How to Cut Fabric

PDF download Download Article
PDF download Download Article

Cutting fabric is easy, but knowing how to do it the right way can make your sewing project easier. If you don't take the necessary preparatory steps, such as pre-washing, your finished garment could end up being too small, especially after the first time you wash it. Once you know the basics of preparing and cutting fabric, you can alter your technique to cut specific types of fabric, such as faux fur or chiffon.

Part 1
Part 1 of 4:

Evening Out the Cut Edges

PDF download Download Article
  1. The selvage edge is the densely-woven strip along the top and bottom edges of the fabric. In some cases, it may have a clean, finished edge. In other cases, it may look frayed. You will typically find it on both the top and bottom edges of the fabric. [1]
    • On many printed cottons, the selvage edges are left white and unprinted.
  2. Pull on the top-left and bottom-right corners, then pull on the top-right and bottom-left corners. Depending on the size of the fabric, you may need to get someone to help you. [2]
    • This is especially important if you are working with stretchy, woven cotton.
    Advertisement
  3. Find a thread along your selvage edge, about 1 inch (2.5 cm) from the left cut edge, and pull it out. Repeat this step for the right cut edge. When you are done, you'll have a thin line on each side of your fabric, from selvage to selvage. [3]
    • This is best for woven fabrics, like cottons and linens. It will not work on densely-woven, knitted, or stretchy fabrics, including faux furs and velvet.
    • If the fabric was cut unevenly, your thread may not hit the opposite selvage edge. If that happens, pull another thread out further away from the last one.
    • Don't worry if the thread breaks. Just find the broken end and continue pulling.
  4. Align the ends of a long ruler with the top and bottom selvage edges. A square would be even better. Use a dressmaker's chalk or pen to draw a line along the ruler/square.
    • This is useful for knit and stretchy fabrics, such as jersey. It's also a good technique to use on fake furs and other densely-woven fabrics, such as velvet.
    • A square is a type of measuring device. It is shaped like a half-triangle, with a horizontal, vertical, and diagonal ruler.
  5. You should do this whether you pulled a thread out or drew the line. A pair of fabric scissors will work the best if you pulled the thread out. [4] A rotary cutter will work better if you drew the line on.
    6. Advertisement
Part 2
Part 2 of 4:

Cutting the Pattern and Fabric

PDF download Download Article
  1. Cut the pattern out using regular scissors. Do not use your fabric scissors to do this. Even though pattern paper is very thin and delicate, it can still ruin your scissors. Make the extra effort, find another pair of scissors, and use them to cut the pattern out. [6]
    • If the pattern is badly creased, iron it flat using a dry iron. This way, you won't distort the pattern when cutting it.
  2. Spread the fabric out on a flat surface and smooth out all of the wrinkles. Pin the pattern to the fabric according to the layout printed inside the instructions. Pay attention to the grain lines on the pattern. These appear as long arrows. They need to be parallel to the grain/selvage edge of your fabric. [7]
    • If there is no pinning layout, use your best judgment to arrange the pieces.
    • If your pattern has a straight edge and the word "FOLD" printed alongside it, align it with the folded edge of your fabric.
  3. Use colored tailor's chalk if the fabric is light, and white tailor's chalk if the fabric is dark. You can also use a tailor's pen if the fabric is light. Once you have traced all of the pattern pieces, unpin them and set them aside. [8]
    • Be sure to trace all of the darts and notches as well.
    • Tracing the pattern means that you'll be cutting right along the fabric and won't have to worry about accidentally cutting the paper and ruining your scissors.
  4. Use one hand to hold the fabric steady, and the other hand to cut the fabric. Make sure that the fabric scissors are sharp. If they don't cut through the fabric easily, or if they leave behind a ragged edge, they are too dull and need to be sharpened. [9]
    5. Advertisement
Part 3
Part 3 of 4:

Cutting Specific Types of Fabric

PDF download Download Article
  1. If you cut faux fur from the front, you risk cutting into the fur itself and shortening it. Flip your faux fur over, and trace your pattern onto the back/wrong side. Cut along the lines that you drew using a box cutter or fabric scissors. [10]
    • If you are using fabric scissors, make sure that you glide the bottom blade through the fibers. You want to cut through the backing of the fur, not the fur itself.
  2. Set your leather down on a cutting mat with the right side facing up. Set the pattern on top and trace around it; do not pin the pattern, or you will leave behind permanent holes. Cut along the lines that you drew using a rotary cutter. [11]
    • You can find rotary cutters alongside the fabric scissors in a fabric store and a craft store.
    • If the pattern keeps slipping, use paper clips or clothespins to secure it to the edges.
  3. Mist slippery fabric, like chiffon, with water. Let it soak through, then set your pattern on top and pin it in place. Cut around the pattern, taking care to avoid the paper, then remove the pins. [12]
    • Don't use a dress maker's pen on the wet fabric, or it will bleed.
    • You can try using a dressmaker's chalk on the wet fabric, especially if it can be used wet, like a watercolor pencil.
  4. Placing tissue paper behind the fabric will make cutting it easier. Do this if you are having trouble cutting the fabric. Sharpen your scissors afterwards. [13]
  5. When cutting solid-colored fabrics, you will often fold the fabric in half first to save time. When it comes to prints, however, you want to cut out your first set of pieces first, then use them to match the prints for the second set. [14]
    • You will need to be more fabric than the pattern calls for when working with prints, especially stripes.
    • Keep the direction of the prints in mind. If your fabric has palm trees on it, make sure that they are right-side-up!
    6. Advertisement
Part 4
Part 4 of 4:

Washing, Drying, and Ironing the Fabric

PDF download Download Article
  1. When you buy fabric off the bolt in a store, take a look at one of the side edges of the bolt. If you see any instructions on how to wash, dry, and iron the fabric, write them down. If you don't have anything to write with, snap a picture with your phone or camera instead. [15]
    • If you forgot to record the washing, drying, and ironing instructions, look the fabric type (i.e.: cotton, chiffon, wool, etc.) online.
  2. This includes prints, stripes, and plaids. It is especially important if you will be sewing a garment. When you sew a garment, you will have to match up the patterns on the seams. This means that you will end up using more fabric than the pattern calls for. Anywhere from a 1 ⁄ 4 to 1 ⁄ 2 inch (0.64 to 1.27 cm) extra would be a safe bet.
    • You can disregard this step if you are cutting fabric for an item without seams, such as curtains.
  3. Fabric tends to shrink after it is washed. You need to do this before you start cutting or sewing the fabric. If you don't, your finished piece will shrink considerably the first time you wash it. [16] Keep in mind that some fabrics need to be dry cleaned. In this case, take it to an experienced dry cleaner.
    • You don't need to pre-wash muslin if you are using it for fitting or drafting.
    • You don't need to pre-wash fabric that's already been preshrunk. The bolt should say whether or not the fabric has been preshrunk.
    • Take the fabric out of the washer/dryer right after it's done washing/drying. This will reduce wrinkles.
  4. Some fabrics don't wrinkle at all, so you may be able to skip this step. If you got the fabric dry cleaned, then it should already be pressed for you. If your fabric has wrinkles in it, however, you will need to iron them out. Remember to use the iron setting recommended on the bolt. [17]
    5. Advertisement

Video

Expert Q&A

Search
Add New Question
  • Question
    How do I make clean, neat cuts?
    Kpoene Kofi-Bruce
    Couture Bridal Designer
    Kpoene Kofi-Bruce is a tailor, couture wedding gown designer, and the Creative Director of Mignonette Bridal and Ette the Wedding Tailor in Chicago, Illinois. With nearly two decades of experience as a wedding gown designer, small business owner, and vintage sewing enthusiast, Kpoene specializes in wedding gown design and the social history of wedding dresses. She received a BA in Creative Writing from Middlebury College and studied the business of fashion at the Fashion Institute of Technology. She is also a graduate of the Goldman Sachs 10KSB program and the Chicago Fashion Incubator and has written about wedding fashion for Jezebel, Catalyst, the Sun Times, and XO Jane.
    Kpoene Kofi-Bruce
    Couture Bridal Designer
    Expert Answer
    Make sure you have good, sharp scissors, and utilize fabric weights or pins to make sure the fabric doesn't shift, especially if you're working with something like silk satin or flimsy fabrics. Also, be patient while you're cutting. Cutting is my least favorite step because I'm so anxious to get started sewing, but you will quickly find that patience during this step equals great results!
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 6
  • Question
    How do I stop the edges of fabric from fraying?
    Community Answer
    There are many ways to achieve this goal. You can try fusible interfacing strips, which you iron to the edges of the fabric so that the ends of each thread are attached to something. There are also special glues that can accomplish the same thing. If you have access to a sewing machine, you can hem the edges of the fabric quite easily. If you don't have a sewing machine, you can also hand sew a hem into place. Folding the edge over slightly for this step is helpful as well.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 3
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Sewing pins can get dull! If your sewing pins don't slide easily through your fabric, they are dull and you should purchase new ones. [18]
        Thanks
        Helpful 0 Not Helpful 0
      • Don't rip your fabric. It may save you time, but it won't give you a clean or straight line. It may actually distort the fabric. [19]
        Thanks
        Helpful 1 Not Helpful 0
      • Fabric stores don't always cut the fabric evenly. If you know that your fabric store is guilty of this, plan on buying an extra 1 ⁄ 4 inch (0.64 cm) to make up for any unevenness. [20]
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Fabric scissors
      • Regular scissors (if using patterns)
      • Sewing pins (if using patterns)
      • Iron

