How to Dye Rubber

PDF download Download Article
PDF download Download Article

If you want to dye your rubber object, you can try several different techniques for a strong and lasting color. Rubber takes a long time to absorb colors, but with the right materials, you can permanently dye it. Depending on the type of rubber, you can use either fabric or hair dye to change the rubber's color. And, if permanent dyes don't provide a bright enough color, you can always try temporarily coloring the rubber with acrylic paints.

Method 1
Method 1 of 3:

Using Fabric Dyes on Rubber

PDF download Download Article
  1. If your object is dirty, its dyed surface may look uneven or discolored. Wash your object with soap and warm water, scrubbing away any debris as best as you can. [1]
    • This method works for all rubber types except silicone.
  2. Fill a pot with water and heat it on a low to medium stove setting. The water should be hot, but not boiling—close to, but less than 212 °F (100 °C) is ideal.
    • Be careful when handling the hot water to prevent burns or spills.
    • For a more precise measurement, use a water thermometer. Otherwise, wait for the water to start forming bubbles at the bottom of the pot but not yet boil.
    Advertisement
  3. Watermark wikiHow to Dye Rubber
    Pour the fabric dye and hot water in a bowl in a ratio determined by the dye packaging. Mix the fabric dye and water thoroughly until you achieve an even color. [2]
    • You can buy fabric dye online or at most craft stores.
    • Fabric dye can stain bowls and other cooking tools, particularly plastics. To prevent this, use glass or metal cooking tools if possible.
  4. Watermark wikiHow to Dye Rubber
    Place the object in the bowl and leave it to soak. Keep it in the pan for up to 2 hours, depending on how strong or bright you want the new color to be. [3]
    • As long as you clean and sanitize the kitchen utensils afterward, you can use them for cooking again later.
    • Check on the object's dyeing progress periodically, but avoid moving it to keep its new color even.
  5. Instead of pouring the water into a bowl, fill a pot with the dye mixture and heat it until boiling. Grab the rubber object with tongs and dip it into the water continually until you reach your desired color, changing the tongs' position as you dip to make sure you thoroughly coat the object. [4]
    • If you choose this method, it should take up to 20-25 minutes depending on the brightness of the color.
    • This method, while faster, can result in a more uneven color.
  6. Pick the object out of the water with tongs and run it under warm water to remove the excess dye. Inspect the object's new color and, if it's not as bright as you would prefer, repeat the process with a higher concentration of dye.
    • Repeatedly dyeing the rubber over time may damage it. If you don't achieve the color you want after 1-2 times, try painting it instead.
    7. Advertisement
Method 2
Method 2 of 3:

Trying Hair Dye on Silicone Objects

PDF download Download Article
  1. Dyeing silicone objects while they're dirty can result in an unevenly dyed color. Clean your silicone object with soap and water, and scrub away any stubborn debris or chipped paint before preparing the dye.
  2. Watermark wikiHow to Dye Rubber
    Open the hair dye package and mix it according to the kit's instructions. Most kits include a bottle of hair dye and a developer, which you mix thoroughly until you reach an even color. [5]
    • Find a well-ventilated area to mix the hair dye, as most chemical dyes have a strong smell.
    • Buy chemical, not natural, hair dyes for a bright and lasting color.
  3. Watermark wikiHow to Dye Rubber
    Dip the silicone objects into the hair dye until their surface is thoroughly coated. Leave the objects in the container while fully coated in the dye to soak in the new color. [6]
    • This method is ideal for small silicone objects. For larger silicone objects, you may need to make several hair dye batches.
  4. Silicone is difficult to dye, and it takes a long time for color to permeate its surface. Leave the silicone to soak in the hair dye overnight, and remove it from the solution the next day. [7]
    • The water's temperature should be neither hot or cold but lukewarm.
    • The longer you leave it in the dye, the deeper its color will be.
  5. Run your silicone object under water to remove any excess dye, then inspect its new color. If the color is still too light or faded, try dyeing the object again or painting it instead.
    • You can also try a stronger or brighter hair dye for a deeper color.
  6. UV light can break down the colors in hair dye and cause it to fade. Keep your silicone object indoors to preserve its color and prevent discoloration. [8]
    • Apply a new dye coat and keep it away from UV light if your dyed color fades over time.
    • If you don't achieve the color you want after 1-2 times, try painting it instead, as too much dyeing can damage the silicone.
    7. Advertisement
Method 3
Method 3 of 3:

