How to Safely Cut Medium-Density Fiberboard (MDF)

PDF download Download Article
A handy DIY guide on how to perfectly cut medium-density fiberboard
PDF download Download Article

MDF, or medium-density fibreboard, is a type of engineered wood made by combining wax, resin, and wood fibres. Though MDF may look similar to plywood, the material itself is far denser, which means that cutting it takes some special blades and techniques.

Method 1
Method 1 of 3:

Keeping Yourself Safe

PDF download Download Article
  1. Before handling or cutting through your MDF piece, make sure to put on a pair of heavy-duty working gloves and a durable, long-sleeved shirt. This will give you a small layer of defense against rough MDF edges and your saw blade. [1]
    • To avoid getting caught in the saw blade, do not wear clothing with loose sleeves.
  2. When cut, MDF releases a massive amount of dust particles into the air. To make sure this dust doesn’t get into your eyes or throat, wear a high quality dust mask and a pair of clear safety goggles while working. [2]
    • MDF dust particles are not inherently dangerous, but the sheer amount of them may lead to unwanted irritation.
    Advertisement
  3. Since MDF releases so much dust, try to cut your wood outside or in an open room like a garage. If you don’t have a clear space to work in, open any windows or doors near the cutting area so the dust has a way to escape. If you’d like, place a fan in the room to help blow the dust outside. [3]
    • Cover objects around your working area in thin plastic sheets to keep them from getting dirty.
    4. Advertisement
Method 2
Method 2 of 3:

Making Straight Cuts

PDF download Download Article
  1. To make straight cuts in your MDF, acquire a circular saw that has a cutting speed between 3,000 and 3,350 metres per second (9,800 and 11,000 ft/s). For the best cut possible, install a fine blade that has at least 60 teeth and a width of about 355 mm (14.0 in). For additional strength, pick a blade that has a carbide tip.
    • You can find circular saws at most home improvement stores. High-quality models typically cost between $100 and $300.
    • Before installing the blade, make sure you unplug the device to prevent any accidents.
  2. Position your circular saw so that the bottom of the saw blade sits flush against the side of your MDF board. Then, loosen your saw’s depth knob or lever and carefully move the blade until the tip sits just below your MDF plank. When you’ve positioned the blade where you want it, retighten the depth knob or lever. [4]
    • To ensure the blade cuts properly, try to position it so that the tip sits between 1 ⁄ 8  in (0.32 cm) and 1 ⁄ 4  in (0.64 cm) below the MDF plank. [5]
  3. Place your MDF piece on a large working table or, if you’re cutting through the middle of the plank, place each end on a separate working table or saw horse. Make sure the area you need to cut hangs over the edge of the surface, then lock the MDF in place using heavy-duty clamps.
  4. Using woodworking tape or a pencil, create a line on top of your MDF piece indicating the area you wish to cut through. Since you can only cut through the wood once, double check the line’s length using a tape measure and its alignment using a level or L-square.
    • If you’re using a pencil, make sure the line is thick enough that you can see it easily from a distance.
  5. Line up the front of your circular saw with the beginning of your marked line. Then, turn the saw on and gently push it through your MDF piece. Do your best to hold the saw steady, and make sure your cutting speed is slow and consistent. [6]
    • If you feel your saw jitter or kick, turn the device off and let it rest for a minute.
    6. Advertisement
Method 3
Method 3 of 3:

Creating Curved Cuts

PDF download Download Article
  1. To make curved cuts in your MDF piece, acquire a jigsaw that is compatible with quick-change blades. Then, purchase a bi-metal jigsaw blade and place it inside your device’s blade clamp mechanism. For the best results possible, look for a narrow blade that has lots of small teeth, such as a T-shank. [7]
    • High-quality jigsaws normally cost between $80 and $200. Look for them at home improvement stores.
    • For safety, unplug your device before installing the blade.
  2. Set your plank of wood on a sturdy working table and position it so the area you need to cut hangs over the edge. Then, place large clamps around the edges of your MDF piece to keep it from moving around.
    • If the area you’re cutting is in the middle of the MDF piece, place each end of the wood on a sturdy table or saw horse.
  3. Using a pencil, draw a line on the surface of the wood showing where you intend to cut it. If necessary, use a drafting compass or stencils to create more precise curves.
  4. Place the front of your jigsaw’s shoe at the start of the area you want to cut. Make sure the device’s blade lines up with your marked line, then turn the saw on and ease it into the wood. MDF is incredibly dense, so use slow, gentle motions to work your way through it. [8]
    5. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You’ll Need

      Straight Cuts

      • MDF piece
      • Circular saw with a sturdy blade
      • Solid working table
      • Heavy-duty clamps
      • Pencil or woodworking tape
      • Tape measure
      • Level or L-square

      Curved Cuts

      • MDF piece
      • Jigsaw with a bi-metal blade
      • Solid working table
      • Heavy-duty clamps
      • Pencil
      • Drafting compass or stencils (optional)

      You Might Also Like

      How to
      Make a Puzzle
      How to
      Cut Quarter Round
      How to
      Join Two Pieces of Wood
      How to
      Make a Shadow Box Frame
      How to
      Make a Door
      4 Ways to Bend Wood Without Breaking It
      How to
      Break a Wood Glue Joint
      How to
      Build a Gallows
      How to
      Plane a Door
      How to
      Calculate Board Feet
      How to
      Glue a Puzzle
      How to
      Repair Screw Holes in Chipboard
      How to
      Miter Corners
      How to
      Make a Pilot Hole
      Advertisement

      References

      1. ↑ https://www.familyhandyman.com/woodworking/woodworking-tips/what-is-mdf-plus-tips-for-using-mdf/view-all/
      2. ↑ https://www.familyhandyman.com/woodworking/woodworking-tips/what-is-mdf-plus-tips-for-using-mdf/view-all/
      3. ↑ https://www.familyhandyman.com/woodworking/woodworking-tips/what-is-mdf-plus-tips-for-using-mdf/view-all/
      4. ↑ https://www.familyhandyman.com/tools/circular-saws/circular-saw-tips-and-techniques/view-all/
      5. ↑ https://www.youtube.com/watch?v=nvVFXJp-T40&feature=youtu.be&t=1m36s
      6. ↑ https://www.bhg.com/home-improvement/remodeling/carpentry/how-to-use-a-circular-saw/
      7. ↑ https://www.popularmechanics.com/home/tools/reviews/g1334/6-tips-to-get-the-most-from-your-jigsaw/
      8. ↑ https://www.bobvila.com/articles/how-to-use-a-jigsaw/

      About This Article

      Article Summary X

      Before cutting your MDF, put on gloves, a long-sleeved shirt, goggles, and a dust mask for safety. To make a straight cut, first grab a circular saw and attach a thick, sturdy blade to it. For the best cut possible, adjust the blade so that its bottom tip sits slightly lower than the side of your wood piece. When you’re ready to make the cut, secure the MDF to a sturdy working table and draw a line over the spot you want to cut through. Then, turn your saw on and gently guide it through the cutting line. If you want to make a curved cut, scroll down to learn how!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 114,499 times.

      Did this article help you?

      Advertisement