      You Might Also Like

      How to
      Determine if Silk is Genuine
      How to
      Unwrinkle Tulle (With or Without a Steamer or Iron)
      How to
      Adhere Fabric to Wood
      How to
      Clean Faux Fur
      How to
      Dye Faux Fur
      6 Easy Ways to Make Your Fabric Waterproof: A Complete Guide
      How to
      Tell the Difference Between Real Fur and Faux Fur
      How to
      Wash Burlap
      How to
      Make Felt
      How to
      Dye Tulle
      How to
      Make a Tulle Tutu
      How to
      Gather Fabric into Ruffles
      How to
      Test if Fabric Is Linen
      How to
      Sew Organza
      Advertisement

      References

      1. ↑ https://so-sew-easy.com/5-mistakes-to-avoid-when-cutting-fabric/
      2. ↑ https://so-sew-easy.com/5-mistakes-to-avoid-when-cutting-fabric/
      3. ↑ https://katrinakaycreations.com/3-things-you-need-to-do-before-you-cut-your-fabric/
      4. ↑ https://katrinakaycreations.com/3-things-you-need-to-do-before-you-cut-your-fabric/
      5. ↑ Kpoene Kofi-Bruce. Couture Bridal Designer. Expert Interview. 28 January 2021.
      6. ↑ https://sewguide.com/cut-fabric-sewing/
      7. ↑ https://sewguide.com/cut-fabric-sewing/
      8. ↑ https://sewguide.com/cut-fabric-sewing/
      9. ↑ Kpoene Kofi-Bruce. Couture Bridal Designer. Expert Interview. 28 January 2021.
      1. ↑ https://www.seamsandscissors.com/how-to-sew-fur/
      2. ↑ https://sewguide.com/cut-fabric-sewing/
      3. ↑ https://sewguide.com/cut-fabric-sewing/
      4. ↑ https://sewguide.com/cut-fabric-sewing/
      5. ↑ https://sewguide.com/cut-fabric-sewing/
      6. ↑ https://katrinakaycreations.com/3-things-you-need-to-do-before-you-cut-your-fabric/
      7. ↑ https://katrinakaycreations.com/3-things-you-need-to-do-before-you-cut-your-fabric/
      8. ↑ https://katrinakaycreations.com/3-things-you-need-to-do-before-you-cut-your-fabric/
      9. ↑ https://www.craftsy.com/post/how-to-cut-fabric-for-sewing/
      10. ↑ https://so-sew-easy.com/5-mistakes-to-avoid-when-cutting-fabric/
      11. ↑ https://so-sew-easy.com/5-mistakes-to-avoid-when-cutting-fabric/

      About This Article

      Article Summary X

      Before your cut your fabric, make sure to wash it in accordance with the care instructions on the bolt so that it doesn't shrink. Once your fabric is washed, cut off the selvage and then lay out your fabric so that it is square. If you are working with a pattern, pin the pattern to the fabric based on the instructions and use fabric chalk to trace around the pattern. Then, you can remove the pattern and use sharp fabric scissors to begin cutting. For more about how to cut different types of fabrics, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 97,233 times.

      Reader Success Stories

      • Julie Baquiran

        Nov 15, 2021

        "wikiHow is the most helpful reference. I got all the info, pictures and all I need for my teaching. Thank you so ..." more
      Share your story

      Did this article help you?

      Advertisement