How to Design a Simple Antenna

PDF download Download Article
PDF download Download Article

This article will show you how to build a monopoly for any use you see fit.

1

Choose a frequency.

PDF download Download Article
  1. For Wi-Fi you are using 2.45GHz = 2,450,000,000Hz). This is needed because this determines the length of your antenna.
    2. Advertisement
2

Get a conductor.

PDF download Download Article
  1. For the example we can use a copper wire and a piece of copper plating. Also you will need a co-axial cable (75 ohm is better than 50 ohm, for Wi-Fi 50 ohm is better than 75 ohm).
3

Determine the wire length.

PDF download Download Article
  1. This is done by using the frequency value from step 1 to find the wavelength of the signal. To do this you simply need to divide the speed of light (c = 299 792 458 m/s) by the frequency (f). In the case of 2.45GHz the wavelength is 12.236 centimeter (4.8 in). Usually monopole antennas are quarter-wavelength structures, so the length of the wire should be 12.236/4 = 3.0509cm
    2. Advertisement
4

Cut the wire.

PDF download Download Article
  1. Cut about 3.2 centimeter (1.3 in) for a quarter-wave monopole. This way you can pare it back based on performance (and "tune" if needed) .
5

Form a ground-plane.

PDF download Download Article
  1. Simply use the copper plate that you picked up earlier. It should be at least half a wavelength square.
    2. Advertisement
6

Drill a hole.

PDF download Download Article
  1. The whole should be just big enough for the co-axial cable to fit through.
7

Pare the coaxial cable.

PDF download Download Article
  1. This can be pulled back to reveal the inside insulator.
    2. Advertisement
8

Feed the cable through.

PDF download Download Article
  1. The ground conductor is now above the ground-plane. Fold the ground conductor back and solder it to the copper ground plane.
9

Reveal the signal conductor.

PDF download Download Article
    2. Advertisement
10

Solder the wire.

PDF download Download Article
  1. You now have an antenna.

Community Q&A

Search
Add New Question
  • Question
    What metal is in copper plates?
    Community Answer
    Presumably, copper, as it's called a copper plate.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 35
  • Question
    Which direction should I set the antenna?
    Denneisk
    Top Answerer
    You should point the antenna in a direction that would make it most useful, e.g. point an antenna connected to your router toward the opposite end of the house.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 10
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • The radiation pattern is null at the tip of the wire so make sure that you keep the antenna perpendicular to the source of the radio signals
        Thanks
        Helpful 5 Not Helpful 0
      • Make sure the wire is perpendicular to the ground plane
        Thanks
        Helpful 2 Not Helpful 1
      • The Antenna has a pretty much circular pattern when viewed from the top, so it should pick up your signal no matter where you decide to place it.
        Thanks
        Helpful 1 Not Helpful 1
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      • Coaxial Cable
      • Copper Plate

      You Might Also Like

      How to
      Extend Wireless Range of a Wireless Keyboard and Mouse
      How to
      Set Up and Connect to a Wi-Fi Network: Easy Guide
      How to
      Hook Up a TV Antenna
      Create a Cheap Wi-Fi Antenna at Home: DIY Guide
      How to
      Make an FM Antenna
      How to
      Build Antennas
      How to
      Make a Wifi Antenna
      How to
      Calculate Wind Load
      How to
      Use Your Home Wiring as a TV or Radio Antenna
      How to
      Make a HDTV Antenna
      Why Is My Antenna Not Picking Up Channels?
      How to
      Make a TV Antenna with a Coat Hanger
      2 Ways to Repair a Radio Antenna: Aluminum Foil & Soda Can
      How to
      Tune an Antenna
      Advertisement

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 219,037 times.

      Is this article up to date?

      Advertisement