you drag the knife through the cork. Let the blade rest at a 45-degree angle to make it easier to slice your way through the board. Continue dragging the blade until you’ve completed the cut. [8] X Research source
- If the cut doesn’t go all the way through, simply make the cut again and use the groove you created from the first cut as a track for the second attempt. It may take 2-3 cuts to get all the way through a thick piece of cork.
- You can turn the blade by rotating your wrist as you move it if you need to make an uneven cut.
Advertisement
-
Grab some sharp scissors to cut cork thinner than 1 ⁄ 4 in (0.64 cm). Scissors are probably the easiest option if you’re cutting that thin cork that you find rolled up for shelving or craft projects. You can use a utility knife if you prefer, but this thinner cork is more likely to get caught on the blade of a utility knife if you don’t brace it while you cut. [9] X Research source- Any pair of scissors should work for this so long as the blades are sharp and they aren’t serrated.
-
Use the scissors to cut through the cork. Hold the cork in your nondominant hand and open the blades of the scissors. Press them against the edge of the cork and slowly close the handles to cut through the board. This feels kind of like cutting thin cardboard, so it shouldn’t be particularly hard to cut.
Warning: Keep your fingers at least 3 inches (7.6 cm) away from the scissor blades to avoid cutting yourself.
-
Rotate the cork in your hand to change the angle of your cut. You can turn the scissors to make a variety of cuts but it’s a lot harder than simply turning the cork board itself. When you’re making a round or angular cut, turn the cork not the scissors. You’ll find it much easier to cleanly slice through the board.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- It’s not easier or harder to make curved or straight cuts with one tool or another—this has more to do with the thickness of the cork. For example, a utility knife is better for straight and curved cuts if you have thicker cork, while scissors will be easier to work with for thinner cork.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- You can usually sand wood edges after you cut them to remove any splinters, but cork is technically made out of bark. It’s more likely to break apart than smooth down if you try to sand the edges out.Thanks
Advertisement
Things You’ll Need
Marking Your Cuts
- Paper
- Printer
- Stencil
- Permanent marker
- Metal ruler
- Die cutter (optional)
- Die cutter templates (optional)
Slicing Thick Cork with a Utility Knife
- Utility knife
- Cutting board
- Pot
- Water
Using Heavy-Duty Scissors for Thin Cork
- Scissors
References
- ↑ https://youtu.be/D-jb4fSBsLk?t=259
- ↑ https://youtu.be/QBd47vJ0b0s?t=34
- ↑ https://experthometips.com/diy-cork-board-tutorial
- ↑ https://youtu.be/seXAwAFCpu8?t=104
- ↑ https://youtu.be/D-jb4fSBsLk?t=52
- ↑ https://youtu.be/D-jb4fSBsLk?t=119
- ↑ https://youtu.be/seXAwAFCpu8?t=167
- ↑ https://youtu.be/seXAwAFCpu8?t=180
- ↑ https://experthometips.com/diy-cork-board-tutorial
About This Article
Thanks to all authors for creating a page that has been read 38,224 times.
Advertisement
