How to Dye Leather

Co-authored by Carroll Kelly

Last Updated: February 16, 2024 Approved

Whether you are creating a new leather item or restoring an old one, leather dying instructions can quickly take you to your finished product. Knowing how to dye leather will allow you to easily change the color of a leather item. Keep in mind that every piece of leather is different and may accept the color a little differently.

Method 1

Method 1 of 3:

Using Commercial Leather Dye

Download Article

1
Choose your leather dye. Most commercially prepared leather dyes come with leather preparer, the dye itself, and a finish (such as leather sheen). Consider the following when choosing a dye:
- Alcohol-based dyes stiffen the leather, while water-based dyes leave it soft and supple. Many water-based dyes are actually coatings, which can completely change the color of the piece.
- The color of the dye is not representative of the final color. Test on a small sample first. If you are touching up an already dyed piece, use a color-matching service to get an exact match.
- Dyes can be spray-on, paint-on, or sponge-on. Choose the type that works best for you in terms of ease of use.
Cover any buckles or metal pieces that you do not want dyed with masking tape. The tape may damage the leather finish, but you'll be removing that anyway to make the surface available for dyeing.

Advertisement
3
Move to a well-ventilated area. Most leather preparers and leather dyes release fumes that are unhealthy to breathe. Work in a space with good ventilation. If dyeing your leather outdoors, keep it out of direct sunlight and extreme heat.
- Most dyes give best results at air temperatures of 60ºF (15ºC) or above. ^{[1]
  X
  Research source}
Leather dye can stain skin for a week and other surfaces permanently. Wear two pairs of latex or nitrile gloves. Lay down plastic drop cloth to catch spills.
Rub the leather preparer or de-glazer on with a clean cloth. This removes the leather finish so the dye can penetrate evenly into the material.

EXPERT TIP

Mallika Sharma
Certified Leather Care Technician
Mallika Sharma is a Certified Leather Care Technician and the Founder of The Leather Laundry, a niche spa service for luxury leather gear in India. Mallika specializes in leather cleaning, coloring, repairing, and restoring for shoes, handbags, jackets, wallets, belts, and sofas. She holds a Master’s degree in Finance and Investment from the University of Edinburgh Business School. Mallika is a certified Professional Leather Care Technician and trained with the globally reputed leather care company, LTT in the United Kingdom.

Mallika Sharma
Certified Leather Care Technician

Prep leather before painting it. Properly preparing the surface of leather before painting it helps the color fully absorb for a smooth, even finish. First clean the leather thoroughly with a solvent like thinner, rubbing alcohol or ammonia to open up and clear out the pores. Then, airbrush on leather paint, followed by applying a fixing agent or sealant on top to properly set and seal in the painted color.
6
Wet the leather. Use a spray bottle filled with water to dampen the surface of the leather. Do not over-saturate the leather, but make sure you have an even covering. This helps the leather absorb the dye evenly, resulting in a smooth finish.
- Some leather dyes do not require this step. Check the label.
7
Apply your first coat. Start by painting the edges with a paintbrush. For the rest of the job, apply the dye in a thin coat using a sponge, wool dauber, paintbrush, or sprayer. Check the dye label to see which tool the manufacturer recommends, or weigh the following pros and cons:
- Sponges can apply a special affect or texture to the leather. Apply in a circular motion for an even look.
- Wool daubers are easy to use when applying liquid dye to small areas. They may not work well with gel dyes.
- Paintbrushes are good for edges and small areas, but it is hard to hide the brush strokes over large areas. Apply the first layer left to right, the second up and down, and the next layer in circular motions to ensure even coating.
- Sprayers makes it easy to blend colors for repairs or multi-color dye jobs. An airbrush or touch-up spray gun provides the most control. ^{[2]
  X
  Research source} Check the dye instructions to see if it is suitable for spraying.
Let the first coat dry a little, then apply another one. Repeat with additional coats of leather dye until it reaches the desired color, usually after three to six coats. ^{[3]
X
Research source} Applying several thin coats makes it easier to achieve a uniform color.
Allow the leather to dry for at least 24 hours. Pick it up and flex it occasionally (wearing gloves) to prevent it becoming rigid. The leather may feel sticky at first, but this should disappear after buffing or applying leather sheen.
Buffing with a cloth removes any dye residue and polishes the surface of the leather. You may use leather sheen to leave a shiny finish on the leather.

Method 2

Method 2 of 3:

Using Vinegar and Rust

Download Article

1
Use vinegar and rust to dye leather black. This old-fashioned recipe, called vinegaroon or vinegar black, is a cheap and easy way to permanently dye your leather dark black. The color will not rub off onto fingers or clothes, and you can save the leftover dye for later use.
- This method works best on vegetable-tanned leather (or antique pit-tanned leather). If the leather is already dyed, it was probably chrome-tanned and sealed, and vinegaroon will not give good results.
2
Choose a source of rust. You can use uncoated iron nails, iron shavings, or any other material that will rust (and ideally has already started to rust). Steel wool is one of the fastest options, since you can tear it into small fragments, but it has an oil coating to prevent rust. Get rid of this first by dunking the steel wool in acetone, squeezing it out, then letting it dry completely.
- Acetone can irritate skin, but occasional contact shouldn't cause lasting harm. ^{[4]
  X
  Research source} Wearing latex gloves is recommended. ^{[5]
  X
  Research source}
Heat about a half gallon (two liters) of white vinegar or apple cider vinegar until it is hot, but not too hot to touch. Pour it back into the container it was sold in, or into any convenient container.
4
Drop the metal into the vinegar. Over time, the rust (iron oxide) will react with the vinegar (acetic acid). This form a substance called ferric acetate, which reacts with tannins to dye the leather.
- The amount of iron to add depends on the concentration of the vinegar. The easiest approach is to start with a large quantity (thirty nails, as a ballpark estimate), then keep adding metal until it stops dissolving. ^{[6]
  X
  Research source}
5
Keep in a warm, ventilated container for at least a week. Punch a hole in the lid to let off gases, or the container could explode. Close the lid and put the container in a warm location for at least a week or two. The "vinegarroon" is ready when the iron is dissolved and there is no strong vinegar smell.
- If it still smells strongly of vinegar, add more iron. If there's already iron in there, heat over the stove to speed up the reaction.
- Once almost all of the acetic acid is gone, any remaining iron will rust normally, turning the liquid reddish. At this point you can leave the lid off for a couple days to help the last dregs of the acetic acid evaporate.
Run the vinegaroon through paper towels or coffee filters repeatedly until the liquid is free from solids.
7
Soak your leather in black tea. Brew an extra-strong black tea, then let the water cool. Soak the leather in it to add extra tannin. This will improve the effects of the vinegaroon, and help prevent cracking.
- Professional leather workers sometimes use tannic acid or logwood extract instead.
8
Soak the leather in vinegaroon for thirty minutes. The liquid will penetrate into the leather and add a deep, permanent dye. Don't be alarmed if the color looks grey or bluish. It should deepen to black during the process, and become darker after oiling.
- It's a good idea to test a similar piece of scrap leather first, or one corner of the object. If it cracks after a couple days, dilute the vinegaroon in water and try again.
Mix 3 tbs. (45 mL) baking soda in one quart (1L) of water. Saturate the leather with the solution and then rinse with clean water. This neutralizes the acid in the vinegar solution to keep your leather from disintegrating later on.
While the leather is still damp, rub your favorite leather oil over the surface. You may need two coats of the oil to fully condition the leather. Choose the oil that works best for your leather product by testing on a small portion of the leather.

Method 3

Method 3 of 3:

Using Mink Oil

Download Article

1
Use mink oil when you only want to darken the leather. ^{[7]
X
Expert Source

Carroll Kelly
Shoe Care Specialist

Expert Interview. 17 December 2020.} Mink oil is a natural substance that lubricates and soaks into leather to condition it. Mink oil also has waterproofing abilities and protects from salt, mildew, mold and other elements.
- Warning: Mink oil is controversial, since it can leave an oily layer that repels other products (making further polishing or enhancement difficult). Worse, "mink oil" products are not standardized, and may contain silicone or other ingredients that can damage your leather. ^{[8]
  X
  Research source} Research product reviews before using it on high quality leather.
Before dyeing, ensure the leather is free of dust, dirt, or other extraneous material. Use a brush or lightly damp cloth to remove any dirt or dust from the surface.
3
Place leather in the sun. Gently warm up your leather in the sun. Heating the leather helps the mink oil "pull" the dye into the leather, making it permanent and indelible.
- You should never place your leather in the oven to warm it; it is very easy to ruin the leather.
Place the bottle of mink oil into a container filled with hot water to gently heat up the oil. This will ensure an even coating of mink oil on your leather by helping to pull the oil into the leather. ^{[9]
X
Research source}
Use clean, smooth strokes from an oil-soaked cloth to spread the mink oil across the length of the leather. Give the leather an even coating to ensure an even finish. You may need to make multiple applications to get to the desired darkness.
Occasionally move the leather back and forth so that the leather does not stiffen. This also helps to work the oil into the leather.
For a pleasing, shiny finish give your cooled leather a buffing with a clean brush or cloth. Buff the leather by rubbing the cloth in circles.
8
Handle your finished leather cautiously. Be careful when handling or wearing the leather after finishing the process, as it's possible for fresh oil to rub off onto clothes, skin, or anything else it comes into contact with in the first few weeks after dying.
- You may want to keep your dyed leather in a safe place in your closet until the dye fully sets to prevent accidental stains.
- If you are unhappy with the shade of your finished leather, repeat this entire process as needed for deeper color saturation.

Community Q&A

Search

Add New Question

Question

I spilled some coffee on a leather satchel, leaving a discolored spot. Could apply coffee to the rest of the satchel to even out the color, or is this risky?

Rubnrestore

Community Answer

Great idea! The only trouble you may encounter is a bold ring or perimeter around the original stain, which may be difficult to conceal. Before staining with more coffee, try cleaning the original stain (or lightening the ring) with white vinegar.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 15
Question

Do these methods work on all types of leather?

Rubnrestore

Community Answer

No. There are many types of leather, distinguished by the method of tanning. Suede, for example, has a fuzzy nap and is very absorbent. It easily stains and can be etched and stiffened by liquids, so dyeing is not recommended. Many full-grain or corrected-grain leathers, on the other hand, have a polyurethane coating that resists oil and natural homemade dyes made with plants, coffee, or tea. These leathers require a leather dye or coating to restore or change the color.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 11
Question

How can I dye the edge of black belt that was cut by Amish leather (was dyed first, then cut to length and buckle put on)?

Community Answer

Even many of the pros use a black Sharpie on the edges.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 5 Helpful 19

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

If you need to condition your leather then you should do this after dyeing the leather or else the dye will not show an even finish.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Always test your dye method on a small, unseen portion of the leather to avoid ruining the leather.

Thanks
Helpful 9 Not Helpful 3

Things You'll Need

leather dye kit, vinegar and rusty metal, mink oil or tea bags (depending on method)
2 clean cloths
sponge or wool dauber
spray bottle

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

Expert Source

Carroll Kelly
Shoe Care Specialist

[8]

[9]

Log in

How to Dye Leather

Steps

Using Commercial Leather Dye

Using Vinegar and Rust

Using Mink Oil

Community Q&A

Tips

Warnings

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories