You don’t have to pay for new hardwood floors or replace your wooden dresser to get a darker-wood look. There are several simple, affordable ways to make wood darker that you can do right at home. By using a chemical wood stain, or trying a more natural stain like coffee or black tea, you can give the wood in your home the dark finish you’re looking for.
Steps
-
Set up your workstation in a well-ventilated area. Lay down tarp or newspaper to catch wood dust and stain drippings. If you're working inside, open up any windows and use a box fan for air flow.
-
Sand the wood using 120-grit sandpaper. Sand in the direction of the grain to avoid leaving scratches on the wood’s surface. Stop once you've done a light sanding over the entire surface of the wood. [1] X Research sourceAdvertisement
-
Finish smoothing the surface of the wood with 220-grit sandpaper. Use the higher-grade sandpaper to help smooth out any roughness left from the first round of sanding. Make sure the wood feels completely smooth when you’re finished. [2] X Research source
-
Apply a coat of wood conditioner to the wood using a paintbrush. You can find wood conditioner in a can at your local hardware store. You want to apply the wood stain within two hours of brushing on the conditioner. [3] X Research source
-
Open the wood stain and stir it thoroughly before you use it. Scrape the bottom of the can with the stirrer so any stain color settled at the bottom gets mixed in. [4] X Research source
-
Use a paintbrush or cloth to apply one coat of wood stain to the wood. Paint or rub the stain on, going in the direction of the grain. Try to get an even coverage across the surface of the wood.
-
Let the wood stain set into the wood for five minutes. If you want the wood to be less dark, leave the stain on for a shorter amount of time. [5] X Research source
-
Wipe off the excess wood stain from the wood with a cloth. Wipe off the stain in the direction of the wood grain. [6] X Research source
-
Allow the stained wood to dry per the directions on the stain’s label. Check the label to see how long you should wait before adding a finish to the wood. [7] X Research source
-
Apply a polyurethane or lacquer finish to protect the wood. Wipe down the surface of the wood with a cloth first to remove any specks of dust. [8] X Research source
-
Bring two cups (473 milliliters) of water to a boil. Keep the water boiling until you’re ready to transfer it. [9] X Research source
-
Pour the boiling water into a heat-resistant container. Use a container with a wide enough opening for a paintbrush. [10] X Research source
-
Steep two black tea bags in the container of water for 24 hours. Leave the tea bags in the container for the entire 24 hours so the mixture fully darkens. [11] X Research source
-
Put a steel wool pad and 16 ounces of apple cider vinegar in a bowl. Use a 0000-grade steel wool pad for the best results. Let the steel wool soak in the apple cider vinegar for 24 hours. [12] X Research source
-
Use a paintbrush to brush the black tea onto the wood. Make sure you cover every part of the wood’s surface that you want to darken. [13] X Research source
-
Let the wood and black tea sit for an hour. You want the black tea to fully absorb into the wood before you apply the next coat of stain. [14] X Research source
-
Apply the steel wool/vinegar mixture to the wood using a paintbrush. Paint on the mixture in the direction of the wood grain. Make sure you cover the entire surface of the wood with the mixture to prevent patches and streaks. The mixture will cause the wood to oxidize, and you should start to notice the wood turning darker. [15] X Research source
-
Let the wood dry for an hour. If it’s not as dark as you wanted, or there are patches on the surface, go over the wood again with the black tea and the steel wool/vinegar mixture. [16] X Research source
-
Fill a bowl with one cup (237 milliliters) of dark coffee grounds. Make sure the bowl you use is heat resistant.
-
Pour 1 ¼ cup (296 milliliters) of boiling water over the coffee grounds. Pour the water slowly so it doesn't splash or cause the coffee grounds to pour over the side of the bowl.
-
Let the coffee grounds sit for 30 minutes. Wait longer than 30 minutes if the mixture isn't completely cool by then.
-
Place a coffee filter in a mesh strainer. Make sure the coffee filter is open and positioned in the center of the strainer.
-
Hold the mesh strainer over a container and pour in the coffee mixture. Use a container with an opening big enough for a paintbrush to fit through. Set aside the container after you fill it.
-
Set up your workstation. Work outdoors if you can to avoid a mess. If you can’t work outside, lay down a tarp inside to set the wood on.
-
Sand the wood using a fine-grade sandpaper. Find a sandpaper that is between 180-220 grit at your local hardware store. Gently sand the wood in the direction of the grain until it’s smooth.
-
Use a paintbrush to brush the coffee mixture onto the wood. Avoid applying too much of the mixture or it may pool on the wood’s surface. Once you’ve covered the entire surface of the wood with the mixture, let the wood dry.
-
Apply more coats until you achieve your desired darkness. Let the wood dry in between each coat. Apply a finish once the last coat dries if you want to seal the wood.
Expert Q&A
Video
Tips
Things You'll Need
- Tarp
- Sandpaper
- Wood conditioner
- Wood stain
- Paintbrush
- Cloth
- Wood finish
- Heat-resistant container
- Black tea bags
- Steel wool pad
- Apple cider vinegar
- Coffee grounds
- Coffee filter
- Mesh strainer
References
- ↑ https://www.hgtv.com/design/topics/painting
- ↑ https://www.hgtv.com/design/topics/painting
- ↑ https://www.hgtv.com/design/topics/painting
- ↑ https://sc82.rustoleum.com/pages/homeowner/tips-and-techniques/wood-staining/how-to-stain-wood
- ↑ https://sc82.rustoleum.com/pages/homeowner/tips-and-techniques/wood-staining/how-to-stain-wood
- ↑ https://sc82.rustoleum.com/pages/homeowner/tips-and-techniques/wood-staining/how-to-stain-wood
- ↑ https://sc82.rustoleum.com/pages/homeowner/tips-and-techniques/wood-staining/how-to-stain-wood
- ↑ https://sc82.rustoleum.com/pages/homeowner/tips-and-techniques/wood-staining/how-to-stain-wood
- ↑ https://www.blesserhouse.com/2015/01/the-most-natural-inexpensive-way-to.html
- ↑ https://www.blesserhouse.com/2015/01/the-most-natural-inexpensive-way-to.html
- ↑ https://www.blesserhouse.com/2015/01/the-most-natural-inexpensive-way-to.html
- ↑ https://www.blesserhouse.com/2015/01/the-most-natural-inexpensive-way-to.html
- ↑ https://www.blesserhouse.com/2015/01/the-most-natural-inexpensive-way-to.html
- ↑ https://www.blesserhouse.com/2015/01/the-most-natural-inexpensive-way-to.html
- ↑ https://www.blesserhouse.com/2015/01/the-most-natural-inexpensive-way-to.html
- ↑ https://www.blesserhouse.com/2015/01/the-most-natural-inexpensive-way-to.html
About This Article
Darkening wood at home is an easy and affordable way to give your furniture new life. One way to darken wood is with tea and apple cider vinegar. To use tea, first, let 2 black tea bags steep in hot water for 24 hours. In a separate bowl, soak a steel wool pad in apple cider vinegar. Use a paintbrush to brush the black tea onto the wood. After an hour, paint the wood with the apple cider vinegar, which will help the wood oxidize and darken. You can also use coffee to stain wood. First, pour boiling water over 1 cup of dark coffee grounds. Let it sit for 30 minutes before straining the grounds. Gently sand the wood in the direction of the grain. Then, brush on a couple of layers of the coffee. To learn how to use commercial stain to darken wood, read on!