Coloring Rubber Temporarily with Acrylic Paints

PDF download Download Article
  1. Rubber is especially prone to chipping or flaking after being painted. If you want to paint rubber, buy acrylic paints online or from a craft store for a lasting color. [9]
    • Painting rubber is the most temporary way to stain objects. Choose this method if you're unsure how permanent you want your dyed color to be.
  2. Watermark wikiHow to Dye Rubber
    Mod Podge helps the paint stick to your object and prevent the color from flaking. Use a paint brush to cover the surface in a thin Mod Podge layer, and let it dry for 15-20 minutes. [10]
    • Clean the rubber with soap and water first to remove debris for a more secure paint job.
    • If you have any areas you don't want to paint, affix painter's tape over these areas before applying the Mod Podge.
    • You can buy Mod Podge from most home improvement or craft stores.
  3. Watermark wikiHow to Dye Rubber
    Dip a foam brush into the acrylic paint and apply it in even layers to the rubber object. When you've covered the entire surface in the paint, let it dry for 30-60 minutes and inspect the color's brightness. [11]
    • For a stronger color, apply 2-3 coats of paint. Wait for each coat to dry before applying another one, which should take between 30 minutes to an hour.
  4. Watermark wikiHow to Dye Rubber
    After the last paint coat dries, hold the paint sealer's nozzle 1–2 inches (2.5–5.1 cm) from the surface and spray an even coating over the rubber. Let the paint sealer dry for 30-60 minutes before touching or using the rubber object. [12]
    • Even with paint sealer, acrylic paint may flake or chip over time. Reapply paint coats as needed to restore the rubber's color, spraying more paint sealer afterward.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    I have white rubber around the windows of my camper. I want them black. Any advice?
    Community Answer
    You can buy black wall paint, but you have to use painter's tape on the window and around it (anything you don't want black that is near the rubber) because you need to cover the spots you don't want painted otherwise it will stain.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 4
  • Question
    Which type of paint should we use?
    Beverly Close
    Community Answer
    For indoor items made of rubber that will not get a lot of wear and tear, use acrylic craft paint. You may need to use two coats, and be sure to let the paint dry thoroughly between coats. After the paint is completely dry, seal it. Find a paint sealer in the paint department at a craft or home improvement store. If you plan to paint an item that will remain outside, use a durable, non-toxic outdoor paint. Before starting the painting project, coat the rubber with an exterior primer to help the paint adhere, and let it dry completely. You can either brush on the paint or use spray paint.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 2
  • Question
    How do you permanently dye rubber?
    Drew Hawkins1
    Community Answer
    Try using fabric dye. Start by cleaning the rubber really well so the dye will stick to it more effectively. Fill a pot with water and heat it on a low to medium stove setting so it's hot but not boiling. Add the fabric dye into the hot water and mix it thoroughly until the color is even. Place the object in the bowl and leave it to soak for up to 2 hours, then remove it from the water and rinse off the excess dye. If you want the color to be stronger, you can repeat the process 1-2 more times until you're satisfied.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 5
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Wear gloves while handling paints or dyes and wash your hands immediately afterward to prevent staining your skin. [13]
        Thanks
        Helpful 0 Not Helpful 0
      • When dyeing rubber, set up newspapers or a tarp over your workplace to avoid staining other objects.
        Thanks
        Helpful 0 Not Helpful 0
      • Wear clothes you can get dirty in while dyeing rubber in case of accidental stains.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Most dyes are permanent and difficult or impossible to remove after using. Do not dye your rubber unless you're positive that you want to change its color.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You'll Need

      Using Fabric Dyes on Rubber

      • Water
      • Soap
      • Fabric dye
      • Bowl
      • Pan
      • Tongs
      • Pot (optional)

      Trying Hair Dye on Silicone

      • Soap
      • Water
      • Hair dye
      • Cup or bowl

      Coloring Rubber Temporarily with Acrylic Paints

      • Acrylic paints
      • Mod Podge
      • Foam brush
      • Paint sealer

      You Might Also Like

      Beat Boredom with These Creative Craft Ideas
      How to
      Make a Rubber Band Star
      How to
      Make a Cooler from Insulating Material
      How to
      Create a Time Capsule That’ll Withstand the Test of Time
      How to
      Build a Homemade Rube Goldberg Machine
      How to
      Make a Coupon Book for Tasks
      6 Simple Icee Slime Recipes: Blue Raspberry, Cherry, & More
      How to
      Make DIY Fabric Bows without Sewing
      How to
      Build a Nativity Stable
      How to
      Cut Popsicle Sticks
      How to
      Make a Tin or Aluminum Foil Hat
      How to
      Build a Homemade Jack in the Box Toy
      How to
      Make Liquid Starch
      Simple Steps to Clean & Polish Luxury Vinyl Plank Flooring
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=yqsG_25shwY&feature=youtu.be&t=112
      2. ↑ https://ourpastimes.com/dye-rubber-soles-8750128.html
      3. ↑ https://ourpastimes.com/dye-rubber-soles-8750128.html
      4. ↑ https://www.youtube.com/watch?v=yqsG_25shwY&feature=youtu.be&t=90
      5. ↑ https://chipmusic.org/forums/topic/8581/how-to-dye-silicone-startselect-buttons/
      6. ↑ https://chipmusic.org/forums/topic/8581/how-to-dye-silicone-startselect-buttons/
      7. ↑ https://chipmusic.org/forums/topic/8581/how-to-dye-silicone-startselect-buttons/
      8. ↑ https://www.elle.com/beauty/advice/a27664/7-things-that-destroy-your-hair-color/
      9. ↑ https://hoosierhomemade.com/how-to-paint-a-recycled-rubber-outdoor-mat/#
      1. ↑ https://www.youtube.com/watch?v=82-t4WLdrwk&feature=youtu.be&t=18
      2. ↑ https://hoosierhomemade.com/how-to-paint-a-recycled-rubber-outdoor-mat/#
      3. ↑ https://hoosierhomemade.com/how-to-paint-a-recycled-rubber-outdoor-mat/#
      4. ↑ https://www.youtube.com/watch?v=yqsG_25shwY&feature=youtu.be&t=112

      About This Article

      Article Summary X

      If you want to dye your rubber at home, there are a few different methods you can try. One easy way to dye your rubber is using fabric dye. All you need to do is mix some fabric dye into a pot of boiling water, then turn off the heat and soak your object in the mixture for 1 or 2 hours. For silicone objects, you can also use hair dye. Just mix your dye in a bowl, submerge your item in it, and leave it to soak overnight. For a temporary solution, use acrylic paint. First, apply a sealer, glue, and finish product, like Mod Podge, to help the paint stick. Then, coat your item with acrylic paint. Even with sealer, your rubber may flake over time and you may need to reapply the paint and sealer. For more tips, including how to prevent your dyed rubber item from fading, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 171,026 times.

      Did this article help you?

      Advertisement